- Home »
- Catalog
Complete Offroad » 2006, Dodge, Ram 1500 1/2 Ton
Products for:
- Year: 2006
- Make: Dodge
- Model: Ram 1500 1/2 Ton
View Universal items for: 2006 Dodge Ram 1500 1/2 Ton
Browse Products
Description: Dana 44, Dana 60, & 9.25" TracLoc clutch clip / guide
Item #: FDHC-YSPCG-001
Condition:
New
Price: $9.89
Description: Chrysler 9.25" Dura Grip case, bare.
Item #: FDHC-YC C9.25-DG
Condition:
New
Price: $396.89
Description: Chrysler fine spline pinion nut for Chrysler 7.25", 8", 8.25", 8.75", and 9.25".
Item #: FDHC-YSPPN-038
Condition:
New
Price: $33.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft for standard open Chrysler 9.25", .860" diameter. Will not fit Posi!
Item #: FDHC-YSPXP-006
Condition:
New
Price: $44.89
Description: Crush Sleeve for Chrysler 8" & 9.25" rear. Approx. 0.630" long.
Item #: FDHC-YSPCS-011
Condition:
New
Price: $10.89
Description: Crush Sleeve for Chrysler 9.25" front, GM 8.6" IRS, 9.25" IFS & 9.5". Approx. 0.640" long.
Item #: FDHC-YSPCS-016
Condition:
New
Price: $8.89
Description: Crush sleeve eliminator kit for GM 8.5" & Chrysler 9.25"
Item #: FDHC-SK CSGM8.5
Condition:
New
Price: $50.89
Description: Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Item #: FDHC-YPKD44-PC-T/L
Condition:
New
Price: $129.89
Description: Differential side bearing screw adjuster for 9.25" Chrysler.
Item #: FDHC-YSPSA-001
Condition:
New
Price: $42.89
Description: GM 9.5" ring gear bolt. 12mm x 1.5.
Item #: FDHC-YSPBLT-017
Condition:
New
Price: $13.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-321
Condition:
New
Price: $513.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-355
Condition:
New
Price: $658.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-390
Condition:
New
Price: $525.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-411
Condition:
New
Price: $658.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-456
Condition:
New
Price: $514.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-488
Condition:
New
Price: $514.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.0-390
Condition:
New
Price: $635.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.0-411
Condition:
New
Price: $595.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.0-456
Condition:
New
Price: $595.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25R-342R
Condition:
New
Price: $538.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25R-373R
Condition:
New
Price: $646.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25R-411R
Condition:
New
Price: $538.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25R-456R
Condition:
New
Price: $538.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25R-488R
Condition:
New
Price: $541.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C10.5-411
Condition:
New
Price: $667.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C10.5-456
Condition:
New
Price: $675.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C10.5-373
Condition:
New
Price: $667.89
Description: Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226.
Item #: FDHC-YSPCG-003
Condition:
New
Price: $11.89
Description: Lower ball joint for Chrysler 9.25" front
Item #: FDHC-YSPBJ-002
Condition:
New
Price: $82.89
Description: Pinion nut for Chrysler 7.25", 8.0" IFS, 8.25", 8.75" fine spline, 9.25" front & rear, 7/16" x 14.
Item #: FDHC-YSPPN-008
Condition:
New
Price: $9.89
Description: DODGE 9.25" REAR PINION SEAL , 00 & UP .
Item #: FDHC-YMS710481
Condition:
New
Price: $39.89
Description: Pinion seal for '03 & up Chrysler 8" front differential.
Item #: FDHC-YMSC1015
Condition:
New
Price: $30.89
Description: Replacement Carrier shim kit for Dana Spicer 44, 30 spline axles
Item #: FDHC-SK 30214
Condition:
New
Price: $16.89
Description: Ring gear bolt for Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS front. 3/8" x 24.
Item #: FDHC-YSPBLT-005
Condition:
New
Price: $8.89
Description: Ring gear bolt for Chrysler 9.25" rear, 7/16" x 18.
Item #: FDHC-YSPBLT-003
Condition:
New
Price: $8.89
Description: Side adjuster for 9.25" AAM Dodge front.
Item #: FDHC-YSPSA-005
Condition:
New
Price: $74.89
Description: Six piece side gear thrust washer kit for Chrysler 8" and 9.25".
Item #: FDHC-YSPTW-008
Condition:
New
Price: $88.89
Description: Standard open cross pin shaft for 10.5" Dodge.
Item #: FDHC-YSPXP-001
Condition:
New
Price: $43.89
Description: Standard Open notched cross pin shaft for 9.25" Chrysler.
Item #: FDHC-YSPXP-004
Condition:
New
Price: $76.89
Description: Steel cover for Chrysler 9.25" front
Item #: FDHC-YP C5-C9.25-F
Condition:
New
Price: $185.89
Description: Steel cover for Chrysler 9.25" rear
Item #: FDHC-YP C5-C9.25-R
Condition:
New
Price: $98.89
Description: Upper ball joint for Chrysler 9.25" front
Item #: FDHC-YSPBJ-003
Condition:
New
Price: $104.89
Description: Wheel stud for 2009-2011 Dodge 2500 & 3500 front
Item #: FDHC-YSPSTUD-035
Condition:
New
Price: $8.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C9.25-R-B
Condition:
New
Price: $366.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C8.0-IFS-C
Condition:
New
Price: $548.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C10.5
Condition:
New
Price: $533.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C9.25-F
Condition:
New
Price: $531.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C8.0-IFS
Condition:
New
Price: $152.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C9.25-F
Condition:
New
Price: $70.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C9.25-R
Condition:
New
Price: $37.89
Description: Yukon outer stub axle for Chrysler 9.25" front. This axle uses a 1485 u/joint and has 33 splines.
Item #: FDHC-YA C5175269AA
Condition:
New
Price: $240.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C9.25-F
Condition:
New
Price: $266.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C8.0-IFS-C
Condition:
New
Price: $243.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C9.25-R
Condition:
New
Price: $259.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-NP524102
Condition:
New
Price: $176.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M804049
Condition:
New
Price: $149.89
Description: Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set. All components come with a one...More Details »
Item #: FDHC-YPKC9.25-P-31
Condition:
New
Price: $382.89
Description: Yukon rear axle for '07-'10, 34 1/8" long, 1.705" bearing, includes ABS ring
Item #: FDHC-YA C52114720AB
Condition:
New
Price: $309.89
Description: Yukon rear Chrysler 9.25 axle for '07-'10 Ram 1500, 34 1/8" long, 1.705" bearing, w/o ABS
Item #: FDHC-YA C68045427AA
Condition:
New
Price: $273.89