CROSS OVER TIE ROD/DRAG LINK CUSTOM (TDSTR-ASSEMBLED)

THIS IS A TIG WELDED AND FULLY ASSEMBLED SYSTEM, HOWEVER DUE TO VARIANCES IN VEHICLES WE REQUIRE SOME MEASUREMENTS TO TAILOR THE LINKAGES TO YOUR VEHICLE.
WE WILL NEED MEASUREMENTS FROM THE CENTERS OF THE TIE ROD HOLE FROM:
-STEERING KNUCKLE TO STEERING KNUCKLE. (WHEN VEHICLE IS STEERING STRAIGHT AHEAD)
-PITMAN ARM TO PASSENGER STEERING KNUCKLE.
-WE WILL ALSO NEED IF YOU ARE USING TIE ROD OVER OR TIE ROD UNDER YOUR STEERING KNUCKLE?

REQUIRES REAMING OF KNUCKLES AND PITMAN ARM.
DANA 30 AND 44 KNUCKLES AND PITMAN ARM WILL NEED TO BE REAMED TO ACCEPT THE LARGER DIAMETER DANA 60 TIE ROD ENDS.
CALL OR EMAIL US WITH THE REQUIRED MEASUREMENTS.