- Home »
- Catalog
Complete Offroad » Trailblazer
Products for:
- Model: Trailblazer
View Universal items for: Trailblazer
Browse Products
Description: 18 plate steel clutches for GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette
Item #: FDHC-YPKGM12-PC-18
Condition:
New
Price: $493.89
Description: 3 quarts of Phillips 76 80W90 conventional gear oil with bottle of Posi additive (limited slip friction modifier).
Item #: FDHC-OK 3-QRT-CONV-A
Condition:
New
Price: $49.89
Description: 3 quarts of 80W90 Phillips 76 conventional gear oil.
Item #: FDHC-OK 3-QRT-CONV
Condition:
New
Price: $39.89
Description: 7.2" 97-03 inner side seal. Yukon Mighty seal.
Item #: FDHC-YMSG1004
Condition:
New
Price: $32.89
Description: 7.2" shifter seal. Yukon Mighty seal.
Item #: FDHC-YMSG1014
Condition:
New
Price: $26.89
Description: 7.2IFS GM 01 & up Envoy disconnect housing seal.
Item #: FDHC-YMSG1026
Condition:
New
Price: $40.89
Description: 7.2IFS GM Standard Open loaded case 3.23 & up.
Item #: FDHC-YC G46002013
Condition:
New
Price: $449.89
Description: 8.2" & 8.5" rear cover gasket.
Item #: FDHC-YCGGM8.5
Condition:
New
Price: $13.89
Description: Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains.
Item #: FDHC-YDGGM8.5-3-30-1
Condition:
New
Price: $826.89
Description: 8.5" & 8.6" GM standard Open pinion gear Thrust washer. also fits 8.5" Eaton with 0.795" cross pin.
Item #: FDHC-YSPTW-047
Condition:
New
Price: $13.89
Description: Yukon Axle ABS Tone Ring for 8.6" and 9.5" GM, with 55 Tooth Count
Item #: FDHC-YSPABS-034
Condition:
New
Price: $100.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. This kit contains carrier bearings, races & shims.
Item #: FDHC-CK GM8.6
Condition:
New
Price: $115.89
Description: Yukon Gear & Axle 8.6" GM, 3.42 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 30 Spline Yukon Dura Grip Limited Slip Positraction, and Axle Bearings & Seals
Item #: FDHC-YGK2026
Condition:
New
Price: $1,599.89
Description: Yukon Gear & Axle 8.6" GM, 3.42 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with Axle Bearings & Seals
Item #: FDHC-YGK2031
Condition:
New
Price: $855.89
Description: Yukon Gear & Axle 8.6" GM, 3.73 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 30 Spline Yukon Dura Grip Limited Slip Positraction, and Axle Bearings & Seals
Item #: FDHC-YGK2027
Condition:
New
Price: $1,599.89
Description: Yukon Gear & Axle 8.6" GM, 3.73 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with Axle Bearings & Seals
Item #: FDHC-YGK2032
Condition:
New
Price: $826.89
Description: Yukon Gear & Axle 8.6" GM, 4.11 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 30 Spline Yukon Dura Grip Limited Slip Positraction, and Axle Bearings & Seals
Item #: FDHC-YGK2028
Condition:
New
Price: $1,599.89
Description: Yukon Gear & Axle 8.6" GM, 4.11 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with Axle Bearings & Seals
Item #: FDHC-YGK2033
Condition:
New
Price: $892.89
Description: Yukon Gear & Axle 8.6" GM, 4.56 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 30 Spline Yukon Dura Grip Limited Slip Positraction, and Axle Bearings & Seals
Item #: FDHC-YGK2029
Condition:
New
Price: $1,599.89
Description: Yukon Gear & Axle 8.6" GM, 4.56 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with Axle Bearings & Seals
Item #: FDHC-YGK2034
Condition:
New
Price: $855.89
Description: Yukon Gear & Axle 8.6" GM, 4.88 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 30 Spline Yukon Dura Grip Limited Slip Positraction, and Axle Bearings & Seals
Item #: FDHC-YGK2030
Condition:
New
Price: $1,599.89
Description: Yukon Gear & Axle 8.6" GM, 4.88 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with Axle Bearings & Seals
Item #: FDHC-YGK2035
Condition:
New
Price: $855.89
Description: 8.6" GM wheel speed reluctor ring fits behind the axle bearing & seal.
Item #: FDHC-YSPABS-021
Condition:
New
Price: $99.89
Description: 8.6" GM standard Open side gear Thrust washer.
Item #: FDHC-YSPTW-048
Condition:
New
Price: $7.89
Description: Adapter sleeve for GM 7.2", 7.625" & 8.0" yokes to use triple lip pinion seal
Item #: FDHC-YY GM40006690
Condition:
New
Price: $24.89
Description: Adapter sleeve for GM 8.6" & 9.5" yokes to use triple lip pinion seal
Item #: FDHC-YY GM26060975
Condition:
New
Price: $19.89
Description: Adjuster lock bolt for left hand case half of 7.2" and 9.25" GM IFS.
Item #: FDHC-YSPBLT-062
Condition:
New
Price: $19.89
Description: Aluminum Girdle cover for 8.2" and 8.5" GM TA HD.
Item #: FDHC-YP C3-GM8.5-R
Condition:
New
Price: $408.89
Description: Axle seal for '88 and newer GM 8.5" Chevy C10.Yukon Mighty seal.
Item #: FDHC-YMS4762N
Condition:
New
Price: $14.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: C/clip for GM 7.5", 7.6" & 8"
Item #: FDHC-YSPCC-009
Condition:
New
Price: $17.89
Description: Chrome cover for 8.6", 8.5" and 8.2" GM rear.
Item #: FDHC-YP C1-GM8.5-R
Condition:
New
Price: $63.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft for 7.2" GM.
Item #: FDHC-YSPXP-035
Condition:
New
Price: $52.89
Description: Cross pin shaft for 7.5", 7.625", and 8" GM.
Item #: FDHC-YSPXP-036
Condition:
New
Price: $48.89
Description: Crush sleeve eliminator kit for GM 8.5" & Chrysler 9.25"
Item #: FDHC-SK CSGM8.5
Condition:
New
Price: $50.89
Description: Crush sleeve for Dana 44 JK rear, 8" GM & 8.25" IFS. Approx. 0.625" long.
Item #: FDHC-YSPCS-026
Condition:
New
Price: $12.89
Description: Replacement Crush Sleeve for GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan M226 rear. Approx. 0.620" long.
Item #: FDHC-YSPCS-014
Condition:
New
Price: $8.89
Description: 5/16"-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5", 7.625", 8.2", 8.5", 12 bolt passenger car and truck.
Item #: FDHC-YSPBLT-075
Condition:
New
Price: $6.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $15.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $10.89
Description: Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, seals, and...More Details »
Item #: FDHC-YSPBLT-080
Condition:
New
Price: $8.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.0-373
Condition:
New
Price: $503.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.0-411
Condition:
New
Price: $484.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-273
Condition:
New
Price: $517.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-308
Condition:
New
Price: $607.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-323
Condition:
New
Price: $372.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-342
Condition:
New
Price: $378.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-390
Condition:
New
Price: $458.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-411
Condition:
New
Price: $498.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-456
Condition:
New
Price: $371.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-488
Condition:
New
Price: $375.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-513
Condition:
New
Price: $458.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-538
Condition:
New
Price: $458.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.2-342R
Condition:
New
Price: $508.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.2-373R
Condition:
New
Price: $508.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.2-411R
Condition:
New
Price: $508.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.2-456R
Condition:
New
Price: $434.89
Description: Inner axle retaining snap ring for 7.2" GM.
Item #: FDHC-YSPSR-011
Condition:
New
Price: $10.89
Description: Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226.
Item #: FDHC-YSPCG-003
Condition:
New
Price: $11.89