- Home »
- Catalog
Complete Offroad » 2005, Tacoma
Products for:
- Year: 2005
- Model: Tacoma
View Universal items for: 2005 Tacoma
Browse Products
Description: Ring & Pinion Gear Kit Package Front & Rear with Installation Kits fits Toyota 8.4/8"IFS Differential (Without Factory Locker Fits 3.91 & Up Front Case) 4.56 Ratio
Item #: FDHC-YGKT005-456-4
Condition:
New
Price: $1,999.89
Description: Ring & Pinion Gear Kit Package Front & Rear with Installation Kits fits Toyota 8.4/8"IFS Differential (Without Factory Locker Fits 3.73 & Down Front Case) 4.88 Ratio
Item #: FDHC-YGKT005-488-3
Condition:
New
Price: $1,999.89
Description: Ring & Pinion Gear Kit Package Front & Rear with Installation Kits fits Toyota 8.4/8"IFS Differential (Without Factory Locker Fits 3.91 & Up Front Case) 4.88 Ratio
Item #: FDHC-YGKT005-488-4
Condition:
New
Price: $1,999.89
Description: Ring & Pinion Gear Kit Package Front & Rear with Installation Kits fits Toyota 8.4/8"IFS Differential (Without Factory Locker Fits 3.91 & Up Front Case) 5.29 Ratio
Item #: FDHC-YGKT005-529-4
Condition:
New
Price: $1,999.89
Description: Ring Gear bolt for Toyota 7.5", 8", V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.
Item #: FDHC-YSPBLT-031
Condition:
New
Price: $6.89
Description: Ring Gear bolt for Toyota T100, Tacoma & 8" IFS front. 12mm x 1.0.
Item #: FDHC-YSPBLT-030
Condition:
New
Price: $11.89
Description: T100 & Tacoma roll pin
Item #: FDHC-YSPXP-052
Condition:
New
Price: $11.89
Description: T100 & Tacoma standard cross pin shaft
Item #: FDHC-YSPXP-049
Condition:
New
Price: $78.89
Description: T100 & Tacoma standard pinion gear Thrust washer
Item #: FDHC-YSPTW-058
Condition:
New
Price: $26.89
Description: T100 & Tacoma standard side gear Thrust washer 1.60MM
Item #: FDHC-YSPTW-061
Condition:
New
Price: $21.89
Description: T100 & Tacoma w/LOC pinion nut.
Item #: FDHC-YSPPN-023
Condition:
New
Price: $11.89
Description: T8, TV6 T100 rear ABS ring.
Item #: FDHC-YSPABS-024
Condition:
New
Price: $205.89
Description: Tacoma (w/out factory locker) & T100 (w/out factory locker) pinion seal. Yukon Mighty seal.
Item #: FDHC-YMST1007
Condition:
New
Price: $21.89
Description: Toyota 7.5 pinion nut (M18x1.5).
Item #: FDHC-YSPPN-021
Condition:
New
Price: $10.89
Description: Toyota 7.5" crush sleeve, 2.185" long.
Item #: FDHC-YSPCS-032
Condition:
New
Price: $18.89
Description: Toyota 7.5", 8", & V6 ring gear bolt retainer plate (5 needed).
Item #: FDHC-YSPBLT-032
Condition:
New
Price: $7.89
Description: Toyota bearing retainer for 2001-2002 4Runner, 2001-2004 Tacoma & 2000-2006 Tundra
Item #: FDHC-YSPRET-003
Condition:
New
Price: $18.89
Description: Toyota clamshell design crush sleeve. Approx. 1.475" long.
Item #: FDHC-YSPCS-038
Condition:
New
Price: $13.89
Description: Toyota Landcruiser pinion nut, coarse spline, LARGE. 22mm x 1.5mm.
Item #: FDHC-YSPPN-024
Condition:
New
Price: $16.89
Description: Toyota T100 & Tacoma crush sleeve. Approx. 2.325" long.
Item #: FDHC-YSPCS-037
Condition:
New
Price: $19.89
Description: Toyota T100 & Tacoma pinion nut.
Item #: FDHC-YSPPN-026
Condition:
New
Price: $17.89
Description: Crush Sleeve Eliminator Solid Spacer Kit for Toyota 8.4" / T100 Rear
Item #: FDHC-SK CST100
Condition:
New
Price: $64.89
Description: Toyota T100/Tacoma/Tundra Yukon Dura Grip Limited Slip, 30 Spline Positraction Composite Clutches 4 Pinion Design
Item #: FDHC-YDGT100-30-1
Condition:
New
Price: $826.89
Description: Toyota V6, T100 pinion seal w/factory elec. locker & factory yoke (OE replacement ONLY).Yukon Mighty seal.
Item #: FDHC-YMST1012
Condition:
New
Price: $84.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TLCF-456R-CS-T
Condition:
New
Price: $508.89
Description: Toyota 8" Reverse Front 4.56 Ring & Pinion (CLAMSHL Design ONLY- fits3.91 & UP carrier) .
Item #: FDHC-YG TLCF-456R-CS
Condition:
New
Price: $480.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T100-390
Condition:
New
Price: $379.89
Description: Geared for the installer, this quality Yukon kit is a true time-saver. It includes a carrier bearing puller, axle bearing puller, housing spreader, and a highly effective Yukon Multi-Shim Driver (YT SD-01).
Item #: FDHC-YT KIT-1
Condition:
New
Price: $2,460.89
Description: Yukon Master Overhaul Kit for Toyota Tacoma and 4Runner, with OEM E-Locker, Includes Solid Spacer
Item #: FDHC-YK TACLOC-SPC
Condition:
New
Price: $609.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK TLC-REV-B
Condition:
New
Price: $599.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK TACOMA-LOC
Condition:
New
Price: $614.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T7.5-4CYL
Condition:
New
Price: $336.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T100
Condition:
New
Price: $480.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T100-SPC
Condition:
New
Price: $487.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up....More Details »
Item #: FDHC-MK T8CS-A
Condition:
New
Price: $122.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK TLC-REV-B
Condition:
New
Price: $122.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK T7.5-4CYL
Condition:
New
Price: $62.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK T100
Condition:
New
Price: $136.89
Description: Yukon Steel Spools provide maximum differential lockup for traction on the street or trail.
Item #: FDHC-YP FST100-30
Condition:
New
Price: $390.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK T7.5-4CYL
Condition:
New
Price: $306.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK TLC-REV-B
Condition:
New
Price: $339.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK T100
Condition:
New
Price: $401.89
Description: Yukon positraction internals for Toyota T100, Tacoma, Tundra, and Sequoia with 30 spline axles. This spider gaer kit fits Eatontractions ONLY. Yukon uses higher quality materials and better...More Details »
Item #: FDHC-YPKT100-P-30
Condition:
New
Please Call for Availability
Description: Yukon replacement unit bearing hub for '05-'16 Toyota Tacoma rear, left hand side
Item #: FDHC-YB U512294
Condition:
New
Price: $242.89
Description: Yukon replacement unit bearing hub for '05-'16 Toyota Tacoma rear, right hand side
Item #: FDHC-YB U512295
Condition:
New
Price: $206.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5-456
Condition:
New
Price: $433.89
Description: Yukon small hole yoke for '02 and older Toyota T100 and Tacoma (with locker) with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY T35080
Condition:
New
Price: $131.89
Description: Adjusts the threaded side adjusters for setting backlash and carrier bearing preload. No return.
Item #: FDHC-YT A04
Condition:
New
Price: $156.89
Description: T100 & TACOMA 8.4" 12 Bolt Rear, Standard Open Carrier Case. Bare Case w/o Internal Gears
Item #: FDHC-YC T34010
Condition:
New
Price: $329.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKT100-S-30
Condition:
New
Price: $447.89
Description: Yukon standard open spider gear set for Toyota 8" IFS front, clamshell design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All...More Details »
Item #: FDHC-YPKTLC-REV-30
Condition:
New
Price: $339.89
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89
Description: Yukon U/Joint for many Toyota applications. 2.047" snap ring span, 1.142" cap diameter. Inside snap ring.
Item #: FDHC-YUJ1510
Condition:
New
Price: $81.89
Description: Yukon yoke for '04 and newer Toyota T100 and Tacoma (without locker) with 30 spline. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY T34030
Condition:
New
Price: $129.89
Description: Yukon yoke for '04 and older Toyota Tacoma and T100 with 30 spline. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY T34010
Condition:
New
Price: $128.89
Description: Yukon yoke for Toyota 8" IFS clamshell design, '07 & up FJ, 05 & up Tacoma, T100 Tundra. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY T35110
Condition:
New
Price: $154.89
Description: Yukon yoke for Toyota V6 rear with 29 spline pinion
Item #: FDHC-YY T35040-29
Condition:
New
Price: $110.89
Description: Yukon yoke for Toyota V6 rear with 29 spline pinion, with pinion seal & pinion nu
Item #: FDHC-YY T35040-29-KIT
Condition:
New
Price: $138.89
Description: Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals.
Item #: FDHC-AK TOY
Condition:
New
Price: $112.89