- Home »
- Catalog
Complete Offroad » 2008
Products for:
- Year: 2008
View Universal items for: 2008
Browse Products
Description: Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
Item #: FDHC-BK C8.0-IFS-B
Condition:
New
Price: $302.89
Description: 10.25" & 10.5" cover gasket.
Item #: FDHC-YCGF10.25
Condition:
New
Price: $16.89
Description: Ford 7.5" & 8.8" ring gear bolt, standard Open & TracLoc. 7/16" x 20.
Item #: FDHC-YSPBLT-024
Condition:
New
Price: $8.89
Description: Ford 7.5" C/clip, TracLoc & standard Open.
Item #: FDHC-YSPCC-007
Condition:
New
Price: $10.89
Description: Ford 7.5", 8", 8.8", & 9" axle stud.
Item #: FDHC-YSPSTUD-005
Condition:
New
Price: $8.89
Description: 8.8" Reverse inner pinion bearing oil baffle.
Item #: FDHC-YSPBF-007
Condition:
New
Price: $15.89
Description: Ford 9.75" ring gear bolt. 12mm x 1.25.
Item #: FDHC-YSPBLT-015
Condition:
New
Price: $7.89
Description: Ford OEM steel differential cover
Item #: FDHC-YP C5-F7.5-S
Condition:
New
Price: $96.89
Description: Full-floating axle seal for GM 14T.Yukon Mighty seal.
Item #: FDHC-YMS2081
Condition:
New
Price: $11.89
Description: 14T cover gasket.
Item #: FDHC-YCGGM14T
Condition:
New
Price: $16.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $17.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $11.89
Description: 8.25IFS GM Right hand , 07-11 28Spline STUB AXLE SHAFT , 14.92" w/PILOT , 4WD (not AWD) .
Item #: FDHC-YA G15801499
Condition:
New
Price: $339.89
Description: 8.25IFS RIGHT HAND EXTREME INNER DISCONNECT STUB AXLE, '88-'08 GM 4WD FRONT, w/ needle bearing.
Item #: FDHC-YA GM19121908
Condition:
New
Price: $151.89
Description: GM 8.25" IFS case gasket, 2007 & up
Item #: FDHC-YCGGM8.25IFS
Condition:
New
Price: $39.89
Description: GM 8.25" IFS side adjuster, '07 & up
Item #: FDHC-YSPSA-010
Condition:
New
Price: $89.89
Description: 8.25IFS 07 & up GM side bearing adjuster lock ring.
Item #: FDHC-YSPSA-011
Condition:
New
Price: $38.89
Description: GM 9.25 IFS side seal, 1998 & up. Yukon Mighty seal.
Item #: FDHC-YMS710497
Condition:
New
Price: $31.89
Description: GM 9.25" IFS snap ring for outer stub.
Item #: FDHC-YSPSR-012
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades.
Item #: FDHC-CK GM9.5
Condition:
New
Price: $228.89
Description: GM 9.5" ring gear bolt. 12mm x 1.5.
Item #: FDHC-YSPBLT-017
Condition:
New
Price: $7.89
Description: Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, seals, and...More Details »
Item #: FDHC-YSPBLT-080
Condition:
New
Price: $9.89
Description: GM side gear spacer sleeve for GM 9.25" IFS
Item #: FDHC-YSPTW-074
Condition:
New
Price: $41.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-354
Condition:
New
Price: $748.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-373
Condition:
New
Price: $726.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60V-409
Condition:
New
Price: $1,135.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-411
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-430
Condition:
New
Price: $617.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-456
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-488
Condition:
New
Price: $541.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-513
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-538
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-586
Condition:
New
Price: $625.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-617
Condition:
New
Price: $614.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-717
Condition:
New
Price: $672.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-331
Condition:
New
Price: $1,071.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-354
Condition:
New
Price: $737.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-373
Condition:
New
Price: $537.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-411
Condition:
New
Price: $833.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-430
Condition:
New
Price: $619.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-463
Condition:
New
Price: $553.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-488
Condition:
New
Price: $638.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-513
Condition:
New
Price: $638.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-538
Condition:
New
Price: $638.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44JK-411RUB
Condition:
New
Price: $515.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44JK-456RUB
Condition:
New
Price: $474.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44JK-488RUB
Condition:
New
Price: $467.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44JK-513RUB
Condition:
New
Price: $515.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44JK-538RUB
Condition:
New
Price: $498.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS110-373
Condition:
New
Price: $1,934.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS110-411
Condition:
New
Price: $2,610.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS110-430
Condition:
New
Price: $2,610.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS110-488
Condition:
New
Price: $2,269.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS111-411
Condition:
New
Price: $2,269.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS111-444
Condition:
New
Price: $2,384.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS111-488
Condition:
New
Price: $2,269.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS130-430
Condition:
New
Price: $2,610.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS130-488
Condition:
New
Price: $2,269.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-342T
Condition:
New
Price: $493.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-373T
Condition:
New
Price: $520.89