- Home »
- Catalog
Complete Offroad » Ford, F-250
Products for:
- Make: Ford
- Model: F-250
View Universal items for: Ford F-250
Browse Products
Description: Replacement cover gasket. For Dana 44
Item #: FDHC-YCGD44
Condition:
New
Price: $12.89
NEW!
Description: Yukon Gear & Axle Mighty Seal for Front Dana 44, Fits 2.5" Shaft and 3.256" Outer Diameter
Item #: FDHC-YMS442380
Condition:
New
Price: $19.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-4-30
Condition:
New
Price: $966.89
Description: Yukon replacement outer stub axle shaft for Dana 44 IFS with a length of 9.8 inches and with 19 splines. Yukon front axles come with a one year warranty against manufacturing defects.
Item #: FDHC-YA D39906
Condition:
New
Price: $220.89
Description: Replacement pinion nut washer for Dana 44 JK, 60, 70U, '08 & newer Ford 10.5" & Nissan Titan rear.
Item #: FDHC-YSPPN-030
Condition:
New
Price: $6.89
Description: Dana 44 pinion gear standard Open.
Item #: FDHC-YPKD44-PG-01
Condition:
New
Price: $51.89
Description: Dana 44, GM55P & 8.2" GM pinion gear Thrust washer.
Item #: FDHC-YSPTW-011
Condition:
New
Price: $7.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD44-S-30
Condition:
New
Price: $208.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP FSD44-3-30DN
Condition:
New
Price: $369.89
NEW!
Description: 1310 U-bolts, 5/16" x 1-3/8" Dana 30, Dana 44, 8.2", 12P, 12T, VET, Model 20.
Item #: FDHC-YY UB-002
Condition:
New
Price: $29.89
Description: Replacement side gear thrust washer for Dana 44, Model 20, and Ford 8" & 9"
Item #: FDHC-YSPTW-013
Condition:
New
Price: $6.89
Description: Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225" DIA, for X/P shaft, 1.87" LNG.
Item #: FDHC-YSPXP-022
Condition:
New
Price: $10.89
Description: Dana 50, Fits all Gear Ratio Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD50-30-1
Condition:
New
Price: $759.89
Description: Replacement Spindle nut kit (two nuts and washer) for 1981 and newer Dana 50 and 60.
Item #: FDHC-AK D50F-NUTS-A
Condition:
New
Price: $49.89
Description: Dana 60 & Dana 61 TracLoc clutch set.
Item #: FDHC-YPKD60-PC-T/L
Condition:
New
Price: $264.89
Description: Dana 60 & Dana 70 Power Lok case bolt.
Item #: FDHC-YSPBLT-054
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).
Item #: FDHC-YPKD60-PC-P/L
Condition:
New
Price: $172.89
Description: Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Item #: FDHC-YSPXP-010
Condition:
New
Price: $162.89
NEW!
Description: Dana 60 4.10 & Down Yukon Dura Grip Positraction, Narrow, 30 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-3-30
Condition:
New
Price: $968.89
NEW!
Description: Dana 60 4.10 & Down Yukon Dura Grip Positraction, Narrow, 35 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-3-35
Condition:
New
Price: $968.89
NEW!
Description: Dana 60 4.56 & Up Yukon Dura Grip Positraction, Narrow, 30 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-4-30
Condition:
New
Price: $968.89
NEW!
Description: Dana 60 4.56 & Up Yukon Dura Grip Positraction, Narrow, 35 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-4-35
Condition:
New
Price: $985.89
Description: Dana 60 ABS exciter tone ring.
Item #: FDHC-YSPABS-010
Condition:
New
Price: $84.89
Description: Dana 60 Drive Flange Cap, Yukon Engraved
Item #: FDHC-YP DFC-LG-Y
Condition:
New
Price: $134.89
Description: Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75" Chrysler STD) Dana 70 2PC.
Item #: FDHC-YSPTW-017
Condition:
New
Price: $8.89
Description: 3/8" cover bolt, Dana 60, Dana 70 & Dana 80.
Item #: FDHC-YSPBLT-053
Condition:
New
Price: $7.89
Description: Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Item #: FDHC-YY STR-003
Condition:
New
Price: $28.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $19.89
Description: Dana 70 & Dana 80 pinion gear Thrust washer.
Item #: FDHC-YSPTW-018
Condition:
New
Price: $10.89
Description: Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Item #: FDHC-YSPXP-019
Condition:
New
Price: $62.89
NEW!
Description: Dana 80 3.73 & Down Yukon Dura Grip Positraction, 37 Spline, Antilock Brake System Compatible Limited Slip 4 Pinion Design
Item #: FDHC-YDGD80-3-37
Condition:
New
Price: $1,136.89
NEW!
Description: Dana 80 4.10 & Up Yukon Dura Grip Positraction, 37 Spline, Antilock Brake System Compatible Limited Slip 4 Pinion Design
Item #: FDHC-YDGD80-4-37
Condition:
New
Price: $1,177.89
Description: Dana 80 ABS exciter tone ring.
Item #: FDHC-YSPABS-008
Condition:
New
Price: $160.89
NEW!
Description: Pinion Preload Shim Kit for Dana 80
Item #: FDHC-SK 42429
Condition:
New
Price: $19.89
Description: Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).
Item #: FDHC-YPKD80-PC-T/L
Condition:
New
Price: $451.89
Description: Drive Flange Cap for Dana 44
Item #: FDHC-YP DFC-SM-B
Condition:
New
Price: $109.89
Description: Drive Flange Cap for Dana 44, Yukon Engraved
Item #: FDHC-YP DFC-SM-Y
Condition:
New
Price: $109.89
Description: Drive Flange Cap for Dana 60
Item #: FDHC-YP DFC-LG-B
Condition:
New
Price: $134.89
Description: Drive flange, 19 spline inner, 48 spline outer.
Item #: FDHC-YHCDF-19-A
Condition:
New
Price: $121.89
Description: Finned aluminum cover for Dana 80
Item #: FDHC-YP C5-D80-A
Condition:
New
Price: $212.89
Description: Finned aluminum cover for Ford 10.5", '08 & Up
Item #: FDHC-YP C5-F10.5
Condition:
New
Price: $155.89
Description: 10.25" & 10.5" cover gasket.
Item #: FDHC-YCGF10.25
Condition:
New
Price: $14.89
Description: Ford 10.25" C/clip.
Item #: FDHC-YSPCC-005
Condition:
New
Price: $23.89
Description: Ford 7.5" & 8.8" ring gear bolt, standard Open & TracLoc. 7/16" x 20.
Item #: FDHC-YSPBLT-024
Condition:
New
Price: $7.89
Description: 8.8" Reverse inner pinion bearing oil baffle.
Item #: FDHC-YSPBF-007
Condition:
New
Price: $13.89
Description: Ford 9.75" ring gear bolt. 12mm x 1.25.
Item #: FDHC-YSPBLT-015
Condition:
New
Price: $10.89
Description: Grease retainer for Dana 60 king-pin
Item #: FDHC-YP KP-009
Condition:
New
Price: $11.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-354
Condition:
New
Price: $680.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-373
Condition:
New
Price: $660.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60V-409
Condition:
New
Price: $1,033.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-411
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-430
Condition:
New
Price: $561.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-456
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-488
Condition:
New
Price: $492.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-513
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-538
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-586
Condition:
New
Price: $568.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-617
Condition:
New
Price: $558.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-717
Condition:
New
Price: $611.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.5-355-31
Condition:
New
Price: $427.89