- Home »
- Catalog
Complete Offroad » Toyota
Products for:
- Make: Toyota
View Universal items for: Toyota
Browse Products
Description: Fits '03 and up 4Runner and '07-'14 FJ Cruiser. 6 x 5.5" bolt pattern, 30 spline, 31.2" long.
Item #: FDHC-YA WT60240
Condition:
New
Price: $452.89
Description:
Compact design
12 volt
For air operated locker operation only
Item #: FDHC-YZLCOMPRESSOR-01
Condition:
New
Please Call for Availability
Description: Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more
Item #: FDHC-YSPCS-065
Condition:
New
Price: $32.89
Description: Yukon Gear & Axle CV Axle Carrier Bushing for Toyota 8", Front with Clamshell Design
Item #: FDHC-YB AX-018
Condition:
New
Price: $95.89
Description: Yukon Gear & Axle CV Axle Needle Bearing for Toyota 8", Front with Clamshell Design
Item #: FDHC-YB AX-017
Condition:
New
Price: $36.89
Description: Help keep Positraction chatter down with Yukon's popular friction modifier (Posi additive) for limited slip differentials with composite clutches like the Yukon Dura Grip.
Item #: FDHC-OILADD
Condition:
New
Price: $20.89
Description: 07 & up Tundra & Sequoia front ring gear bolt..
Item #: FDHC-YSPBLT-042
Condition:
New
Price: $8.89
Description: 07 and up Tundra 10.5" rear pinion seal W/ 5.7L.Yukon Mighty seal.
Item #: FDHC-YMST1019
Condition:
New
Price: $82.89
Description: 07 and up Tundra 9.5" rear pinion seal W/ 4.0L & 4.7L.Yukon Mighty seal.
Item #: FDHC-YMST1018
Condition:
New
Price: $75.89
Description: 07 and up Tundra front outer slinger.
Item #: FDHC-YSPBF-028
Condition:
New
Price: $33.89
Description: 07 and up Tundra front pinion nut.
Item #: FDHC-YSPPN-025
Condition:
New
Price: $15.89
Description: 07 and up Tundra front pinion seal. Yukon Mighty seal.
Item #: FDHC-YMST1008
Condition:
New
Price: $159.89
Description: 07 and up Tundra rear 10.5" cross pin shaft W/5.7L.
Item #: FDHC-YSPXP-047
Condition:
New
Price: $146.89
Description: 07 and up Tundra rear 10.5" pinion gear Thrust washer W/5.7L.
Item #: FDHC-YSPTW-059
Condition:
New
Price: $18.89
Description: 07 and up Tundra rear 10.5" ring gear bolt W/ 5.7L.
Item #: FDHC-YSPBLT-036
Condition:
New
Price: $7.89
Description: 07 and up Tundra rear 9.5" cross pin shaft W/ 4.0L & 4.7L.
Item #: FDHC-YSPXP-046
Condition:
New
Price: $156.89
Description: 07 and up Tundra rear 9.5" crush sleeve W/ 4.0L & 4.7L.
Item #: FDHC-YSPCS-051
Condition:
New
Price: $41.89
Description: 07 and up Tundra rear 9.5" pinion gear Thrust washer W/4.0L & 4.7L.
Item #: FDHC-YSPTW-060
Condition:
New
Price: $15.89
Description: 07 and up Tundra rear 9.5" ring gear bolts W/ 4.0L & 4.7L.
Item #: FDHC-YSPBLT-035
Condition:
New
Price: $11.89
Description: 1177, 7.5", 8", V6 Toyota REDI sleeve, saver for seal surface. Yukon Mighty seal.
Item #: FDHC-YMS99147
Condition:
New
Price: $91.89
Description: 20 long air line for Zip Locker.
Item #: FDHC-YZLAL-01
Condition:
New
Price: $31.89
Description: 2007-CURRENT Toyota Tundra front crush sleeve. Approx. 1.200" long.
Item #: FDHC-YSPCS-040
Condition:
New
Price: $19.89
Description: 3 quarts of Phillips 76 80W90 conventional gear oil with bottle of Posi additive (limited slip friction modifier).
Item #: FDHC-OK 3-QRT-CONV-A
Condition:
New
Please Call for Availability
Description: 3 quarts of 80W90 Phillips 76 conventional gear oil.
Item #: FDHC-OK 3-QRT-CONV
Condition:
New
Please Call for Availability
Description: 7.5" IFS axle side seal. Yukon Mighty seal.
Item #: FDHC-YMST1003
Condition:
New
Price: $11.89
Description: 7.5" Reverse Tacoma & Tundra left hand stub axle side seal. Yukon Mighty seal.
Item #: FDHC-YMST1014
Condition:
New
Price: $26.89
Description: 7.5" Reverse Tacoma & Tundra Right hand stub axle side seal. Yukon Mighty seal.
Item #: FDHC-YMST1013
Condition:
New
Price: $22.89
Description: Crush Sleeve Eliminator Kit for Toyota 7.5", Solid Preload Space Kit
Item #: FDHC-SK CST7.5
Condition:
New
Price: $71.89
Description: Yukon Gear & Axle CV Axle Carrier Bushing for Reverse 7.5" Toyota, Front without Manual Hubs
Item #: FDHC-YB AX-019
Condition:
New
Price: $93.89
Description: 7.5", 8", & V6 rear axle bearing snap ring / retainer clip
Item #: FDHC-YSPSR-017
Condition:
New
Price: $7.89
Description: 8" cross pin shaft, standard Open
Item #: FDHC-YSPXP-045
Condition:
New
Price: $42.89
Description: 8" IFS clamshell carrier, 3.91 and up, 07 & up FJ, 05 & up TAC/T100/TNDRA.
Item #: FDHC-YC TLCF-CS-4
Condition:
New
Price: $1,015.89
Description: Crush Sleeve Eliminator Solid Spacer Kit for Toyota 8" Clamshell Front
Item #: FDHC-SK CST8S-CS
Condition:
New
Price: $75.89
Description: 8" Reverse high-pinion Toyota Drop Out (fits 8" Housing) .
Item #: FDHC-YP DOTLC-REV
Condition:
New
Price: $569.89
Description: 8" roll pin, solid
Item #: FDHC-YSPXP-044
Condition:
New
Price: $14.89
Description: 8" standard Open pinion gear Thrust washer.
Item #: FDHC-YSPTW-054
Condition:
New
Price: $11.89
Description: 8" standard Open side gear Thrust washer.
Item #: FDHC-YSPTW-057
Condition:
New
Price: $16.89
Description: 8" Toyota dropout case, all new, includes adjusters.
Item #: FDHC-YP DOT8
Condition:
New
Price: $369.89
Description: 8" Toyota Yukon Dura Grip Limited Slip, 4 Pinion, 30 Spline Positraction Composite Clutches 4 Pinion Design
Item #: FDHC-YDGT8-30-1
Condition:
New
Price: $934.89
Description: 8" Toyota V6 Yukon Dura Grip Limited Slip, 4 Pinion, 30 Spline Positraction Composite Clutches 4 Pinion Design
Item #: FDHC-YDGTV6-30-1
Condition:
New
Price: $888.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK T8.2
Condition:
New
Price: $132.89
Description: Yukon Gear & Axle Toyota 8.2"Rear Crush Sleeve, 2010+ Toyota FJ Cruiser and 4Runner
Item #: FDHC-YSPCS-059
Condition:
New
Price: $25.89
Description: Yukon Gear & Axle Ring Gear Bolt for 8.2" Toyota
Item #: FDHC-YSPBLT-084
Condition:
New
Price: $11.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T8-C
Condition:
New
Price: $320.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T8-D
Condition:
New
Price: $320.89
Description: Air line repair kit, ZIP locker.
Item #: FDHC-YZLAL-KIT
Condition:
New
Price: $53.89
Description: 7.5" V6 & 4cyl side shim kit (incl. 7 shims).
Item #: FDHC-SK CCT7.5-SIDE
Condition:
New
Price: $108.89
Description: Conversion flange kit for Tundra 9.5" rear with aftermarket 29 spline pinion. Includes yoke, drive shaft flange, pinion seal, pinion nut & u/joint.
Item #: FDHC-YY T41204-29-KIT
Condition:
New
Price: $303.89
Description: Crush Sleeve for GM 55-62 car & truck and Toyota 8". 2.510" long.
Item #: FDHC-YSPCS-018
Condition:
New
Price: $16.89
Description: 8" Toyota solid crush sleeve replacement spacer kit, preload.
Item #: FDHC-SK CST8
Condition:
New
Price: $76.89
Description: V6 Toyota solid crush sleeve replacement spacer kit, preload.
Item #: FDHC-SK CSTV6
Condition:
New
Price: $76.89
Description: Crush Sleeve Eliminator Solid Spacer Kit for Toyota 8.75" Rear
Item #: FDHC-SK CST8.75
Condition:
New
Price: $71.89
Description: Crush Sleeve for Toyota V6, Landcruiser reverse front & Tacoma/T100 with factory locker, 1.820" long.
Item #: FDHC-YSPCS-035
Condition:
New
Price: $18.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-571-29
Condition:
New
Price: $448.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5-488
Condition:
New
Price: $454.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5-529
Condition:
New
Price: $429.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5-571
Condition:
New
Price: $471.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-390K
Condition:
New
Price: $474.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-411-29
Condition:
New
Price: $448.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-411K
Condition:
New
Price: $474.89