- Home »
- Catalog
Complete Offroad » 1971, Chevrolet, K10 Pickup
Products for:
- Year: 1971
- Make: Chevrolet
- Model: K10 Pickup
View Universal items for: 1971 Chevrolet K10 Pickup
Browse Products
Description: Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Item #: FDHC-YSPSR-005
Condition:
New
Price: $8.89
Yukon Gear and Axle Dana 30 & Dana 44 Power Lok bolt, left h&, & 8.75" Chrysler & 55P.. - YSPBLT-052
Description: Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75" Chrysler & 55P.
Item #: FDHC-YSPBLT-052
Condition:
New
Price: $31.89
Description: Dana 30 & Dana 44 roll PIN, 0.235" DIA, for cross pin shaft.
Item #: FDHC-YSPXP-007
Condition:
New
Price: $9.89
Description: Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Item #: FDHC-YPKD44-PC-T/L
Condition:
New
Price: $129.89
Description: Dana 44 3.73 & Down Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-3-30-1
Condition:
New
Price: $820.89
Description: Dana 44 3.92 & Up Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-4-30-1
Condition:
New
Price: $819.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D44
Condition:
New
Price: $127.89
Description: Replacement complete shim kit for Dana 44
Item #: FDHC-SK 706376
Condition:
New
Price: $50.89
Description: Replacement cover gasket. For Dana 44
Item #: FDHC-YCGD44
Condition:
New
Price: $12.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-4-30
Condition:
New
Price: $966.89
Description: Replacement pinion nut washer for Dana 44 JK, 60, 70U, '08 & newer Ford 10.5" & Nissan Titan rear.
Item #: FDHC-YSPPN-030
Condition:
New
Price: $6.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D44-REAR
Condition:
New
Price: $359.89
Description: Dana 44 pinion gear standard Open.
Item #: FDHC-YPKD44-PG-01
Condition:
New
Price: $51.89
Description: Dana 44, GM55P & 8.2" GM pinion gear Thrust washer.
Item #: FDHC-YSPTW-011
Condition:
New
Price: $7.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD44-S-30
Condition:
New
Price: $208.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP FSD44-3-30DN
Condition:
New
Price: $369.89
NEW!
Description: 1310 U-bolts, 5/16" x 1-3/8" Dana 30, Dana 44, 8.2", 12P, 12T, VET, Model 20.
Item #: FDHC-YY UB-002
Condition:
New
Price: $29.89
Description: Replacement side gear thrust washer for Dana 44, Model 20, and Ford 8" & 9"
Item #: FDHC-YSPTW-013
Condition:
New
Price: $6.89
Description: Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225" DIA, for X/P shaft, 1.87" LNG.
Item #: FDHC-YSPXP-022
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 61 TracLoc clutch set.
Item #: FDHC-YPKD60-PC-T/L
Condition:
New
Price: $264.89
Description: Dana 60 & Dana 70 Power Lok case bolt.
Item #: FDHC-YSPBLT-054
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).
Item #: FDHC-YPKD60-PC-P/L
Condition:
New
Price: $172.89
Description: Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Item #: FDHC-YSPXP-010
Condition:
New
Price: $162.89
NEW!
Description: Dana 60 4.10 & Down Yukon Dura Grip Positraction, Narrow, 30 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-3-30
Condition:
New
Price: $968.89
NEW!
Description: Dana 60 4.10 & Down Yukon Dura Grip Positraction, Narrow, 35 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-3-35
Condition:
New
Price: $968.89
NEW!
Description: Dana 60 4.56 & Up Yukon Dura Grip Positraction, Narrow, 30 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-4-30
Condition:
New
Price: $968.89
NEW!
Description: Dana 60 4.56 & Up Yukon Dura Grip Positraction, Narrow, 35 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-4-35
Condition:
New
Price: $985.89
Description: Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75" Chrysler STD) Dana 70 2PC.
Item #: FDHC-YSPTW-017
Condition:
New
Price: $8.89
Description: 3/8" cover bolt, Dana 60, Dana 70 & Dana 80.
Item #: FDHC-YSPBLT-053
Condition:
New
Price: $7.89
Description: Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Item #: FDHC-YY STR-003
Condition:
New
Price: $28.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $19.89
Description: Drive Flange Cap for Dana 44
Item #: FDHC-YP DFC-SM-B
Condition:
New
Price: $109.89
Description: Drive Flange Cap for Dana 44, Yukon Engraved
Item #: FDHC-YP DFC-SM-Y
Condition:
New
Price: $109.89
Description: Drive flange, 19 spline inner, 48 spline outer.
Item #: FDHC-YHCDF-19-A
Condition:
New
Price: $121.89
Description: 12T cover gasket.
Item #: FDHC-YCGGM12T
Condition:
New
Price: $12.89
Description: GM 12 bolt truck crush sleeve, 2.350" long.
Item #: FDHC-YSPCS-022
Condition:
New
Price: $12.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-354
Condition:
New
Price: $680.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-373
Condition:
New
Price: $660.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60V-409
Condition:
New
Price: $1,033.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-411
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-430
Condition:
New
Price: $561.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-456
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-488
Condition:
New
Price: $492.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-513
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-538
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-586
Condition:
New
Price: $568.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-617
Condition:
New
Price: $558.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-717
Condition:
New
Price: $611.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-456T
Condition:
New
Price: $470.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-488T
Condition:
New
Price: $470.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-513T
Condition:
New
Price: $469.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-538T
Condition:
New
Price: $585.89
Description: Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226.
Item #: FDHC-YSPCG-003
Condition:
New
Price: $11.89
NEW!
Description: Main Cap Stud kit for GM 7.5", 7.625", 8.5", 8.6", 12 bolt passenger car & truck
Item #: FDHC-YP TA-1815
Condition:
New
Price: $111.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSD44-30
Condition:
New
Price: $188.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSGM12-30
Condition:
New
Price: $252.89
Description: Notched cross pin shaft for 12P and 12T GM. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Item #: FDHC-YSPXP-053
Condition:
New
Please Call for Availability
Description: O-ring for Dana 60 ZIP locker seal housing
Item #: FDHC-YZLAO-03
Condition:
New
Price: $11.89
Description: O-ring for Toyota & Dana 44 ZIP locker seal housing
Item #: FDHC-YZLAO-01
Condition:
New
Price: $11.89
Description: Outer stub thrust washer for Dana 30 & 44
Item #: FDHC-YSPTW-075
Condition:
New
Price: $10.89