- Home »
- Catalog
Complete Offroad » 1999, Dodge, Dakota
Products for:
- Year: 1999
- Make: Dodge
- Model: Dakota
View Universal items for: 1999 Dodge Dakota
Browse Products
Description: 9.25" cross pin shaft TracLoc ONLY, not standard Open 0.870" DIA.
Item #: FDHC-YSPXP-005
Condition:
New
Price: $49.89
Description: 9.25" pinion gear thrust washer.
Item #: FDHC-YSPTW-004
Condition:
New
Price: $14.89
Description: ABS tone ring for 8.25" Chrysler.
Item #: FDHC-YSPABS-004
Condition:
New
Price: $61.89
Description: Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Item #: FDHC-YMS8835S
Condition:
New
Price: $10.89
Description: Axle stud, 1 33/64" X 1/2" -20.
Item #: FDHC-YSPSTUD-016
Condition:
New
Price: $8.89
Description: Bolt/screw for adjuster lock for Chrysler 7.25", 8.25", 8.75", 9.25".
Item #: FDHC-YSPBLT-051
Condition:
New
Price: $17.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for '76 & up Chrysler 8.25" rear
Item #: FDHC-CK C8.25-B
Condition:
New
Price: $81.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for AMC Model 35 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK M35
Condition:
New
Price: $103.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Chrysler 9.25" rear differential. This kit contains carrier bearings and races.
Item #: FDHC-CK C9.25-R
Condition:
New
Price: $177.89
Description: Chrome cover for 9.25" Chrysler.
Item #: FDHC-YP C1-C9.25
Condition:
New
Price: $75.89
Description: Dana 44, Dana 60, & 9.25" TracLoc clutch clip / guide
Item #: FDHC-YSPCG-001
Condition:
New
Price: $9.89
Description: Chrysler 9.25" Dura Grip case, bare.
Item #: FDHC-YC C9.25-DG
Condition:
New
Price: $396.89
Description: Chrysler fine spline pinion nut for Chrysler 7.25", 8", 8.25", 8.75", and 9.25".
Item #: FDHC-YSPPN-038
Condition:
New
Price: $33.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft for 8.25" Chrysler.
Item #: FDHC-YSPXP-003
Condition:
New
Price: $44.89
Description: Cross pin shaft for standard open Chrysler 9.25", .860" diameter. Will not fit Posi!
Item #: FDHC-YSPXP-006
Condition:
New
Price: $44.89
Description: Crush Sleeve for Model 35, Chrysler 7.25", 8.25" Ford 8" & GM 7.75". Approx. 0.480" long.
Item #: FDHC-YSPCS-010
Condition:
New
Price: $8.89
Description: Crush Sleeve for Chrysler 8" & 9.25" rear. Approx. 0.630" long.
Item #: FDHC-YSPCS-011
Condition:
New
Price: $10.89
Description: Crush sleeve eliminator kit for GM 8.5" & Chrysler 9.25"
Item #: FDHC-SK CSGM8.5
Condition:
New
Price: $50.89
Description: Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Item #: FDHC-YPKD44-PC-T/L
Condition:
New
Price: $129.89
Description: Differential carrier side bearing screw adjuster for Chrysler 7.25" and 8.25".
Item #: FDHC-YSPSA-002
Condition:
New
Price: $47.89
Description: Differential side bearing screw adjuster for 9.25" Chrysler.
Item #: FDHC-YSPSA-001
Condition:
New
Price: $42.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-276
Condition:
New
Price: $499.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-321
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-321
Condition:
New
Price: $513.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-355
Condition:
New
Price: $658.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-390
Condition:
New
Price: $525.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-411
Condition:
New
Price: $658.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-456
Condition:
New
Price: $514.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C9.25-488
Condition:
New
Price: $514.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-307
Condition:
New
Price: $556.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-355
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-390
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-411
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-488
Condition:
New
Price: $517.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-373
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-456
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-307
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-355
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-373
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-411
Condition:
New
Price: $302.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-456
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-488
Condition:
New
Price: $394.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-513
Condition:
New
Price: $394.89
Description: Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226.
Item #: FDHC-YSPCG-003
Condition:
New
Price: $11.89
Description: Model 35 (standard Open & TracLoc) 8.25" Chrysler TracLoc cross pin bolt.
Item #: FDHC-YSPBLT-048
Condition:
New
Price: $14.89
Description: Replacement oil baffle for Model 35 IFS front, Dana 25, 27, 30, 44 IFS & disconnect and Dana 50.
Item #: FDHC-YSPBF-003
Condition:
New
Price: $7.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25", 10.5" & some 9.75". 7/8-20 thread, 1 1/8 socket
Item #: FDHC-YSPPN-012
Condition:
New
Price: $12.89
Description: Pinion nut for Chrysler 7.25", 8.0" IFS, 8.25", 8.75" fine spline, 9.25" front & rear, 7/16" x 14.
Item #: FDHC-YSPPN-008
Condition:
New
Price: $9.89
Description: Replacement redi-sleeve yoke saver for 8.75" c, 9.25" c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Item #: FDHC-YMS99187
Condition:
New
Price: $31.89
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement outer stub dust shield for Dana 30, Dana 44 & Model 35
Item #: FDHC-YSPBF-016
Condition:
New
Price: $8.89
Description: Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8" x 24.
Item #: FDHC-YSPBLT-008
Condition:
New
Price: $10.89
Description: Ring gear bolt for Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS front. 3/8" x 24.
Item #: FDHC-YSPBLT-005
Condition:
New
Price: $8.89
Description: Ring gear bolt for Chrysler 9.25" rear, 7/16" x 18.
Item #: FDHC-YSPBLT-003
Condition:
New
Price: $8.89
Description: Rubber fill plug for Chrysler
Item #: FDHC-YSPFP-03
Condition:
New
Price: $30.89