- Home »
- Catalog
Complete Offroad » Ford, F-150 1/2 Ton
Products for:
- Make: Ford
- Model: F-150 1/2 Ton
View Universal items for: Ford F-150 1/2 Ton
Browse Products
Description: 0.080" thick Chrome cover for Dana 44.
Item #: YP C1-D44-STD
Condition:
New
Price: $54.89
Description: Chrome Cover for 8.8" Ford.
Item #: YP C1-F8.8
Condition:
New
Price: $54.89
Description: Chrome Moly cross pin shaft for Mini-Spool for 9" Ford HD.
Item #: YP MINSXF9
Condition:
New
Price: $47.89
Description:
Fits Dana Spicer 30 and 44 and GM 8.5" front
4340 Chromoly cross
Eliminated needle bearings results in larger trunion for added strength
Uses ultra high grade antiseize for...More Details »
Item #: 297X-203
Condition:
New
Price: $521.99
Description: CLAMPS, 3.062" Yukon Ford 9" Drop Out new design ONLY.
Item #: YP DOF9-03
Condition:
New
Price: $10.89
Description: CLAMPS, 3.250" Yukon Ford 9" Drop Out new design ONLY.
Item #: YP DOF9-04
Condition:
New
Price: $10.89
Description: 8.8" Ford TracLoc Clutch Set (with long ears--for 99 and earlier models only), both sides.
Spider gear set YPKF8.8-T/L-31 and YPK8.8-T/L-28 available separately.
Item #: YPKF8.8-PC
Condition:
New
Price: $196.89
Description: 8.0" & 9.0" Ford 5-Tab Clutches (early Equalock).
Item #: YPKF9-PC-E
Condition:
New
Price: $358.89
Description: Complete inner bearing & race assembly for Ford 8.8", '10 & up Ford Mustang
Item #: KOY880015
Condition:
New
Please Call for Availability
Description: Dana 50 shim kit.
Item #: SK 707235
Condition:
New
Price: $61.04
Description: Conversion bearing & race to fit '11 & up Ford 9.75" ring & pinion in '00-'10 housing
Item #: KOYKEST5195
Condition:
New
Please Call for Availability
Description: Conversioon spacer to use 10.25" ring & pinion in '08 & up 10.5" housing.
Item #: SK F10.5-CONV
Condition:
New
Price: $41.55
Description: Cover bolt for Ford 7.5", 8.8" & 9.75"
Item #: YSPBLT-079
Condition:
New
Price: $5.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: YSPBLT-038
Condition:
New
Price: $5.89
Description: X/P bolt EXTRACTOR kit.
Item #: YT BE-01
Condition:
New
Price: $78.89
Description: Cross pin bolt with 5/16 x 18 thread for 10.25" Ford.
Item #: YSPBLT-059
Condition:
New
Price: $17.89
Description: Cross pin shaft (0.875") for '86 and newer 8.8" Ford.
Item #: YSPXP-026
Condition:
New
Price: $37.89
Description: Cross pin shaft with bolt for 9.75" Ford.
Item #: YSPXP-032
Condition:
New
Price: $41.89
Description: Crush sleeve for AMC Model 20, Ford 10.25", 10.5", 7.5", 8.8", 9" and 9.75"
Item #: YSPCS-002
Condition:
New
Price: $8.46
Description: 9" Ford 2 PIECE solid preload pinion spacer, Daytona or standard Open.
Item #: SK CSF9-2PIECE
Condition:
New
Price: $50.55
Description: 9" LARGE solid pinion preload spacer & shim kit for 35 spline pinion.
Item #: SK CSF9-BIGPIN
Condition:
New
Price: $106.41
Description: Crush sleeve spacer for Ford 9.75", 0.280" tall
Item #: YSPCS-053
Condition:
New
Price: $27.89
Description: Yukon Mighty Seals use the latest designs and manufacturing technologies to produce a precision fit, a tight seal and long life.
D44 FRONT WHEEL SEAL.. 57-77gm .. 59-94 ford.. 69-74 dodge 3/4
Item #: YMS442380
Condition:
New
Price: $12.87
Description: Yukon standard open spider gear kit for Dana Spicer 44 with 30 spline axles (all are without c-cup, including IFS). Yukon uses higher quality materials and better techniques than OEM to ensure a...More Details »
Item #: YPKD44-S-30
Condition:
New
Price: $196.89
Description: Replacement pinion seal for Dana 25, Dana 27, Dana 30, D36, Dana 44, & Dana 50 .Yukon Mighty seal.
Item #: YMS5778
Condition:
New
Price: $15.89
Description: Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Item #: YSPSR-005
Condition:
New
Price: $5.89
Description: Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).
Item #: YSPSR-007
Condition:
New
Price: $4.89
Description: Dana 30 & Dana 44 roll PIN, 0.235" DIA, for cross pin shaft.
Item #: YSPXP-007
Condition:
New
Price: $10.89
Description: 5/16" cover bolt, Dana 30, Dana 44, Model 20, Model 35, Dana 25, Dana 27, 7.5", 8.2", 8.5", 12.
Item #: YSPBLT-075
Condition:
New
Price: $8.08
Description: Dana 30/44 GM8.5" Four prong spindle nut socket with ring around the outside to aid in keeping the socket on the nut.
For quick & easy removal & installation of 4-slot front axle lock nuts on many...More Details »
Item #: W1269
Condition:
New
Price: $39.50
Description: Dana 44 & 9.25 Chrysler TracLoc CLUTCH KIT
INCLUDES CLUTCH PLATES AND GUIDE KEEPER CLIPS (GUIDE CLIPS PART# DS 40835)
Item #: YPKD44-PC-T/L
Condition:
New
Price: $124.89
Description: Dana 44 & Dana 50 crush sleeve (INCL ISUZU) APROX 2.650" long.
Item #: YSPCS-005
Condition:
New
Price: $10.89
Description: Dana 44 & Model 35 axle stud.
Item #: YSPSTUD-001
Condition:
New
Price: $5.89
Description: Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal replacement
Item #: YMS5131
Condition:
New
Price: $9.89
Description: Dana 44 30 spline Standard Open case, 3.92 & up, bare. This case includes carrier shims, roll pin, ring gear bolts and a cover gasket.
Item #: YC D706025-X
Condition:
New
Price: $170.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.
Item #: CK D44
Condition:
New
Price: $116.89
Description:
Front axle kit
Fits 1978-1979 Bronco and 1973-1979 F150
4340 Chromoly axles
30 spline inner axles
Includes inner and outer axle shafts with Spicer u-joints
Item #: YA W24134
Condition:
New
Price: $1,036.89
Description: Dana 44 Complete Shim Kit replacement
Item #: SK 706376
Condition:
New
Price: $35.40
Price: $9.89
Description: Drive flange CAP, SMALL.
Item #: YP DFC-SM-B
Condition:
New
Price: $99.89
Description: Drive flange, SMALL, Yukon ENGRAVED.
Item #: YP DFC-SM-Y
Condition:
New
Price: $99.89
Description: This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil...More Details »
Item #: ZBKD44
Condition:
New
Please Call for Availability
Description: Dana 44 IFS front spindle, 93 & up NON ABS. Comes with spindle bearing and seal kit.
Item #: YP SP707373
Condition:
New
Price: $313.89
Price: $4.89
Description: 1541H replacement outer stub axle shaft for Dana 44, '71-'79 Ford Bronco with a length of 9.72 inches and with 19 splines. These axles offer a strength increase over stock while retaining a low...More Details »
Item #: D620200
Condition:
New
Price: $124.32
Description: Dana 44 pinion gear standard Open.
Item #: YPKD44-PG-01
Condition:
New
Price: $49.89
Description: Dana 44, GM55P & 8.2" GM pinion gear Thrust washer.
Item #: YSPTW-011
Condition:
New
Price: $4.89
Description: Master Overhaul kit for Dana 44 reverse rotation differential, straight axle, not IFS. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit...More Details »
Item #: K D44-REV
Condition:
New
Price: $349.37
Description: Performance steel spool for Dana Spicer 44 with 30 spline axles. Fits 3.73 and down. These performance spools are made from the highest quality materials to ensure high strength and long life in...More Details »
Item #: YP FSD44-3-30DN
Condition:
New
Price: $340.89
Description: Dana 44 TracLoc 3.73 (excl. rear c-clip) complete 30 spline positraction.
Item #: DS 73613
Condition:
New
Price: $495.12
Description: Dana 44 TracLoc 3.92 (excl. rear c-clip) complete 30 spline positraction.
Item #: DS 73854
Condition:
New
Price: $379.70
Description: Dana 44 TracLoc cross pin retainer clip.
Item #: YSPXP-012
Condition:
New
Price: $8.84
Description: Dana 44 TracLoc spider gears, 30SP.
Item #: YPKD44-T/L-30
Condition:
New
Price: $883.89
Description: SL XP-D44 is made from forged 8320 high nickel moly steel and is recommended for use with the installation of the Spartan Locker and other lunch box style lockers. This can be used a replacement for the stock D44 cross pin as well.
Item #: SL XP-D44
Condition:
New
Please Call for Availability
Description: Dana 44 , Dana 60 , & 9.25" TracLoc CLUTCH CLIP / GUIDE
Note: these clips are included with TracLoc Clutch Kit Part# DS 706352
Item #: YSPCG-001
Condition:
New
Price: $6.89
Description: Dana 44-IFS TracLoc 3.73 complete 30 Spline positraction
Item #: DS 73613-IFS
Condition:
New
Price: $621.22
Description: Dana 44-IFS TracLoc 3.92 complete 30 Spline positraction
Item #: DS 73854-IFS
Condition:
New
Price: $413.53
No Image Available
Description: Dana 70-HD & 10.25" F carrier shims.
Item #: DS 706373
Condition:
New
Price: $95.16
No Image Available
Description: Dana U/Joint with zerk fitting. 2.375" snap ring span, 1.062" cap diameter. Inside snap ring.
Item #: DS U-1200
Condition:
New
Price: $31.70
Description: 7290 to 1350 adaptor U/joint, Large Chrysler to 1350.
Item #: DS U-3140
Condition:
New
Price: $109.26