- Home »
- Catalog
Complete Offroad » 2007, Explorer Sport Trac
Products for:
- Year: 2007
- Model: Explorer Sport Trac
View Universal items for: 2007 Explorer Sport Trac
Browse Products
NEW!
Description: 7.5", 8", 8.8", 9", 10.25" Ford REDI sleeve yoke saver. Yukon Mighty seal.
Item #: FDHC-YMS99181
Condition:
New
Price: $34.89
Description: 8.8" Ford 3/4" Notched cross pin shaft (0.750", '85 and older). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Item #: FDHC-YSPXP-057
Condition:
New
Please Call for Availability
Description: 8.8" Ford 7/8" diameter Notched cross pin shaft (.875" for '86 and newer). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Item #: FDHC-YSPXP-059
Condition:
New
Please Call for Availability
Description: 8.8" Ford cover gasket.
Item #: FDHC-YCGF8.8
Condition:
New
Price: $12.89
Description: 8.8" Ford low profile TA HD Aluminum rear Cover. This cover will not fit vehicles with independent rear suspension.
Item #: FDHC-YP C3-F8.8-B
Condition:
New
Price: $346.89
Description: 8.8" Ford TracLoc clutch set (Carbon), both sides, 2003-2010 Cobra SVT.
Item #: FDHC-YPKF8.8-PC-C
Condition:
New
Please Call for Availability
Description: 8.8" Ford TracLoc (with long ears--for early models only) clutch set, both sides.
Item #: FDHC-YPKF8.8-PC
Condition:
New
Price: $199.89
Description: 8.8" Ford TracLoc (with short ears--for late models only) clutch set, both sides.
Item #: FDHC-YPKF8.8-PC-L
Condition:
New
Price: $228.89
Description: 8.8" Ford Yukon Dura Grip Limited Slip, 31 Spline Positraction Composite Clutches
Item #: FDHC-YDGF8.8-31-1
Condition:
New
Price: $820.89
Description: ABS carrier case exciter ring (tone ring) with 108 teeth for 8.8" Ford.
Item #: FDHC-YSPABS-017
Condition:
New
Price: $143.89
Description: Axle ABS tone ring for '03 & up Crown Victoria, 3.6" diameter, 35 teeth
Item #: FDHC-YSPABS-026
Condition:
New
Price: $27.89
Description: Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Item #: FDHC-YMS8835S
Condition:
New
Price: $10.89
Description: AXLE STUD , 58MM X M14-2.0 .
Item #: FDHC-YSPSTUD-033
Condition:
New
Price: $8.89
Description: Axle stud, 1/2" x 2", screw in design
Item #: FDHC-YSPSTUD-036
Condition:
New
Price: $7.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for AMC Model 35 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK M35
Condition:
New
Please Call for Availability
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8" differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK F8.8
Condition:
New
Price: $123.89
Description: Chrome cover for 8.8" Ford.
Item #: FDHC-YP C1-F8.8
Condition:
New
Price: $65.89
Description: Cover bolt for Ford 7.5", 8.8" & 9.75"
Item #: FDHC-YSPBLT-079
Condition:
New
Price: $7.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft (0.875") for '86 and newer 8.8" Ford.
Item #: FDHC-YSPXP-026
Condition:
New
Price: $42.89
Description: Crush Sleeve for Model 20, Ford 10.25", 10.5", 7.5", 8.8", 9 3/8", 9" & 9.75". .480" long.
Item #: FDHC-YSPCS-002
Condition:
New
Price: $10.89
Description: Crush Sleeve for Model 35, Chrysler 7.25", 8.25" Ford 8" & GM 7.75". Approx. 0.480" long.
Item #: FDHC-YSPCS-010
Condition:
New
Price: $8.89
Description: 2 piece solid spacer for Ford 8.8 and 7.5.
Item #: FDHC-SK CSF8.8
Condition:
New
Price: $83.89
Description: Ford 7.5" & 8.8" ring gear bolt, standard Open & TracLoc. 7/16" x 20.
Item #: FDHC-YSPBLT-024
Condition:
New
Price: $7.89
Description: Ford 7.5", 8", 8.8", & 9" axle stud.
Item #: FDHC-YSPSTUD-005
Condition:
New
Price: $7.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-308
Condition:
New
Price: $427.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-327
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-331
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-355
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-373
Condition:
New
Price: $406.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-411
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-430
Condition:
New
Price: $501.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-456
Condition:
New
Price: $464.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-488
Condition:
New
Price: $476.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-513
Condition:
New
Price: $476.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-571
Condition:
New
Price: $620.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-307
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-355
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-373
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-411
Condition:
New
Price: $302.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-456
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-488
Condition:
New
Price: $394.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-513
Condition:
New
Price: $394.89
Description: Main Cap stud kit for Ford 7.5", 8.8", 9", 10.25", Dana 44, 60, and 70.
Item #: FDHC-YP TA-1816
Condition:
New
Limited Supply: Only 5 Left!
Price: $145.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSF8.8-31
Condition:
New
Price: $241.89
Description: Replacement oil baffle for Model 35 IFS front, Dana 25, 27, 30, 44 IFS & disconnect and Dana 50.
Item #: FDHC-YSPBF-003
Condition:
New
Price: $7.89
Description: Replacement outer oil slinger for Ford 7.5", 8.8", 9", 10.25", Nissan M226 Rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Item #: FDHC-YSPBF-023
Condition:
New
Price: $10.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion gear thrust washer (0.750" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-027
Condition:
New
Price: $11.89
Description: Pinion gear thrust washer (0.875" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-029
Condition:
New
Price: $14.89
Description: Pinion nut for Ford 7.5", 8", 8.8", 9 3/8" & 9". 1 1/6" socket, 3/4" x 20 thread.
Item #: FDHC-YSPPN-020
Condition:
New
Price: $10.89
Description: Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25", 10.5" & some 9.75". 7/8-20 thread, 1 1/8 socket
Item #: FDHC-YSPPN-012
Condition:
New
Price: $12.89
Description: Pinion seal for 7.5", 8.8", and 9.75" Ford, and also 1985-'86 9" Ford. Yukon Mighty seal.
Item #: FDHC-YMS3604
Condition:
New
Price: $11.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement outer stub dust shield for Dana 30, Dana 44 & Model 35
Item #: FDHC-YSPBF-016
Condition:
New
Price: $8.89
Description: Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8" x 24.
Item #: FDHC-YSPBLT-008
Condition:
New
Price: $10.89
Description: Side gear thrust washer (0.750" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-028
Condition:
New
Price: $8.89