- Home »
- Catalog
Complete Offroad » 2007, Jeep, Liberty
Products for:
- Year: 2007
- Make: Jeep
- Model: Liberty
View Universal items for: 2007 Jeep Liberty
Browse Products
Description: Model 35 (standard Open & TracLoc) 8.25" Chrysler TracLoc cross pin bolt.
Item #: FDHC-YSPBLT-048
Condition:
New
Price: $14.89
Description: O-ring for Dana 30 & Model 35 ZIP locker seal housing
Item #: FDHC-YZLAO-02
Condition:
New
Price: $11.89
Description: O-ring for Yukon Zip Locker Bulkhead fitting kit
Item #: FDHC-YZLAO-05
Condition:
New
Price: $12.89
Description: Replacement oil baffle for Model 35 IFS front, Dana 25, 27, 30, 44 IFS & disconnect and Dana 50.
Item #: FDHC-YSPBF-003
Condition:
New
Price: $7.89
Description: Outer axle seal for Jeep Liberty front.
Item #: FDHC-YMSS1017
Condition:
New
Price: $33.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25", 10.5" & some 9.75". 7/8-20 thread, 1 1/8 socket
Item #: FDHC-YSPPN-012
Condition:
New
Price: $12.89
Description: Pinion nut for Chrysler 7.25", 8.0" IFS, 8.25", 8.75" fine spline, 9.25" front & rear, 7/16" x 14.
Item #: FDHC-YSPPN-008
Condition:
New
Price: $9.89
Description: Pinion seal for Jeep Liberty front.
Item #: FDHC-YMSC1006
Condition:
New
Price: $62.89
Description: Polished Aluminum Replacement Cover for Dana 30 standard rotation
Item #: FDHC-YP C2-D30-STD
Condition:
New
Price: $198.89
Description: Pump up kit, Zip Locker.
Item #: FDHC-YZLPUK
Condition:
New
Price: $170.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement Chrome Cover for Dana 30 Standard rotation
Item #: FDHC-YP C1-D30-STD
Condition:
New
Price: $53.89
Description: Replacement cover gasket for Dana 30
Item #: FDHC-YCGD30
Condition:
New
Price: $12.89
Description: Replacement cross pin shaft for standard open Dana 30
Item #: FDHC-YSPXP-011
Condition:
New
Price: $14.89
Description: Replacement Crush sleeve for Dana 30 Reverse front JK & Rubicon JK front. Approx. 1.440" long.
Item #: FDHC-YSPCS-048
Condition:
New
Price: $22.89
Description: Replacement outer oil slinger for Dana 25, 27, 30, 44 & 50
Item #: FDHC-YSPBF-012
Condition:
New
Price: $7.89
Description: Replacement outer slinger for Dana 30HD Liberty
Item #: FDHC-YSPBF-021
Condition:
New
Price: $10.89
Description: Replacement Pinion depth shims for Dana 35, Model 35 & Chrysler 7.25"
Item #: FDHC-SK 31402
Condition:
New
Price: $18.89
Description: Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8" x 24.
Item #: FDHC-YSPBLT-008
Condition:
New
Price: $10.89
Description: Ring gear bolt for C200F front and '05 7 up Chrysler 8.25" rear.
Item #: FDHC-YSPBLT-002
Condition:
New
Price: $10.89
Description: Replacement ring gear bolt for Model 20, Grand Cherokee 35, "Super" Dana 30 & Dana 50. 7/16" x 20.
Item #: FDHC-YSPBLT-010
Condition:
New
Price: $6.89
Description: Steel cover for Dana 30 standard rotation front
Item #: FDHC-YP C5-D30-STD
Condition:
New
Price: $123.89
Description: ZIP locker front switch cover.
Item #: FDHC-YZLASC-F
Condition:
New
Price: $9.89
Description: ZIP locker switch.
Item #: FDHC-YZLASW-01
Condition:
New
Price: $15.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
NEW!
Description: Geared for the installer, this quality Yukon kit is a true time-saver. It includes a carrier bearing puller, axle bearing puller, housing spreader, and a highly effective Yukon Multi-Shim Driver (YT SD-01).
Item #: FDHC-YT KIT-1
Condition:
New
Price: $2,460.89
Description: Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications.
Item #: FDHC-YC D708115
Condition:
New
Price: $372.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C8.25-C
Condition:
New
Price: $294.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D30-SUP-KJ
Condition:
New
Price: $409.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C8.25-B
Condition:
New
Price: $33.89
Description: Outer axle bearing for Jeep Liberty front
Item #: FDHC-YB AX-007
Condition:
New
Price: $22.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $149.89
Description: Yukon replacement standard open carrier case for Dana 30, 3.54 & down, 1.810" tall. If purchasing this case for a D30 JK front, you will need to also purchase spider gear set YPKD30-S-27.
Item #: FDHC-YC D706007
Condition:
New
Limited Supply: Only 6 Left!
Price: $173.89
Description: Yukon replacement standard open carrier case for Dana 30, 3.73 & up, 1.943" tall. If purchasing this case for a D30 JK front, you will need to also purchase spider gear set YPKD30-S-27.
Item #: FDHC-YC D706008
Condition:
New
Price: $152.89
Description: Yukon replacement standard open loaded carrier for Liberty Dana 30, 3.54 & down
Item #: FDHC-YC D708254
Condition:
New
Price: $259.64
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD30-S-27-KJ
Condition:
New
Price: $242.89
Description: Adjusts the threaded side adjusters for setting backlash and carrier bearing preload. No return.
Item #: FDHC-YT A06
Condition:
New
Price: $185.89
Description: Yukon standard open carrier case for Chrysler 8.25", 29 spline, 2.56 & up, 1997 & up only
Item #: FDHC-YC C52069428
Condition:
New
Price: $509.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKC8.25-S-29
Condition:
New
Price: $292.89
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89
Description: Yukon yoke for '01-'07 Jeep Liberty front. 26 spline, round yoke with 6 bolt flange, 1.846" seal diameter. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C5066050AB
Condition:
New
Price: $209.89
Description: Yukon yoke for Chrysler 7.25" and 8.25" with a 1310 U/joint size. 3.219" snap ring span, 1.062" cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C3723252
Condition:
New
Price: $154.89
Description: Yukon yoke for Chrysler 7.25" and 8.25" with a 7260 U/joint size. 2.125" snap ring span, 1.078" cap diameter. Inside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C3723251
Condition:
New
Price: $286.89
Description: Yukon yoke for Chrysler 7.25" and 8.25" with a 7290 U/joint size. 2.625" snap ring span. 1.125" cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C4137976
Condition:
New
Price: $378.89
Description: Yukon yoke for Chrysler 8.25" with 27 spline axles and a 1330 U/joint size. 3.625" snap ring span, 1.062" cap diameter. Outside snap ring. This yoke uses straps, with outside snap rings on Jeep...More Details »
Item #: FDHC-YY C52070345
Condition:
New
Price: $342.33
Description: Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Item #: FDHC-YY C52068839
Condition:
New
Price: $171.89
Description: Yukon Zip Locker Bulkhead fitting kit
Item #: FDHC-YZLABF-KIT
Condition:
New
Price: $34.89
Description: The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability.
Item #: FDHC-YZLD30-4-27
Condition:
New
Price: $1,275.89
Description: Fits Dana Spicer 30 with 30 spline axles 3.73 and up ratio only Forged case and 8620 internals for added strength Works with a variety of air delivery systems Assembled in the USA
The...More Details »
Item #: FDHC-YZLD30-4-30
Condition:
New
Price: $1,182.89
Description: Yukon Zip locker install kit
Item #: FDHC-YZLIK-01
Condition:
New
Price: $242.89