- Home »
- Catalog
Complete Offroad » GMC, C25/ C2500 3/4 Ton (2WD)
Products for:
- Make: GMC
- Model: C25/ C2500 3/4 Ton (2WD)
View Universal items for: GMC C25/ C2500 3/4 Ton (2WD)
Browse Products
Description: 20 long air line for Zip Locker.
Item #: FDHC-YZLAL-01
Condition:
New
Please Call for Availability
Description: 7.5" and 8.5" GM rear U/joint strap, Mech 3R.
Item #: FDHC-YY STR-008
Condition:
New
Price: $27.89
Description: 8.2" & 8.5" rear cover gasket.
Item #: FDHC-YCGGM8.5
Condition:
New
Price: $13.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2" & 8.5" differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK GM8.5
Condition:
New
Please Call for Availability
Description: Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains.
Item #: FDHC-YDGGM8.5-3-30-1
Condition:
New
Price: $826.89
Description: 8.5" & 8.6" GM standard Open pinion gear Thrust washer. also fits 8.5" Eaton with 0.795" cross pin.
Item #: FDHC-YSPTW-047
Condition:
New
Please Call for Availability
Description: 8.5" GM EXTRA HD standard Open case (uses larger bearings).
Item #: FDHC-YC G26010481-XHD
Condition:
New
Price: $270.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. This kit contains carrier bearings, races & shims.
Item #: FDHC-CK GM8.6
Condition:
New
Please Call for Availability
Description: 8.6" GM wheel speed reluctor ring fits behind the axle bearing & seal.
Item #: FDHC-YSPABS-021
Condition:
New
Price: $99.89
Description: 8.6" GM standard Open side gear Thrust washer.
Item #: FDHC-YSPTW-048
Condition:
New
Price: $7.89
Description: 9.5 Standard Open Pinion gear Thrust Washer.
Item #: FDHC-YSPTW-036
Condition:
New
Price: $27.89
Description: 9.5" GM cover gasket.
Item #: FDHC-YCGGM9.5
Condition:
New
Price: $14.89
Description: Air line repair kit, ZIP locker.
Item #: FDHC-YZLAL-KIT
Condition:
New
Please Call for Availability
Description: Aluminum Girdle cover for 8.2" and 8.5" GM TA HD.
Item #: FDHC-YP C3-GM8.5-R
Condition:
New
Price: $408.89
Description: Axle seal for 9.5" GM. Yukon Mighty seal.
Item #: FDHC-YMS3747
Condition:
New
Price: $21.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D60
Condition:
New
Price: $186.89
Description: Chrome cover for GM 14T.
Item #: FDHC-YP C1-GM14T
Condition:
New
Price: $64.89
Description: Chrome cover for 8.6", 8.5" and 8.2" GM rear.
Item #: FDHC-YP C1-GM8.5-R
Condition:
New
Price: $63.89
Description: Chrome cover for 9.5" GM. Not threaded for fill plug
Item #: FDHC-YP C1-GM9.5
Condition:
New
Price: $67.89
Description: Chrome Moly cross pin shaft for Mini-Spool for 8.5" GM HD.
Item #: FDHC-YP MINSXGM8.5
Condition:
New
Price: $55.89
Description: Dana 44, Dana 60, & 9.25" TracLoc clutch clip / guide
Item #: FDHC-YSPCG-001
Condition:
New
Price: $9.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft for GM 9.5", fits standard & Yukon Dura Grip or Eaton Posi carrier.
Item #: FDHC-YSPXPGM9.5
Condition:
New
Please Call for Availability
Description: Crush Sleeve for Chrysler 9.25" front, GM 8.6" IRS, 9.25" IFS & 9.5". Approx. 0.640" long.
Item #: FDHC-YSPCS-016
Condition:
New
Price: $8.89
Description: Crush sleeve eliminator kit for GM 10.5" 14 bolt truck. This kit contains a solid spacer & shim kit to eliminate the crush sleeve and set pinion bearing preload.
Item #: FDHC-SK CSGM14T
Condition:
New
Price: $104.89
Description: Crush sleeve eliminator kit for GM 8.5" & Chrysler 9.25"
Item #: FDHC-SK CSGM8.5
Condition:
New
Price: $50.89
Description: Replacement Crush Sleeve for GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan M226 rear. Approx. 0.620" long.
Item #: FDHC-YSPCS-014
Condition:
New
Price: $8.89
Description: Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the best in heat-treating...More Details »
Item #: FDHC-YA GM14T-30-42
Condition:
New
Price: $280.89
Description: Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the best in heat-treating...More Details »
Item #: FDHC-YA GM14T-30-35
Condition:
New
Please Call for Availability
Description: 5/16"-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5", 7.625", 8.2", 8.5", 12 bolt passenger car and truck.
Item #: FDHC-YSPBLT-075
Condition:
New
Price: $6.89
Description: Replacement pinion nut washer for Dana 44 JK, 60, 70U, '08 & newer Ford 10.5" & Nissan Titan rear.
Item #: FDHC-YSPPN-030
Condition:
New
Price: $6.89
Description: Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225" DIA, for X/P shaft, 1.87" LNG.
Item #: FDHC-YSPXP-022
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 61 TracLoc clutch set.
Item #: FDHC-YPKD60-PC-T/L
Condition:
New
Price: $264.89
Description: Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).
Item #: FDHC-YPKD60-PC-P/L
Condition:
New
Price: $172.89
Description: Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Item #: FDHC-YSPXP-010
Condition:
New
Price: $162.89
Description: Dana 60 ABS exciter tone ring.
Item #: FDHC-YSPABS-010
Condition:
New
Price: $84.89
Description: Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75" Chrysler STD) Dana 70 2PC.
Item #: FDHC-YSPTW-017
Condition:
New
Price: $8.89
Description: 3/8" cover bolt, Dana 60, Dana 70 & Dana 80.
Item #: FDHC-YSPBLT-053
Condition:
New
Price: $7.89
Description: Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Item #: FDHC-YY STR-003
Condition:
New
Price: $28.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $19.89
Description: Eaton Positraction shim kit for GM 14T.
Item #: FDHC-YPKGM14T-PC-SHI
Condition:
New
Please Call for Availability
Description: Eaton Positraction shim kit for 9.5" GM.
Item #: FDHC-YPKGM9.5-PC-SHI
Condition:
New
Please Call for Availability
Description: Eaton-type 14 plate Carbon clutch set for 9.5" GM and 9.75" Ford.
Item #: FDHC-YPKGM9.5-PC-14
Condition:
New
Please Call for Availability
Description: Eaton-type Positraction Carbon clutch kit with 14 plates for GM 14T and 10.5"
Item #: FDHC-YPKGM14T-PC-14
Condition:
New
Please Call for Availability
Description: Full-floating axle seal for GM 14T.Yukon Mighty seal.
Item #: FDHC-YMS2081
Condition:
New
Price: $10.89
Description: 14T cover gasket.
Item #: FDHC-YCGGM14T
Condition:
New
Price: $14.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades.
Item #: FDHC-CK GM9.5
Condition:
New
Please Call for Availability
Description: GM 9.5" ring gear bolt. 12mm x 1.5.
Item #: FDHC-YSPBLT-017
Condition:
New
Price: $13.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-354
Condition:
New
Price: $680.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-373
Condition:
New
Price: $660.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60V-409
Condition:
New
Price: $1,033.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-411
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-430
Condition:
New
Price: $561.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-456
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-488
Condition:
New
Price: $492.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-513
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-538
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-586
Condition:
New
Price: $568.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-617
Condition:
New
Price: $558.89