- Home »
- Catalog
Complete Offroad » 1999, Ford, Explorer
Products for:
- Year: 1999
- Make: Ford
- Model: Explorer
View Universal items for: 1999 Ford Explorer
Browse Products
Description: 8.8" Ford TracLoc (with short ears--for late models only) clutch set, both sides.
Item #: FDHC-YPKF8.8-PC-L
Condition:
New
Price: $228.89
Description: 8.8" Ford Yukon Dura Grip Limited Slip, 31 Spline Positraction Composite Clutches
Item #: FDHC-YDGF8.8-31-1
Condition:
New
Price: $820.89
Description: ABS carrier case exciter ring (tone ring) with 108 teeth for 8.8" Ford.
Item #: FDHC-YSPABS-017
Condition:
New
Price: $143.89
Description: Axle ABS tone ring for '03 & up Crown Victoria, 3.6" diameter, 35 teeth
Item #: FDHC-YSPABS-026
Condition:
New
Price: $27.89
Description: Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Item #: FDHC-YMS8835S
Condition:
New
Price: $10.89
Description: AXLE STUD , 58MM X M14-2.0 .
Item #: FDHC-YSPSTUD-033
Condition:
New
Price: $8.89
Description: Axle stud, 1/2" x 2", screw in design
Item #: FDHC-YSPSTUD-036
Condition:
New
Price: $7.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for AMC Model 35 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK M35
Condition:
New
Price: $103.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8" differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK F8.8
Condition:
New
Price: $123.89
Description: Chrome cover for 8.8" Ford.
Item #: FDHC-YP C1-F8.8
Condition:
New
Price: $65.89
Description: Cover bolt for Ford 7.5", 8.8" & 9.75"
Item #: FDHC-YSPBLT-079
Condition:
New
Price: $7.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft (0.875") for '86 and newer 8.8" Ford.
Item #: FDHC-YSPXP-026
Condition:
New
Price: $42.89
Description: Crush Sleeve for Model 20, Ford 10.25", 10.5", 7.5", 8.8", 9 3/8", 9" & 9.75". .480" long.
Item #: FDHC-YSPCS-002
Condition:
New
Price: $10.89
Description: Crush Sleeve for Model 35, Chrysler 7.25", 8.25" Ford 8" & GM 7.75". Approx. 0.480" long.
Item #: FDHC-YSPCS-010
Condition:
New
Price: $8.89
Description: 2 piece solid spacer for Ford 8.8 and 7.5.
Item #: FDHC-SK CSF8.8
Condition:
New
Price: $83.89
Description: Ford 7.5" & 8.8" ring gear bolt, standard Open & TracLoc. 7/16" x 20.
Item #: FDHC-YSPBLT-024
Condition:
New
Price: $7.89
Description: Ford 7.5", 8", 8.8", & 9" axle stud.
Item #: FDHC-YSPSTUD-005
Condition:
New
Price: $7.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-308
Condition:
New
Price: $427.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-327
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-331
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-355
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-373
Condition:
New
Price: $406.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-411
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-430
Condition:
New
Price: $501.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-456
Condition:
New
Price: $464.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-488
Condition:
New
Price: $476.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-513
Condition:
New
Price: $476.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-571
Condition:
New
Price: $620.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-307
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-355
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-373
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-411
Condition:
New
Price: $302.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-456
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-488
Condition:
New
Price: $394.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35-513
Condition:
New
Price: $394.89
Description: Main Cap stud kit for Ford 7.5", 8.8", 9", 10.25", Dana 44, 60, and 70.
Item #: FDHC-YP TA-1816
Condition:
New
Price: $145.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSF8.8-31
Condition:
New
Price: $241.89
Description: Replacement oil baffle for Model 35 IFS front, Dana 25, 27, 30, 44 IFS & disconnect and Dana 50.
Item #: FDHC-YSPBF-003
Condition:
New
Price: $7.89
Description: Replacement outer oil slinger for Ford 7.5", 8.8", 9", 10.25", Nissan M226 Rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Item #: FDHC-YSPBF-023
Condition:
New
Price: $10.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion gear thrust washer (0.750" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-027
Condition:
New
Price: $11.89
Description: Pinion gear thrust washer (0.875" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-029
Condition:
New
Price: $14.89
Description: Pinion nut for Ford 7.5", 8", 8.8", 9 3/8" & 9". 1 1/6" socket, 3/4" x 20 thread.
Item #: FDHC-YSPPN-020
Condition:
New
Price: $10.89
Description: Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25", 10.5" & some 9.75". 7/8-20 thread, 1 1/8 socket
Item #: FDHC-YSPPN-012
Condition:
New
Price: $12.89
Description: Pinion seal for 7.5", 8.8", and 9.75" Ford, and also 1985-'86 9" Ford. Yukon Mighty seal.
Item #: FDHC-YMS3604
Condition:
New
Price: $11.89
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement outer stub dust shield for Dana 30, Dana 44 & Model 35
Item #: FDHC-YSPBF-016
Condition:
New
Price: $8.89
Description: Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8" x 24.
Item #: FDHC-YSPBLT-008
Condition:
New
Price: $10.89
Description: Side gear thrust washer (0.750" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-028
Condition:
New
Price: $8.89
Description: Side gear thrust washer (0.875" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-030
Condition:
New
Price: $14.89
Description: Standard open cross pin shaft (.750") for Ford 8", 8.8", 9" and Model 20.
Item #: FDHC-YSPXP-027
Condition:
New
Price: $17.89
Description: Steel cover for Ford 8.8"
Item #: FDHC-YP C5-F8.8-S
Condition:
New
Price: $85.89
Description: Super Carrier Shim kit for Ford 8.8", GM 12 bolt car & truck, 8.6 & Vette
Item #: FDHC-SK SS12
Condition:
New
Price: $42.89
Description: Trac-Loc spring for Ford 8.8", 31 spline
Item #: FDHC-YSPSPR-005
Condition:
New
Price: $44.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLF8.8-31
Condition:
New
Price: $1,099.89
Description: Yukon Hardcore Nodular Iron Cover for 8.8" Ford. High strength steel fasteners Two fill plug heights Fits Std & Reverse rotation
Item #: FDHC-YHCC-F8.8
Condition:
New
Price: $242.89