- Home »
- Catalog
Complete Offroad » Chevrolet / Chevy, C30 1Ton (2WD)
Products for:
- Make: Chevrolet / Chevy
- Model: C30 1Ton (2WD)
View Universal items for: Chevrolet / Chevy C30 1Ton (2WD)
Browse Products
Description: Lube Locker cover gasket for Dana 60 & Dana 70
Item #: LLGD060
Condition:
New
Price: $29.30
Description: Lube Locker cover gasket for GM 10.5" 14 bolt truck
Item #: LLGG014
Condition:
New
Price: $29.30
Description: Cover bolt for GM 7.25, 7.6, 8.0, 8.6, 9.25, 9.5, 14T & 11.5
Item #: YSPBLT-082
Condition:
New
Price: $5.89
Description: Master Overhaul Kit for GM '88 and older 14T differential. This kit uses Timken Bearings and Races along with high quality seals and small parts. Included in this kit are carrier bearings and...More Details »
Item #: K GM14T-A
Condition:
New
Price: $337.78
Description: Outer oil slinger for Dana 60, 70, 70U & 70HD
Item #: YSPBF-020
Condition:
New
Price: $5.89
Description: Outer wheel bearing retaining snap ring for GM 14T.
Item #: YSPSR-014
Condition:
New
Price: $32.89
Description: Pilot bearing for 10.5" 14 bolt truck, 2.050" O.D.
Item #: YB PB-004
Condition:
New
Price: $43.89
Description: Pilot bearing for GM HO72, early deisgn
Item #: BCAMUB5205UM
Condition:
New
Price: $63.07
Description: Pilot bearing for HO72 differential
Item #: BCAM5205EL
Condition:
New
Price: $140.77
Description: Dana 70 & Dana 70-HD, Ford 10.25" & Ford 10.5" pinion depth shim kit.
Item #: SK 30797
Condition:
New
Price: $11.32
Description: 9.75" Ford PIN depth or HO72 (YG) pinion shim kit.
Item #: SK 20975
Condition:
New
Price: $18.74
Description: GM HO72 (Yukon gear ONLY ) pinion depth shims.
Item #: SK 20100
Condition:
New
Price: $26.35
Description: Pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16" nut, 7/8" x 14 thread.
Item #: YSPPN-010
Condition:
New
Price: $7.89
Description: Differential pinion race
Item #: TK HM803110
Condition:
New
Price: $25.60
Description: Pinion seal for GM 14T.Yukon Mighty seal.
Item #: YMS2286
Condition:
New
Price: $16.89
Description: Plug adapter for extra-large clamshell. No Return.
Item #: YT P14
Condition:
New
Price: $41.89
Description: Powr Lok 35 spline side gear for Dana 60 & 70
Item #: YPKD60-SG-01
Condition:
New
Price: $296.89
Description: Powr Lok drive clutch for Dana 60 & 70
Item #: YPKD60-PC-01
Condition:
New
Price: $18.89
Price: $6.61
Description: Replacement pinion seal for Dana 44HD, Dana 60 & Dana 70 .Yukon Mighty seal.
Item #: YMS9316
Condition:
New
Price: $25.89
Description: Ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2" x 18.
Item #: YSPBLT-007
Condition:
New
Price: $4.89
Description: Set-up bearing (one bearing). HM803149. No return.
Item #: YT SB-HM803149
Condition:
New
Price: $137.89
Description: M802048 set-up bearing (one bearing). No return.
Item #: YT SB-M802048
Condition:
New
Price: $137.89
Description: Side gear thrust washer for Dana 60, 70 & 80
Item #: YSPTW-073
Condition:
New
Price: $4.89
Description: Spindle nut for Dana 60 & 70, 1.940" I.D., with plastic ring. This replaces Spicer part number 39695.
Item #: YSPSP-013
Condition:
New
Price: $20.89
Description: Spindle nut for Dana 70, 1.940" I.D., 6 slots. This replaces Spicer part number 33732.
Item #: YSPSP-006
Condition:
New
Price: $31.89
Description: Spindle nut for GM 10.5" 14 bolt truck, 1.935" I.D., 6 holes
Item #: YSPSP-037
Condition:
New
Price: $68.89
Description: Spindle nut kit for Dana 30, Dana 44 & GM 8.5". Not CJ or Scout. This replaces Spicer part number 28068X.
Item #: YSPSP-002
Condition:
New
Price: $26.89
Description: Spindle nut retainer for Dana 60 & 70, 1.830" I.D., 10 outer tabs. This replaces Spicer part number 30637.
Item #: YSPSP-004
Condition:
New
Price: $9.89
Description: Spindle nut retainer, 2.030" I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Item #: YSPSP-007
Condition:
New
Price: $7.89
Description: Spindle nut washer for GM 10.5" 14 bolt truck, 2.160" I.D., 1 tab
Item #: YSPSP-038
Condition:
New
Price: $29.89
Description: Spindle nut, 2.065" I.D., six slots. This replaces Spicer part number 36635.
Item #: YSPSP-011
Condition:
New
Price: $24.89
Description: Standard Open cross pin shaft for four pinion design for GM 14T.
Item #: YSPXP-037
Condition:
New
Price: $91.89
Price: $118.89
Description: Steel cover for GM 10.5" 14 bolt truck
Item #: YP C5-GM14T
Condition:
New
Price: $69.89
Description: Timken axle bearing for GM 10.5" 14 bolt truck
Item #: TK 387AS
Condition:
New
Price: $31.45
Description: Timken axle race for GM 10.5" 14 bolt truck
Item #: TK 382A
Condition:
New
Price: $17.27
Description: MATES A 1330 (1 1/16" cap) YOKE TO A 1350 YOKE.
2)1.186" caps
2)1-1/16" caps
3.63" cap to cap
Item #: DS U-648
Condition:
New
Price: $83.68
Description: DANA SPICER
4)1.184" caps
3.63" cap to cap
Item #: DS U-178
Condition:
New
Price: $31.74
Description: U/joint strap bolt for 14T, 7.5", and 8.5" GM.
Item #: YSPBLT-074
Condition:
New
Price: $8.55
Description: U/joint strap for GM 14T. (One single strap)
Item #: YY STR-007
Condition:
New
Price: $7.89
Description: This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil...More Details »
Item #: ZBKGM14T-A
Condition:
New
Price: $241.13
Description:
Spider gear kit
Fits Dana Spicer 70, 35 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers
Item #: ZIKD70-S-35
Condition:
New
Price: $186.57
Description:
Spider gear kit
Fits GM 10.5" 14 bolt truck open differential
Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Item #: ZIKGM14T-S-30
Condition:
New
Price: $291.89
Description: USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion...More Details »
Item #: ZK D70-HD
Condition:
New
Price: $378.87
Description: USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion...More Details »
Item #: ZK GM14T-A
Condition:
New
Price: $246.63
Description: USA Standard replacement Ring & Pinion gear set for Dana 70 in a 3.54 ratio
Item #: ZG D70-354
Condition:
New
Price: $280.35
Description: USA Standard replacement Ring & Pinion gear set for Dana 70 in a 3.73 ratio
Item #: ZG D70-373
Condition:
New
Price: $289.45
Description: USA Standard replacement Ring & Pinion gear set for Dana 70 in a 4.11 ratio
Item #: ZG D70-411
Condition:
New
Price: $289.45
Description: USA Standard replacement Ring & Pinion gear set for Dana 70 in a 4.56 ratio
Item #: ZG D70-456
Condition:
New
Price: $289.45
Description: USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find...More Details »
Item #: ZG D70-456T
Condition:
New
Price: $331.57
Description: USA standard replacement ring & pinion gear set for Dana 70 in a 4.88 ratio
Item #: ZG D70-488
Condition:
New
Price: $289.45