- Home »
- Catalog
Complete Offroad » 1965, GMC, K15/ K1500 1/2 Ton (4WD)
Products for:
- Year: 1965
- Make: GMC
- Model: K15/ K1500 1/2 Ton (4WD)
View Universal items for: 1965 GMC K15/ K1500 1/2 Ton (4WD)
Browse Products
Description: Dana 44 3.73 & Down Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-3-30-1
Condition:
New
Price: $820.89
Description: Dana 44 3.92 & Up Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-4-30-1
Condition:
New
Price: $819.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D44
Condition:
New
Price: $127.89
Description: Replacement complete shim kit for Dana 44
Item #: FDHC-SK 706376
Condition:
New
Price: $50.89
Description: Replacement cover gasket. For Dana 44
Item #: FDHC-YCGD44
Condition:
New
Price: $12.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-4-30
Condition:
New
Price: $966.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D44-REAR
Condition:
New
Price: $359.89
Description: Dana 44 pinion gear standard Open.
Item #: FDHC-YPKD44-PG-01
Condition:
New
Price: $51.89
Description: Dana 44, GM55P & 8.2" GM pinion gear Thrust washer.
Item #: FDHC-YSPTW-011
Condition:
New
Price: $7.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD44-S-30
Condition:
New
Price: $208.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP FSD44-3-30DN
Condition:
New
Price: $369.89
Description: Replacement side gear thrust washer for Dana 44, Model 20, and Ford 8" & 9"
Item #: FDHC-YSPTW-013
Condition:
New
Price: $6.89
Description: Drive Flange Cap for Dana 44
Item #: FDHC-YP DFC-SM-B
Condition:
New
Price: $109.89
Description: Drive Flange Cap for Dana 44, Yukon Engraved
Item #: FDHC-YP DFC-SM-Y
Condition:
New
Price: $109.89
Description: Drive flange, 19 spline inner, 48 spline outer.
Item #: FDHC-YHCDF-19-A
Condition:
New
Price: $121.89
Description: 12T cover gasket.
Item #: FDHC-YCGGM12T
Condition:
New
Price: $12.89
Description: GM 12 bolt truck crush sleeve, 2.350" long.
Item #: FDHC-YSPCS-022
Condition:
New
Price: $12.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-411T
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-456
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-538
Condition:
New
Price: $479.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-589
Condition:
New
Price: $432.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-373T
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-411T
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-456T
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-342
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-373
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-411
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-456
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-488
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-513
Condition:
New
Price: $476.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12T-308
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-308
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-331
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-354
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-373
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-392
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-411
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-456T
Condition:
New
Price: $479.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-513
Condition:
New
Price: $432.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-488
Condition:
New
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-488T
Condition:
New
Price: $363.89
Description: Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226.
Item #: FDHC-YSPCG-003
Condition:
New
Price: $11.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSD44-30
Condition:
New
Price: $188.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSGM12-30
Condition:
New
Price: $252.89
Description: Model 35 axle ABS ring ONLY 3.5", 54 tooth.
Item #: FDHC-YSPABS-014
Condition:
New
Price: $62.89
Description: Notched cross pin shaft for 12P and 12T GM. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Item #: FDHC-YSPXP-053
Condition:
New
Please Call for Availability
Description: O-ring for Toyota & Dana 44 ZIP locker seal housing
Item #: FDHC-YZLAO-01
Condition:
New
Price: $11.89
Description: O-ring for Yukon Zip Locker Bulkhead fitting kit
Item #: FDHC-YZLAO-05
Condition:
New
Price: $12.89
Description: Outer stub thrust washer for Dana 30 & 44
Item #: FDHC-YSPTW-075
Condition:
New
Price: $10.89
Description: 8" Toyota, 7.5" GM, 8.2" GM, 12T, pinion shim set, & Mazda truck.
Item #: FDHC-SK T8
Condition:
New
Price: $31.89
Description: Pinion depth shims for 7.5" GM, 7.75" GM, 8.2" GM, 12T, & other
Item #: FDHC-SK 21104
Condition:
New
Price: $24.89
Description: Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2", 8.2" Buick/Old's/Pontiac & 63-79 Corvette. 1 1/8" socket, 7/8" x 16 thread.
Item #: FDHC-YSPPN-016
Condition:
New
Price: $10.89
Description: Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2" & 63-79 Corvette.
Item #: FDHC-YSPPN-032
Condition:
New
Price: $26.89
Description: Polished aluminum cover for 12T GM.
Item #: FDHC-YP C2-GM12T
Condition:
New
Price: $310.89
Description: Positraction cross pin bolt for GM 12P and 12T.
Item #: FDHC-YSPBLT-065
Condition:
New
Price: $40.89
Description: Positraction pinion gear thrust washer with step-lip inside for GM 12P and 12T. fits new Eaton's.
Item #: FDHC-YSPTW-044
Condition:
New
Please Call for Availability
Description: Power Lok Belleville clutch plate, splined
Item #: FDHC-YPKD44-PC-04
Condition:
New
Price: $31.89
Description: Power Lok drive Belleville plate for Dana 44
Item #: FDHC-YPKD44-PC-01
Condition:
New
Price: $37.89
Description: Power Lok flat drive plate for Dana 44
Item #: FDHC-YPKD44-PC-02
Condition:
New
Price: $25.89
Description: Power Lok flat driven plate for Dana 44
Item #: FDHC-YPKD44-PC-03
Condition:
New
Price: $25.89