- Home »
- Catalog
Complete Offroad » GMC, Yukon 1500 1/2 Ton
Products for:
- Make: GMC
- Model: Yukon 1500 1/2 Ton
View Universal items for: GMC Yukon 1500 1/2 Ton
Browse Products
Description: Ring gear bolt for GM 7.5", 7.6", 7.6" IRS, 8.0", 8.25" IFS, 8.5", 8.6" & 8.6" IRS. 7/16" x 20.
Item #: FDHC-YSPBLT-019
Condition:
New
Price: $7.89
Description: Side bearing adjuster lock for 8.25" GM IFS.
Item #: FDHC-YSPSA-009
Condition:
New
Price: $16.89
Description: Side gear thrust washer for 8.25" GM IFS.
Item #: FDHC-YSPTW-040
Condition:
New
Price: $16.89
Description: Standard open and Gov-Loc cross pin for 9.5" GM.
Item #: FDHC-YSPXP-034
Condition:
New
Price: $39.89
Description: Standard open side gear thrust washer for 9.5" GM.
Item #: FDHC-YSPTW-033
Condition:
New
Price: $13.89
Description: Standard open side gear thrust washer for 8.5" GM.
Item #: FDHC-YSPTW-034
Condition:
New
Price: $20.89
Description: Standard open spider gear set for '07 & up GM 8.6". This spider gear set fits casting number 8064.
Item #: FDHC-YPKGM8.6-S-30V3
Condition:
New
Price: $219.89
Description: Standard Open and Gov-Loc cross pin bolt with M10x1.5 thread for 9.5" and 9.25" GM IFS
Item #: FDHC-YSPBLT-063
Condition:
New
Price: $24.89
Description: Standard open cross pin (0.795" diameter) for 8.5" GM. fits some Eaton positractions.
Item #: FDHC-YSPXP-033
Condition:
New
Price: $41.89
Description: Steel cover for GM 8.2", 8.5", & 8.6" rear. Threaded for fill plug. Plug and Gasket are included.
Item #: FDHC-YP C5-GM8.5
Condition:
New
Price: $73.89
Description: Steel cover for GM 9.5" Threaded for fill plug, fill plug not included.
Item #: FDHC-YP C5-GM9.5
Condition:
New
Price: $73.89
Description: Stub axle retaining clip snap ring for 8.25" GM IFS.
Item #: FDHC-YSPSR-013
Condition:
New
Price: $17.89
Description: Stub axle side seal for '98 and older GM 8.25" IFS. Two needed. Yukon Mighty seal.
Item #: FDHC-YMS710101
Condition:
New
Price: $25.89
Description: Super Carrier Shim kit for Ford 7.5", GM 7.5", 8.2" & 8.5"
Item #: FDHC-SK SS10
Condition:
New
Price: $47.89
Description: Super Carrier Shim kit for Ford 8.8", GM 12 bolt car & truck, 8.6 & Vette
Item #: FDHC-SK SS12
Condition:
New
Price: $47.89
Description: 9.5" GM differential carrier Supershim kit.
Item #: FDHC-SK SSGM9.5
Condition:
New
Price: $27.89
Description: U/joint strap bolt for 14T, 7.5", and 8.5" GM.
Item #: FDHC-YSPBLT-074
Condition:
New
Price: $15.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLGM8.5-3-30
Condition:
New
Price: $1,133.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM9.5-373-12B
Condition:
New
Price: $667.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM9.5-410-12B
Condition:
New
Price: $667.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM9.5-456-12B
Condition:
New
Price: $667.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM9.5-488-12B
Condition:
New
Price: $667.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM9.76-323
Condition:
New
Price: $697.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM9.5-B
Condition:
New
Price: $553.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.6-B
Condition:
New
Price: $373.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM9.5-12B
Condition:
New
Price: $556.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM9.76
Condition:
New
Price: $625.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM9.5-A
Condition:
New
Price: $526.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.25IFS-A
Condition:
New
Price: $447.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.25IFS-B
Condition:
New
Price: $447.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.6-A
Condition:
New
Price: $340.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM9.76-CONV
Condition:
New
Price: $634.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.5-HD
Condition:
New
Price: $338.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.5
Condition:
New
Price: $259.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM9.5-12B
Condition:
New
Price: $177.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM9.76
Condition:
New
Price: $171.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM8.25IFS-A
Condition:
New
Price: $53.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM8.5
Condition:
New
Price: $47.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM8.6
Condition:
New
Price: $89.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM9.5-A
Condition:
New
Price: $142.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM9.5-B
Condition:
New
Price: $177.89
Description: Yukon Performance 1-3/4" deck steel spool for 8.5" GM with 33 spline axles. Uses 1.785 journals. Yukon performance spools are made from the highest quality materials to ensure high strength and...More Details »
Item #: FDHC-YP FSGM8.5-33
Condition:
New
Price: $437.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM8.6-A
Condition:
New
Price: $172.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM8.6-B
Condition:
New
Price: $204.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM9.5-A
Condition:
New
Price: $341.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM9.5-B
Condition:
New
Price: $341.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM9.5-12B
Condition:
New
Price: $341.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM9.76
Condition:
New
Price: $341.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM8.25IFS-A
Condition:
New
Price: $245.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM8.5
Condition:
New
Price: $178.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM9.76-CONV
Condition:
New
Price: $341.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $164.89
Description: Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set.
Item #: FDHC-YPKGM8.5-P-30
Condition:
New
Price: $355.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKGM9.5-P-33
Condition:
New
Price: $659.89
Description: Yukon Positraction shim kit (12 shims) for GM 8.2", GM 8.5"/ 8.6", 12T, 12P, Ford 8.8" & Cast Iron 'Vette
Item #: FDHC-YPKGM12-PC-SHIM
Condition:
New
Price: $42.89
Description: Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design,...More Details »
Item #: FDHC-YG GM8.5-373
Condition:
New
Price: $459.89
Description: Adjusts the threaded side adjusters for setting backlash and carrier bearing preload. No return.
Item #: FDHC-YT A08
Condition:
New
Price: $172.89
Description: Yukon spider gear set for GM 9.5" Dura Grip Posi. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.
Item #: FDHC-YPKGM9.5-P-33-DG
Condition:
New
Price: $587.89
Description: Yukon standard open carrier case for '00-'06 GM 8.6", V2 - version 2 design.
Item #: FDHC-YC G40007876V2
Condition:
New
Price: $300.89
Description: Yukon standard open carrier case for GM 8.25" IFS, 3.23 & down
Item #: FDHC-YC G15919119
Condition:
New
Please Call for Availability