- Home »
- Catalog
Complete Offroad » Tacoma
Products for:
- Model: Tacoma
View Universal items for: Tacoma
Browse Products
Description: Toyota 29spl V6 and clamshell front, outer oil slinger.
Item #: FDHC-YSPBF-027
Condition:
New
Price: $21.89
Description: Outside axle seal for 7.5", 8" and V6 Toyota rear. Yukon Mighty seal.
Item #: FDHC-YMS1956
Condition:
New
Price: $33.89
Description: Outer oil slinger for Toyota 7.5", 8", V6 & Landcruiser.
Item #: FDHC-YSPBF-026
Condition:
New
Price: $12.89
Description: Pinion flange dust shield for Toyota 8" clamshell front
Item #: FDHC-YSPBF-040
Condition:
New
Price: $28.89
Description: Pinion nut for Suzuki Samurai, Toyota 8", V6, Landcruiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.
Item #: FDHC-YSPPN-022
Condition:
New
Price: $8.89
Description: Pinion preload shim for Toyota T100. One single shim. 0.033" thick. Two needed. Fits against crush sleeve.
Item #: FDHC-SK T100-CS
Condition:
New
Price: $25.89
Description: Pinion seal for 7.5", 8", V6, and T100 and Tacoma with lockers. Yukon Mighty seal.
Item #: FDHC-YMS1177
Condition:
New
Price: $21.89
Description: Pump up kit, Zip Locker.
Item #: FDHC-YZLPUK
Condition:
New
Price: $170.89
Description: Rear wheel seal for 2000-2004 Tacoma, 2000-2006 Tundra & 2001-2002 4 Runner
Item #: FDHC-YMS710574
Condition:
New
Price: $36.89
Description: Replacement Pinion depth shims for Dana 60, 61 & D70-U
Item #: FDHC-SK 30291
Condition:
New
Price: $17.89
Description: Ring Gear bolt for Toyota 7.5", 8", V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.
Item #: FDHC-YSPBLT-031
Condition:
New
Price: $6.89
Description: Ring Gear bolt for Toyota T100, Tacoma & 8" IFS front. 12mm x 1.0.
Item #: FDHC-YSPBLT-030
Condition:
New
Price: $11.89
Description: Seal housing for Toyota ZIP locker, with O-rings
Item #: FDHC-YZLASH-01
Condition:
New
Price: $77.89
Description: T100 & Tacoma roll pin
Item #: FDHC-YSPXP-052
Condition:
New
Price: $11.89
Description: T100 & Tacoma standard cross pin shaft
Item #: FDHC-YSPXP-049
Condition:
New
Price: $78.89
Description: T100 & Tacoma standard pinion gear Thrust washer
Item #: FDHC-YSPTW-058
Condition:
New
Price: $26.89
Description: T100 & Tacoma standard side gear Thrust washer 1.60MM
Item #: FDHC-YSPTW-061
Condition:
New
Price: $21.89
Description: T100 & Tacoma w/LOC pinion nut.
Item #: FDHC-YSPPN-023
Condition:
New
Price: $11.89
Description: T8, TV6 T100 rear ABS ring.
Item #: FDHC-YSPABS-024
Condition:
New
Price: $205.89
Description: Tacoma (w/out factory locker) & T100 (w/out factory locker) pinion seal. Yukon Mighty seal.
Item #: FDHC-YMST1007
Condition:
New
Price: $21.89
Description: Toyota 7.5 pinion nut (M18x1.5).
Item #: FDHC-YSPPN-021
Condition:
New
Price: $10.89
Description: Toyota 7.5" crush sleeve, 2.185" long.
Item #: FDHC-YSPCS-032
Condition:
New
Price: $18.89
Description: Toyota 7.5", 8", & V6 ring gear bolt retainer plate (5 needed).
Item #: FDHC-YSPBLT-032
Condition:
New
Price: $7.89
Description: Toyota 8" & V6 gasket.
Item #: FDHC-YCGT8
Condition:
New
Price: $12.89
Description: Toyota clamshell design crush sleeve. Approx. 1.475" long.
Item #: FDHC-YSPCS-038
Condition:
New
Price: $13.89
Description: Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.
Item #: FDHC-YSPPN-024
Condition:
New
Price: $16.89
Description: Toyota T100 & Tacoma crush sleeve. Approx. 2.325" long.
Item #: FDHC-YSPCS-037
Condition:
New
Price: $19.89
Description: Toyota T100 & Tacoma pinion nut.
Item #: FDHC-YSPPN-026
Condition:
New
Price: $17.89
Description: Toyota V6 cross pin shaft
Item #: FDHC-YSPXP-048
Condition:
New
Price: $289.89
Description: Toyota V6, T100 pinion seal w/factory elec. locker & factory yoke (OE replacement ONLY).Yukon Mighty seal.
Item #: FDHC-YMST1012
Condition:
New
Price: $84.89
Description: V6 side gear Thrust washer.
Item #: FDHC-YSPTW-053
Condition:
New
Price: $25.89
Description: V6 standard Open pinion gear Thrust washer.
Item #: FDHC-YSPTW-055
Condition:
New
Price: $13.89
Description: ZIP locker rear switch cover.
Item #: FDHC-YZLASC-R
Condition:
New
Price: $9.89
Description: Zip Locker solenoid valve.
Item #: FDHC-YZLASV-01
Condition:
New
Price: $92.89
Description: ZIP locker switch.
Item #: FDHC-YZLASW-01
Condition:
New
Price: $15.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLTV6-30
Condition:
New
Price: $888.89
Description: TOYOTA 8.75" 4.88 REAR Ring & Pinion , 2016 + TACOMA .
Item #: FDHC-YG T8.75-488
Condition:
New
Price: $549.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TLCF-456R-CS-T
Condition:
New
Price: $508.89
Description: Toyota 8" Reverse Front 4.56 Ring & Pinion (CLAMSHL Design ONLY- fits3.91 & UP carrier) .
Item #: FDHC-YG TLCF-456R-CS
Condition:
New
Price: $480.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T100-390
Condition:
New
Price: $379.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK TV6-SPC
Condition:
New
Price: $468.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK TLC-REV-B
Condition:
New
Price: $599.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK TACOMA-LOC
Condition:
New
Price: $614.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T7.5-REV
Condition:
New
Price: $409.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T7.5-REV-FULL
Condition:
New
Price: $409.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T7.5-4CYL
Condition:
New
Price: $336.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T100
Condition:
New
Price: $480.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK TV6
Condition:
New
Price: $485.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK TV6-B
Condition:
New
Price: $485.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK TLC-REV-B
Condition:
New
Limited Supply: Only 5 Left!
Price: $122.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK T7.5-4CYL
Condition:
New
Price: $62.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK T100
Condition:
New
Price: $136.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK TV6
Condition:
New
Price: $65.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK TV6-B
Condition:
New
Price: $65.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK TV6-B
Condition:
New
Price: $279.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK T7.5-4CYL
Condition:
New
Price: $306.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK TLC-REV-B
Condition:
New
Limited Supply: Only 6 Left!
Price: $339.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK T100
Condition:
New
Price: $401.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK TV6
Condition:
New
Price: $326.89
Description: Yukon positraction internals for Toyota T100, Tacoma, Tundra, and Sequoia with 30 spline axles. This spider gaer kit fits Eatontractions ONLY. Yukon uses higher quality materials and better...More Details »
Item #: FDHC-YPKT100-P-30
Condition:
New
Please Call for Availability