- Home »
- Catalog
Complete Offroad » 1999, Ford, F-350 Super Duty 1 Ton
Products for:
- Year: 1999
- Make: Ford
- Model: F-350 Super Duty 1 Ton
View Universal items for: 1999 Ford F-350 Super Duty 1 Ton
Browse Products
Description: Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Item #: FDHC-YSPSR-005
Condition:
New
Price: $9.89
Description: Replacement pinion nut washer for Dana 44 JK, 60, 70U, '08 & newer Ford 10.5" & Nissan Titan rear.
Item #: FDHC-YSPPN-030
Condition:
New
Price: $7.89
Description: Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225" DIA, for X/P shaft, 1.87" LNG.
Item #: FDHC-YSPXP-022
Condition:
New
Price: $11.89
Description: Dana 50, Fits all Gear Ratio Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD50-30-1
Condition:
New
Price: $834.89
Description: Dana 60 & Dana 61 TracLoc clutch set.
Item #: FDHC-YPKD60-PC-T/L
Condition:
New
Price: $291.89
Description: Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).
Item #: FDHC-YPKD60-PC-P/L
Condition:
New
Price: $189.89
Description: Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Item #: FDHC-YSPXP-010
Condition:
New
Price: $178.89
Description: Dana 60 Drive Flange Cap, Yukon Engraved
Item #: FDHC-YP DFC-LG-Y
Condition:
New
Price: $148.89
Description: Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75" Chrysler STD) Dana 70 2PC.
Item #: FDHC-YSPTW-017
Condition:
New
Price: $9.89
Description: 3/8" cover bolt, Dana 60, Dana 70 & Dana 80.
Item #: FDHC-YSPBLT-053
Condition:
New
Price: $8.89
Description: Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Item #: FDHC-YY STR-003
Condition:
New
Price: $31.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $21.89
Description: Dana 70 & Dana 80 pinion gear Thrust washer.
Item #: FDHC-YSPTW-018
Condition:
New
Price: $11.89
Description: Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Item #: FDHC-YSPXP-019
Condition:
New
Price: $69.89
Description: Dana 80 ABS exciter tone ring.
Item #: FDHC-YSPABS-008
Condition:
New
Not Available
Price: $176.89
Description: Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).
Item #: FDHC-YPKD80-PC-T/L
Condition:
New
Price: $496.89
Description: Drive Flange Cap for Dana 60
Item #: FDHC-YP DFC-LG-B
Condition:
New
Price: $148.89
Description: Finned aluminum cover for Dana 80
Item #: FDHC-YP C5-D80-A
Condition:
New
Price: $233.89
Description: Finned aluminum cover for Ford 10.5", '08 & Up
Item #: FDHC-YP C5-F10.5
Condition:
New
Price: $171.89
Description: 10.25" & 10.5" cover gasket.
Item #: FDHC-YCGF10.25
Condition:
New
Price: $16.89
Description: Ford 10.25" C/clip.
Item #: FDHC-YSPCC-005
Condition:
New
Price: $26.89
Description: Full floating axle seal for 10.25" Ford. Yukon Mighty seal.
Item #: FDHC-YMS370047A
Condition:
New
Price: $82.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-354
Condition:
New
Price: $892.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-373
Condition:
New
Price: $868.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-411
Condition:
New
Price: $642.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-456
Condition:
New
Price: $642.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-456T
Condition:
New
Price: $743.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-488
Condition:
New
Price: $642.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-513
Condition:
New
Price: $642.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-717
Condition:
New
Price: $831.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-331
Condition:
New
Price: $1,071.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-354
Condition:
New
Price: $737.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-373
Condition:
New
Price: $537.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-411
Condition:
New
Price: $833.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-430
Condition:
New
Price: $619.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-463
Condition:
New
Price: $553.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-488
Condition:
New
Price: $638.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-513
Condition:
New
Price: $638.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-538
Condition:
New
Price: $638.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.5-355-31
Condition:
New
Price: $470.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.5-373-31
Condition:
New
Price: $542.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.5-411-31
Condition:
New
Price: $544.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.5-430-31
Condition:
New
Price: $544.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.5-456-31
Condition:
New
Price: $480.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.5-488-31
Condition:
New
Price: $480.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-373-4
Condition:
New
Price: $596.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D80-411T
Condition:
New
Price: $474.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-355L
Condition:
New
Price: $485.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-373L
Condition:
New
Long yoke required on 92 and older applications
Price: $548.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-411L
Condition:
New
Long yoke required on 92 and older applications
Price: $548.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-430L
Condition:
New
Long yoke required on 92 and older applications
Price: $569.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-456L
Condition:
New
Long yoke required on 92 and older applications
Price: $569.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-488L
Condition:
New
Long yoke required on 92 and older applications
Price: $470.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-513L
Condition:
New
Long yoke required on 92 and older applications
Price: $527.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-538L
Condition:
New
Long yoke required on 92 and older applications
Price: $548.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D50R-373R
Condition:
New
Price: $470.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D50R-411R
Condition:
New
Price: $475.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D50R-430R
Condition:
New
Price: $475.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D50R-456R
Condition:
New
Price: $454.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D50R-488R
Condition:
New
Price: $454.89