- Home »
- Catalog
Complete Offroad » 2009, F-150 1/2 Ton
Products for:
- Year: 2009
- Model: F-150 1/2 Ton
View Universal items for: 2009 F-150 1/2 Ton
Browse Products
Description: Pinion nut for GM 7.6" IRS, 8.6" IRS and some Ford 9.75", Check threads for proper fit before installing. 22mm x 1.5mm, Uses 32mm socket
Item #: FDHC-YSPPN-013
Condition:
New
Price: $14.89
Description: Pinion nut for Ford 7.5", 8", 8.8", 9 3/8" & 9". 1 1/6" socket, 3/4" x 20 thread.
Item #: FDHC-YSPPN-020
Condition:
New
Price: $10.89
Description: Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25", 10.5" & some 9.75". 7/8-20 thread, 1 1/8 socket
Item #: FDHC-YSPPN-012
Condition:
New
Price: $12.89
Description: Pinion seal for 10.25" Ford. Yukon Mighty seal.
Item #: FDHC-YMS4278
Condition:
New
Price: $18.89
Description: Pinion seal for 7.5", 8.8", and 9.75" Ford, and also 1985-'86 9" Ford. Yukon Mighty seal.
Item #: FDHC-YMS3604
Condition:
New
Price: $11.89
Description: Replacement extra large clamshells for use with Yukon Carrier Bearing Puller Sets: YT P20 & YT P22. Fits Dana 70HD, Dana 80, AAM 11.5", Ford 9.75", Ford 10.25" & Ford 10.5".
Item #: FDHC-YT P12
Condition:
New
Price: $205.89
Description: Replacement Pinion depth shims for Dana 70HD, Dana 70, Ford 10.25" & 10.5"
Item #: FDHC-SK 30797
Condition:
New
Price: $17.89
Description: Ring Gear bolt for Ford 10.25" & 10.5". 1/2" x 20.
Item #: FDHC-YSPBLT-012
Condition:
New
Price: $5.89
Description: Seal housing for Ford 10.25" & 10.5", Zip locker, with O-rings.
Item #: FDHC-YZLASH-05
Condition:
New
Price: $77.89
Description: Side gear thrust washer (0.750" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-028
Condition:
New
Price: $8.89
Description: Side gear thrust washer (0.875" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-030
Condition:
New
Price: $14.89
Description: Standard Open case for Ford 9.75". This is a bare case and does not come with any internal components. This part carries a one year warranty against manufacturing defects.
Item #: FDHC-YC F975500
Condition:
New
Price: $353.89
Description: Standard open cross pin shaft (.750") for Ford 8", 8.8", 9" and Model 20.
Item #: FDHC-YSPXP-027
Condition:
New
Price: $17.89
Description: Steel cover for Ford 8.8"
Item #: FDHC-YP C5-F8.8-S
Condition:
New
Price: $85.89
Description: Steel cover for Ford 9.75"
Item #: FDHC-YP C5-F9.75
Condition:
New
Price: $109.89
Description: Stub axle snap ring clip for 8.8" Ford IFS.
Item #: FDHC-YSPSR-010
Condition:
New
Price: $35.89
Description: 10.25" Ford carrier Supershims.
Item #: FDHC-SK SSF10.25
Condition:
New
Price: $48.89
Description: Super Carrier Shim kit for Ford 8.8", GM 12 bolt car & truck, 8.6 & Vette
Item #: FDHC-SK SS12
Condition:
New
Price: $42.89
Description: 9.75" Ford Supershim carrier shim kit.
Item #: FDHC-SK SSF9.75
Condition:
New
Price: $91.89
Description: Trac-Loc spring for Ford 8.8", 31 spline
Item #: FDHC-YSPSPR-005
Condition:
New
Price: $44.89
Yukon Gear and Axle TracLoc Positraction Clutch Set for 3 Pinion Design for 10.5" Ford - YPKF10.5-PC
Description: TracLoc Positraction clutch set for 3 pinion design for 10.5" Ford.
Item #: FDHC-YPKF10.5-PC
Condition:
New
Price: $473.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLF10.25-35
Condition:
New
Price: $1,148.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLF8.8-31
Condition:
New
Price: $1,099.89
Description: Yukon Ring & Pinion sets give you the confidence of knowing your running gears designed for the harshest of conditions. Whether its on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: FDHC-YG F9.75-513
Condition:
New
Price: $397.38
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F9.75-488-11
Condition:
New
Price: $533.89
Description: Yukon left hand axle for '09-'14 Ford F150. 35.375" long, 6 lug, 34 spline, 1.705" bearing journal. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.
Item #: FDHC-YA F975012
Condition:
New
Price: $329.89
Description: Yukon left hand axle for '09-'14 Ford F150. 35.375" long, 7 lug, 34 spline, 1.705" bearing journal. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.
Item #: FDHC-YA F975014
Condition:
New
Price: $325.89
Description: Yukon left hand rear axle for '04-'12 8.8" F150. Yukon axles offer a strength increase over stock while retaining a low cost. Yukon rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.
Item #: FDHC-YA F880046
Condition:
New
Price: $377.89
Description: Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Item #: FDHC-YY F100605
Condition:
New
Price: $306.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F9.75-CNV-K
Condition:
New
Price: $548.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F10.5-B
Condition:
New
Price: $738.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F10.5-C
Condition:
New
Price: $753.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F9.75-C
Condition:
New
Price: $497.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F8.8-A
Condition:
New
Price: $241.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F8.8-REV-B
Condition:
New
Price: $496.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F8.8-B
Condition:
New
Price: $290.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK F8.8
Condition:
New
Price: $54.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK F9.75
Condition:
New
Price: $124.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK F9.75-CNV-K
Condition:
New
Price: $396.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK F8.8-A
Condition:
New
Price: $155.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK F9.75
Condition:
New
Price: $332.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-NP504493
Condition:
New
Price: $218.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $149.89
Description: All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY F880631
Condition:
New
Price: $97.89
Description: Helps remove bearings using an extra-large clamshell style bearing puller. No returns.
Item #: FDHC-YT P14
Condition:
New
Price: $47.89
Description: Yukon Positraction internal gears for Ford 9.75" Dura Grip Posi, 34 spline. This kit fits Yukon Dura Grip ONLY. Will not work with factory trac Loc. Spider gears only, clutch plates not included.
Item #: FDHC-YPKF9.75-P-34-DG
Condition:
New
Price: $517.89
Description: Yukon Positraction shim kit (12 shims) for GM 8.2", GM 8.5"/ 8.6", 12T, 12P, Ford 8.8" & Cast Iron 'Vette
Item #: FDHC-YPKGM12-PC-SHIM
Condition:
New
Price: $38.89
Description: Yukon right hand axle for '09-'14 Ford F150. 33.75" long, 6 lug, 34 spline, 1.705" bearing journal. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.
Item #: FDHC-YA F975011
Condition:
New
Price: $359.89
Description: Yukon right hand axle for '09-'14 Ford F150. 33.75" long, 7 lug, 34 spline, 1.705" bearing journal. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.
Item #: FDHC-YA F975013
Condition:
New
Price: $346.89
Description: Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the best in heat-treating...More Details »
Item #: FDHC-YA F880045
Condition:
New
Price: $394.89
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-411
Condition:
New
Price: $361.70
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-390
Condition:
New
Please Call for Availability
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKF8.8-T/L-31
Condition:
New
Price: $336.89
Description: Yukon standard open carrier case & spiders, Ford 8.8", 31 spline
Item #: FDHC-YC F3180-S
Condition:
New
Price: $394.89
Description: Ford 10.25" & 10.5" carrier case, standard Open.
Item #: FDHC-YC F100500
Condition:
New
Limited Supply: Only 9 Left!
Price: $240.89
Description: 8.8" 31 spline standard Open case (7/8 X-PIN HOLE).
Item #: FDHC-YC F880502
Condition:
New
Price: $235.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKF10.25-S-35
Condition:
New
Price: $399.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKF8.8-S-31
Condition:
New
Price: $270.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKF9.75-S-34
Condition:
New
Price: $255.89
Description: Performance steel spool for 8.8" Ford with 31 spline axles. These performance spools are made from the highest quality materials to ensure high strength and long life in performance applications....More Details »
Item #: FDHC-YP FSF8.8-31
Condition:
New
Price: $567.89