- Home »
- Catalog
Complete Offroad » 2013, Chevrolet
Products for:
- Year: 2013
- Make: Chevrolet
View Universal items for: 2013 Chevrolet
Browse Products
Description: Cross pin shaft for 7.2" GM.
Item #: FDHC-YSPXP-035
Condition:
New
Price: $52.89
Description: Cross pin shaft for GM 9.5", fits standard & Yukon Dura Grip or Eaton Posi carrier.
Item #: FDHC-YSPXPGM9.5
Condition:
New
Please Call for Availability
Description: Crush Sleeve for Chrysler 9.25" front, GM 8.6" IRS, 9.25" IFS & 9.5". Approx. 0.640" long.
Item #: FDHC-YSPCS-016
Condition:
New
Price: $8.89
Description: Crush sleeve eliminator kit for GM 10.5" 14 bolt truck. This kit contains a solid spacer & shim kit to eliminate the crush sleeve and set pinion bearing preload.
Item #: FDHC-SK CSGM14T
Condition:
New
Price: $104.89
Description: Crush sleeve eliminator kit for GM 8.5" & Chrysler 9.25"
Item #: FDHC-SK CSGM8.5
Condition:
New
Price: $50.89
Description: Replacement Crush Sleeve for GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan M226 rear. Approx. 0.620" long.
Item #: FDHC-YSPCS-014
Condition:
New
Price: $8.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $19.89
Description: Eaton Positraction shim kit for GM 14T.
Item #: FDHC-YPKGM14T-PC-SHI
Condition:
New
Please Call for Availability
Description: Eaton Positraction shim kit for 9.5" GM.
Item #: FDHC-YPKGM9.5-PC-SHI
Condition:
New
Please Call for Availability
Description: Eaton-type 14 plate Carbon clutch set for 9.5" GM and 9.75" Ford.
Item #: FDHC-YPKGM9.5-PC-14
Condition:
New
Please Call for Availability
Description: Eaton-type Positraction Carbon clutch kit with 14 plates for GM 14T and 10.5"
Item #: FDHC-YPKGM14T-PC-14
Condition:
New
Please Call for Availability
Description: AAM 11.5" Finned aluminum cover for Dodge & GM
Item #: FDHC-YP C5-C11.5
Condition:
New
Price: $448.89
Description: 14T cover gasket.
Item #: FDHC-YCGGM14T
Condition:
New
Price: $14.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $15.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $10.89
Description: 8.25IFS GM Right hand , 07-11 28Spline STUB AXLE SHAFT , 14.92" w/PILOT , 4WD (not AWD) .
Item #: FDHC-YA G15801499
Condition:
New
Price: $308.89
NEW!
Description: 8.25IFS RIGHT HAND EXTREME INNER DISCONNECT STUB AXLE, '88-'08 GM 4WD FRONT, w/ needle bearing.
Item #: FDHC-YA GM19121908
Condition:
New
Price: $137.89
Description: GM 8.25" IFS case gasket, 2007 & up
Item #: FDHC-YCGGM8.25IFS
Condition:
New
Price: $35.89
Description: GM 8.25" IFS side adjuster, '07 & up
Item #: FDHC-YSPSA-010
Condition:
New
Price: $81.89
Description: 8.25IFS 07 & up GM side bearing adjuster lock ring.
Item #: FDHC-YSPSA-011
Condition:
New
Price: $34.89
Description: GM 9.25" IFS side adjuster lock, '11 & up.
Item #: FDHC-YSPSA-013
Condition:
New
Price: $36.89
Description: 9.25IFS GM 11 & up side bearing adjuster.
Item #: FDHC-YSPSA-012
Condition:
New
Price: $61.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades.
Item #: FDHC-CK GM9.5
Condition:
New
Please Call for Availability
Description: GM 9.5" ring gear bolt. 12mm x 1.5.
Item #: FDHC-YSPBLT-017
Condition:
New
Price: $13.89
NEW!
Description: Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, seals, and...More Details »
Item #: FDHC-YSPBLT-080
Condition:
New
Price: $8.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-342
Condition:
New
Price: $849.89
Description: Yukon engineers use state-of-the-art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish of our gear sets meet exacting...More Details »
Item #: FDHC-YG GM11.5-373
Condition:
New
Price: $797.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-411
Condition:
New
Price: $807.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-456
Condition:
New
Price: $917.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-488
Condition:
New
Price: $849.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-513
Condition:
New
Price: $668.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-538
Condition:
New
Price: $668.89
Description: Inner axle retaining snap ring for 7.2" GM.
Item #: FDHC-YSPSR-011
Condition:
New
Price: $10.89
Description: Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226.
Item #: FDHC-YSPCG-003
Condition:
New
Price: $11.89
NEW!
Description: Locking key / wedge for Dana 60 & 70 spindle nut
Item #: FDHC-YSPSP-039
Condition:
New
Price: $29.89
Description: Cover bolt for GM 7.25, 7.6, 8.0, 8.6, 9.25, 9.5, 14T & 11.5
Item #: FDHC-YSPBLT-082
Condition:
New
Price: $7.89
Description: Outer wheel bearing retaining snap ring for GM 14T.
Item #: FDHC-YSPSR-014
Condition:
New
Price: $27.89
Description: Pilot bearing for 10.5" 14 bolt truck, 2.050" O.D.
Item #: FDHC-YB PB-004
Condition:
New
Price: $50.89
Description: 14T GM pinion shim kit.
Item #: FDHC-SK GM14T
Condition:
New
Price: $31.89
Description: 8.75-42, 8.75-89, 9.25" Chrysler & GM, 9.5", 10.25" pinion shim kit.
Item #: FDHC-SK GM9.5
Condition:
New
Price: $23.89
Description: Pinion depth shims for 7.5" GM, 7.75" GM, 8.2" GM, 12T, & other
Item #: FDHC-SK 21104
Condition:
New
Price: $24.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion gear thrust washer for 8.25" GM IFS.
Item #: FDHC-YSPTW-039
Condition:
New
Price: $8.89
Description: Pinion nut for GM 7.6" IRS, 8.6" IRS and some Ford 9.75", Check threads for proper fit before installing. 22mm x 1.5mm, Uses 32mm socket
Item #: FDHC-YSPPN-013
Condition:
New
Price: $14.89
Description: Pinion nut for GM 7.2" IFS, 7.5", 7.6", 7.6" IFS, 8.0", 8.25", 8.5", 8.6", 9.25" IFS, 9.5" & Oldsmobile Dropouts. 1 1/4" socket, 7/8" x 14 thread.
Item #: FDHC-YSPPN-018
Condition:
New
Price: $10.89
Description: Pinion nut washer for GM 7.2" IFS, 7.5", 7.6", 7.6" IFS, 8.5", 8.6" & 9.5".
Item #: FDHC-YSPPN-033
Condition:
New
Price: $13.89
Description: Polished aluminum cover for 14T GM.
Item #: FDHC-YP C2-GM14T
Condition:
New
Price: $266.89
Description: Polished aluminum cover for 8.6", 8.2" and 8.5" GM rear. Includes 5/16 cover bolts.
Item #: FDHC-YP C2-GM8.5-R
Condition:
New
Price: $266.89
NEW!
Description: 8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver. Yukon Mighty seal.
Item #: FDHC-YMS99193
Condition:
New
Price: $48.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement bare case for GM 8.5" & 8.6" Yukon Dura Grip. Fits both 28 & 30 spline applications. This carrier case is for a Yukon Dura Grip ONLY. It is NOT a replacement carrier for a stock Positraction.
Item #: FDHC-YC GM8.5-DG-3
Condition:
New
Price: $396.89
Description: Replacement Carrier shim kit for Dana Spicer 44, 30 spline axles
Item #: FDHC-SK 30214
Condition:
New
Price: $16.89
Description: Ring gear bolt for GM 7.5", 7.6", 7.6" IRS, 8.0", 8.25" IFS, 8.5", 8.6" & 8.6" IRS. 7/16" x 20.
Item #: FDHC-YSPBLT-019
Condition:
New
Price: $6.89
Description: Side gear thrust washer for 8.25" GM IFS.
Item #: FDHC-YSPTW-040
Condition:
New
Price: $14.89
Description: Spindle nut for Dana 60 & 70, 1.940" I.D., with plastic ring. This replaces Spicer part number 39695.
Item #: FDHC-YSPSP-013
Condition:
New
Price: $25.89
Description: Spindle nut for Dana 60, 1.750" I.D., 6 sided. This replaces Spicer part number 30636.
Item #: FDHC-YSPSP-003
Condition:
New
Price: $17.89
Description: Spindle nut for GM 10.5" 14 bolt truck, 1.935" I.D., 6 holes
Item #: FDHC-YSPSP-037
Condition:
New
Price: $78.89
Description: Spindle nut retainer for Dana 60 & 70, 1.830" I.D., 10 outer tabs. This replaces Spicer part number 30637.
Item #: FDHC-YSPSP-004
Condition:
New
Price: $12.89