- Home »
- Catalog
Complete Offroad » 2007, Aspen
Products for:
- Year: 2007
- Model: Aspen
View Universal items for: 2007 Aspen
Browse Products
Description: Chrysler 9.25" Dura Grip case, bare.
Item #: FDHC-YC C9.25-DG
Condition:
New
Price: $396.89
Description: Chrysler fine spline pinion nut for Chrysler 7.25", 8", 8.25", 8.75", and 9.25".
Item #: FDHC-YSPPN-038
Condition:
New
Price: $33.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft for 8.25" Chrysler.
Item #: FDHC-YSPXP-003
Condition:
New
Price: $44.89
Description: Cross pin shaft for standard open Chrysler 9.25", .860" diameter. Will not fit Posi!
Item #: FDHC-YSPXP-006
Condition:
New
Price: $44.89
Description: Crush Sleeve for Model 35, Chrysler 7.25", 8.25" Ford 8" & GM 7.75". Approx. 0.480" long.
Item #: FDHC-YSPCS-010
Condition:
New
Price: $8.89
Description: Crush Sleeve for Chrysler 8" & 9.25" rear. Approx. 0.630" long.
Item #: FDHC-YSPCS-011
Condition:
New
Price: $10.89
Description: Crush sleeve eliminator kit for GM 8.5" & Chrysler 9.25"
Item #: FDHC-SK CSGM8.5
Condition:
New
Price: $50.89
Description: Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Item #: FDHC-YPKD44-PC-T/L
Condition:
New
Price: $129.89
Description: Replacement pinion nut washer for Dana 44 JK, 60, 70U, '08 & newer Ford 10.5" & Nissan Titan rear.
Item #: FDHC-YSPPN-030
Condition:
New
Price: $6.89
Description: Differential carrier side bearing screw adjuster for Chrysler 7.25" and 8.25".
Item #: FDHC-YSPSA-002
Condition:
New
Price: $47.89
Description: Differential side bearing screw adjuster for 9.25" Chrysler.
Item #: FDHC-YSPSA-001
Condition:
New
Price: $42.89
Description: Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
Item #: FDHC-BK C8.0-IFS-B
Condition:
New
Price: $274.89
Description: Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226.
Item #: FDHC-YSPCG-003
Condition:
New
Price: $11.89
Description: Model 35 (standard Open & TracLoc) 8.25" Chrysler TracLoc cross pin bolt.
Item #: FDHC-YSPBLT-048
Condition:
New
Price: $14.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion nut for Chrysler 7.25", 8.0" IFS, 8.25", 8.75" fine spline, 9.25" front & rear, 7/16" x 14.
Item #: FDHC-YSPPN-008
Condition:
New
Price: $9.89
Description: Replacement redi-sleeve yoke saver for 8.75" c, 9.25" c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Item #: FDHC-YMS99187
Condition:
New
Price: $31.89
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement Carrier shim kit for Dana Spicer 44, 30 spline axles
Item #: FDHC-SK 30214
Condition:
New
Price: $16.89
Description: Ring gear bolt for C200F front and '05 7 up Chrysler 8.25" rear.
Item #: FDHC-YSPBLT-002
Condition:
New
Price: $10.89
Description: Ring gear bolt for Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS front. 3/8" x 24.
Item #: FDHC-YSPBLT-005
Condition:
New
Price: $8.89
Description: Ring gear bolt for Chrysler 9.25" rear, 7/16" x 18.
Item #: FDHC-YSPBLT-003
Condition:
New
Price: $8.89
Description: Rubber fill plug for Chrysler
Item #: FDHC-YSPFP-03
Condition:
New
Price: $30.89
Description: Six piece side gear thrust washer kit for Chrysler 8" and 9.25".
Item #: FDHC-YSPTW-008
Condition:
New
Price: $88.89
Description: Standard Open notched cross pin shaft for 9.25" Chrysler.
Item #: FDHC-YSPXP-004
Condition:
New
Price: $76.89
Description: Steel cover for Chrysler 9.25" rear
Item #: FDHC-YP C5-C9.25-R
Condition:
New
Price: $98.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
Description: Geared for the installer, this quality Yukon kit is a true time-saver. It includes a carrier bearing puller, axle bearing puller, housing spreader, and a highly effective Yukon Multi-Shim Driver (YT SD-01).
Item #: FDHC-YT KIT-1
Condition:
New
Price: $2,460.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C9.25-R-B
Condition:
New
Price: $366.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C8.0-IFS-B
Condition:
New
Price: $502.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C8.25-C
Condition:
New
Price: $294.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C8.25-B
Condition:
New
Price: $33.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C8.0-IFS
Condition:
New
Price: $152.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C9.25-R
Condition:
New
Price: $37.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C8.0-IFS-B
Condition:
New
Price: $259.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C9.25-R
Condition:
New
Price: $259.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-NP524102
Condition:
New
Price: $176.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M804049
Condition:
New
Price: $149.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $149.89
Description: Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set. All components come with a one...More Details »
Item #: FDHC-YPKC9.25-P-31
Condition:
New
Price: $382.89
Description: Adjusts the threaded side adjusters for setting backlash and carrier bearing preload. No return.
Item #: FDHC-YT A06
Condition:
New
Price: $185.89
Description: Yukon standard open carrier case for '10 & down Chrysler 9.25" rear.
Item #: FDHC-YC C4384222
Condition:
New
Price: $241.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKC9.25-S-31
Condition:
New
Price: $317.89
Description: Yukon Gear & Axle manufactures a full line of open and positraction limited slip carrier cases. Each unit is cast and machined to exacting specifications to ensure both high strength and tight...More Details »
Item #: FDHC-YC C925001
Condition:
New
Price: $400.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKC8.25-S-29
Condition:
New
Price: $292.89
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89
Description: Yukon yoke for Chrysler 9.25" with a 7290 U/joint size. 2.625" snap ring span. 1.125" cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C3432487
Condition:
New
Price: $281.89