- Home »
- Catalog
Complete Offroad » 1962
Products for:
- Year: 1962
View Universal items for: 1962
Browse Products
Description: 8" Ford Yukon Trac-Loc with 31 Spline Limited Slip Smooth Design for Street/Everyday Use - 2 Preload Springs 4 Pinion Design
Item #: FDHC-YDGF8-31-SM
Condition:
New
Price: $908.89
Description: 8" Ford Yukon Trac-Loc with 31 Spline Limited Slip Aggressive Design - 4 Preload Springs 4 Pinion Design
Item #: FDHC-YDGF8-31-AG
Condition:
New
Price: $908.89
Description: 8.25" Chrysler 2.56 & Up Ratio Yukon Dura Grip Limited Slip, 27 Spline, Positraction Composite Clutches
Item #: FDHC-YDGC8.25-27-1
Condition:
New
Price: $782.89
Description: 8.25" Chrysler cover gasket.
Item #: FDHC-YCGC8.25
Condition:
New
Price: $14.89
Description: 8.25" Chrysler notched cross pin shaft for standard open carriers. (0.801" diameter). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers, or with factory Trac Loc positractions.
Item #: FDHC-YSPXP-058
Condition:
New
Price: $97.89
Description: 8.25" Chrysler pinion gear thrust washer.
Item #: FDHC-YSPTW-002
Condition:
New
Price: $26.89
Description: 8.25" Chrysler, Model 35, D36 ICA, & Dana 28 TracLoc clutch set.
Item #: FDHC-YPKC8.25-PC-T/L
Condition:
New
Price: $194.89
Description: 8.75" Chrysler & 55P Chevy Power Lok clutches, Model 20 also, POSI.
Item #: FDHC-YPKC8.75-PC
Condition:
New
Price: $285.89
Description: 8.75" Chrysler gasket.
Item #: FDHC-YCGC8.75
Condition:
New
Price: $14.89
Description: 8.75" Chrysler inner axle seal, use w/set7.Yukon Mighty seal.
Item #: FDHC-YMS8695S
Condition:
New
Price: $11.89
Description: 8.75" Chrysler outer axle seal, use w/set7.Yukon Mighty seal.
Item #: FDHC-YMS8704S
Condition:
New
Price: $20.89
Description: 9" Ford gasket.
Item #: FDHC-YCGF9
Condition:
New
Price: $14.89
Description: 9" Ford HD 6061 aluminum pinion support, Daytona, PLAIN-SILVER, NO races.
Item #: FDHC-YP F9PS-1-CLEAR-BARE
Condition:
New
Price: $240.89
Description: 9" Ford pinion nut, 35 spline Large pinion oversize.
Item #: FDHC-YSPPN-027
Condition:
New
Price: $33.89
Description: 9" Ford standard Open & Detroit locker ring gear bolt for Safety wire. 12 point 5/8" head, .950" long.
Item #: FDHC-YSPBLT-026
Condition:
New
Price: $19.89
Description: 9" Ford Yukon Trac-Loc with 28 Spline Limited Slip Aggressive Design - 4 Preload Springs 4 Pinion Design
Item #: FDHC-YDGF9-28-AG
Condition:
New
Price: $908.89
Description: 9" Ford Yukon Trac-Loc with 28 Spline Limited Slip Smooth Design for Street/Everyday Use - 2 Preload Springs 4 Pinion Design
Item #: FDHC-YDGF9-28-SM
Condition:
New
Price: $908.89
Description: 9" Ford Yukon Trac-Loc with 31 Spline Limited Slip Aggressive Design - 4 Preload Springs 4 Pinion Design
Item #: FDHC-YDGF9-31-AG
Condition:
New
Price: $906.89
Description: 9" Ford Yukon Trac-Loc with 31 Spline Limited Slip Smooth Design for Street/Everyday Use - 2 Preload Springs 4 Pinion Design
Item #: FDHC-YDGF9-31-SM
Condition:
New
Price: $908.89
Description: 9" Ford yoke spacer (to use Daytona or race yoke with standard Open style support).
Item #: FDHC-YY F9-SPACER
Condition:
New
Price: $24.89
Description: 9" Yukon 3.250" aluminum case, HD Drop Out housing, with load bolt. Made from A356-T6 aluminum & featuring a through bolt design, this dropout is rated for up to 1400 horsepower!
Item #: FDHC-YP DOF9-5-325
Condition:
New
Price: $939.89
Description: Adaptor washer for 28 spline pinion in oversize support, for 9" Ford.
Item #: FDHC-YP N1926D
Condition:
New
Price: $66.89
Description: Adjuster lock bolt 3.062" & 3.250" Yukon Ford 9" Drop Out.
Item #: FDHC-YP DOF9-10
Condition:
New
Price: $7.89
Description: Air line repair kit, ZIP locker.
Item #: FDHC-YZLAL-KIT
Condition:
New
Price: $53.89
Description: Aluminum Girdle replacement cover for Dana 44 TA HD.
Item #: FDHC-YP C3-D44-STD
Condition:
New
Price: $410.89
Description: Axle bearing retainer for Dana 44 rear
Item #: FDHC-YSPRET-012
Condition:
New
Price: $29.89
Description: Axle bearing retainer for Dana 44 rear in Jeep TJ
Item #: FDHC-YSPRET-013
Condition:
New
Price: $35.89
Description: Axle bearing retainer for Ford 9", large bearing, 1/2" bolt holes
Item #: FDHC-YSPRET-005
Condition:
New
Price: $66.89
Description: Axle bearing retainer for Ford 9", small bearing, 3/8" bolt holes
Item #: FDHC-YSPRET-006
Condition:
New
Price: $26.89
Description: Axle bearing retainer plate for Dana 44 TJ rear
Item #: FDHC-YSPRET-010
Condition:
New
Price: $19.89
Description: Axle bearing retainer plate for YA D75786-1X & YA D75786-2X
Item #: FDHC-YSPRET-008
Condition:
New
Price: $20.89
Description: Axle seal for '55 to '62 1/2 ton GM. Yukon Mighty seal.
Item #: FDHC-YMS414045
Condition:
New
Price: $124.89
Description: Axle spacer for Dana 44 19 spline & AMC Model 20. Standard & Trac Loc, not Power Lok
Item #: FDHC-YSPXP-061
Condition:
New
Price: $31.89
Description: Axle stud, 1/2" x 2", screw in design
Item #: FDHC-YSPSTUD-036
Condition:
New
Price: $8.89
Description: Restore the precise steering control of your vehicle by replacing its worn and failing ball joints with durable Yukon units. Yukon ball joints are constructed from high-quality materials and engineered to meet or exceed OE specs.
Item #: FDHC-YSPBJ-011
Condition:
New
Price: $129.89
Description: Bolt/screw for adjuster lock for Chrysler 7.25", 8.25", 8.75", 9.25".
Item #: FDHC-YSPBLT-051
Condition:
New
Price: $19.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $11.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D60
Condition:
New
Price: $205.89
Description: 55P Chevy Passenger Drop Out gasket.
Item #: FDHC-YCGGM55P
Condition:
New
Price: $16.89
Description: Chrome Moly cross pin shaft for Mini-Spool for 9" Ford HD.
Item #: FDHC-YP MINSXF9
Condition:
New
Price: $59.89
Description: Chrysler 8.75 "89" case Crush Sleeve. Approx. 3.000" long.
Item #: FDHC-YSPCS-009
Condition:
New
Price: $22.89
Description: 89 housing nodular Iron Drop Out case, up to 500 HP, Billet adjuster for 8.75" Chrysler. This dropout does not come with fill plug (Part number CHY612017).
Item #: FDHC-YP DOC8.89
Condition:
New
Price: $709.89
Description: Chrysler 8.75" (coarse spline) pinion nut washer.
Item #: FDHC-YSPPN-028
Condition:
New
Price: $15.89
Description: Chrysler 8.75" (coarse spline) pinion nut. 3/4" x 16.
Item #: FDHC-YSPPN-002
Condition:
New
Price: $10.89
Description: Dana 44, Dana 60, & 9.25" TracLoc clutch clip / guide
Item #: FDHC-YSPCG-001
Condition:
New
Price: $10.89
Description: Chrysler fine spline pinion nut for Chrysler 7.25", 8", 8.25", 8.75", and 9.25".
Item #: FDHC-YSPPN-038
Condition:
New
Price: $37.89
Description: CLAMPS, 3.062" Yukon Ford 9" Drop Out new design ONLY.
Item #: FDHC-YP DOF9-03
Condition:
New
Price: $15.89
Description: CLAMPS, 3.250" Yukon Ford 9" Drop Out new design ONLY.
Item #: FDHC-YP DOF9-04
Condition:
New
Price: $15.89
Description: Copper washer for Ford 9" & 8" dropout housing
Item #: FDHC-YP DOF9-11
Condition:
New
Price: $9.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $9.89
Description: Cross pin shaft for 8.25" Chrysler.
Item #: FDHC-YSPXP-003
Condition:
New
Price: $49.89
Description: Crush Sleeve for Model 20, Ford 10.25", 10.5", 7.5", 8.8", 9 3/8", 9" & 9.75". .480" long.
Item #: FDHC-YSPCS-002
Condition:
New
Price: $11.89
Description: Crush Sleeve for Model 35, Chrysler 7.25", 8.25" Ford 8" & GM 7.75". Approx. 0.480" long.
Item #: FDHC-YSPCS-010
Condition:
New
Price: $9.89
Description: Crush Sleeve for GM 55-62 car & truck and Toyota 8". 2.510" long.
Item #: FDHC-YSPCS-018
Condition:
New
Price: $16.89
Description: 8.75" Chrysler 89 solid crush sleeve replacement spacer, preload. This item is compatible with '89 case dropouts only.
Item #: FDHC-SK CSC8.75
Condition:
New
Price: $91.89
Description: 9" Ford 2 piece solid preload pinion spacer, Daytona or standard.
Item #: FDHC-SK CSF9-2PIECE
Condition:
New
Price: $77.89
Description: 9" large solid pinion preload spacer & shim kit for 35 spline pinion.
Item #: FDHC-SK CSF9-BIGPIN
Condition:
New
Price: $147.89
Description: 5/16"-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5", 7.625", 8.2", 8.5", 12 bolt passenger car and truck.
Item #: FDHC-YSPBLT-075
Condition:
New
Price: $7.89
Description: Replacement pinion seal for Dana 25, Dana 27, Dana 30, D36, Dana 44, & Dana 50 .Yukon Mighty seal.
Item #: FDHC-YMS5778
Condition:
New
Price: $20.89
Description: Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Item #: FDHC-YSPPN-029
Condition:
New
Price: $7.89