- Home »
- Catalog
Complete Offroad » 1953, Ford
Products for:
- Year: 1953
- Make: Ford
View Universal items for: 1953 Ford
Browse Products
Description: Replacement inner oil slinger for Dana 25, 27, 30, 44 & 50
Item #: FDHC-YSPBF-013
Condition:
New
Price: $7.89
Yukon Gear and Axle Dana 30 & Dana 44 Power Lok bolt, left h&, & 8.75" Chrysler & 55P.. - YSPBLT-052
Description: Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75" Chrysler & 55P.
Item #: FDHC-YSPBLT-052
Condition:
New
Price: $31.89
Description: Dana 30 & Dana 44 roll PIN, 0.235" DIA, for cross pin shaft.
Item #: FDHC-YSPXP-007
Condition:
New
Price: $9.89
Description: Dana 44 3.73 & Down Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-3-30-1
Condition:
New
Price: $820.89
Description: Dana 44 3.92 & Up Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-4-30-1
Condition:
New
Price: $819.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D44
Condition:
New
Price: $127.89
Description: Replacement cover gasket. For Dana 44
Item #: FDHC-YCGD44
Condition:
New
Price: $12.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-4-30
Condition:
New
Price: $966.89
Description: Dana 44 pinion gear standard Open.
Item #: FDHC-YPKD44-PG-01
Condition:
New
Price: $51.89
Description: Dana 44, GM55P & 8.2" GM pinion gear Thrust washer.
Item #: FDHC-YSPTW-011
Condition:
New
Price: $7.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD44-S-30
Condition:
New
Price: $208.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP FSD44-3-30DN
Condition:
New
Price: $369.89
Description: 1310 U-bolts, 5/16" x 1-3/8" Dana 30, Dana 44, 8.2", 12P, 12T, VET, Model 20.
Item #: FDHC-YY UB-002
Condition:
New
Price: $29.89
Description: Replacement side gear thrust washer for Dana 44, Model 20, and Ford 8" & 9"
Item #: FDHC-YSPTW-013
Condition:
New
Price: $6.89
Description: Drive Flange Cap for Dana 44
Item #: FDHC-YP DFC-SM-B
Condition:
New
Price: $109.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-411T
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-456
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-538
Condition:
New
Price: $479.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-589
Condition:
New
Price: $432.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-308
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-331
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-354
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-373
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-392
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-411
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-456T
Condition:
New
Price: $479.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-513
Condition:
New
Price: $432.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-488
Condition:
New
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-488T
Condition:
New
Price: $363.89
Description: Replacement Inner axle seal for Dana 44 with 19 spline axles and Dana 30 Volvo rear. Yukon Mighty seal.
Item #: FDHC-YMS40769S
Condition:
New
Price: $39.89
Description: O-ring for Yukon Zip Locker Bulkhead fitting kit
Item #: FDHC-YZLAO-05
Condition:
New
Price: $12.89
Description: Power Lok Belleville clutch plate, splined
Item #: FDHC-YPKD44-PC-04
Condition:
New
Price: $31.89
Description: Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Item #: FDHC-YMS99155
Condition:
New
Price: $166.89
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement carrier shim kit for Dana 30 & 44 with 19 spline axles
Item #: FDHC-SK 706087
Condition:
New
Price: $24.89
Description: 0.080" thick Chrome replacement cover for Dana 44.
Item #: FDHC-YP C1-D44-STD
Condition:
New
Price: $61.89
Description: Replacement clutch set for Dana 44 Power Lok, aggressive
Item #: FDHC-YPKD44-PC-AG
Condition:
New
Price: $229.89
Description: Replacement clutch set for Dana 44 Power Lok, smooth
Item #: FDHC-YPKD44-PC-SM
Condition:
New
Price: $176.89
Description: Replacement cross pin shaft for Dana 44, Standard Open
Item #: FDHC-YSPXP-013
Condition:
New
Price: $17.89
Description: Replacement floater roll pin for Dana 44 & 8.75" Chrysler Power Lok
Item #: FDHC-YSPXP-021
Condition:
New
Price: $9.89
Description: Replacement oil baffle for Dana 44
Item #: FDHC-YSPBF-001
Condition:
New
Price: $7.89
Description: Replacement outer oil slinger for Dana 25, 27, 30, 44 & 50
Item #: FDHC-YSPBF-012
Condition:
New
Price: $7.89
Description: Replacement pinion nut for Dana 25, 27, 30, 36, 44, 53 & GM 7.75"
Item #: FDHC-YSPPN-009
Condition:
New
Price: $7.89
Description: Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8" x 24.
Item #: FDHC-YSPBLT-008
Condition:
New
Price: $10.89
Description: Replacement side gear thrust washer for Dana 44, 19 spline
Item #: FDHC-YSPTW-010
Condition:
New
Price: $16.89
Description: Spindle bearing for Dana 44. This replaces Spicer part number 550759.
Item #: FDHC-YSPSP-020
Condition:
New
Price: $25.89
Description: Spindle bearing seal for Dana 30 & 44. This replaces Spicer part number 36361.
Item #: FDHC-YSPSP-009
Condition:
New
Price: $11.89
Description: Spindle nut for Dana 30 & Dana 44, .372" thick. This replaces Spicer part number 21588X.
Item #: FDHC-YSPSP-001
Condition:
New
Price: $22.89
Description: Wiper kit SMALL w/8 retaining bolts, Dana 25, Dana 27, Dana 30, & Dana 44.
Item #: FDHC-YP WK-001
Condition:
New
Price: $115.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-3-30
Condition:
New
Price: $999.89
Description: Yukon Hardcore Diff Covers are constructed from thick-walled, high-strength nodular steel to protect lockers, gears and axles from the most extreme hits in off road driving.
Item #: FDHC-YHCC-D44
Condition:
New
Price: $268.89
Description: Yukon Hardcore Locking Hubs feature Chromoly internals and all steel construction for ultimate durability & strength. These hubs won’t disengage under high torque applications and default to the locked position in use.
Item #: FDHC-YHC70005
Condition:
New
Price: $581.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
Description: Geared for the installer, this quality Yukon kit is a true time-saver. It includes a carrier bearing puller, axle bearing puller, housing spreader, and a highly effective Yukon Multi-Shim Driver (YT SD-01).
Item #: FDHC-YT KIT-1
Condition:
New
Price: $2,460.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D44-19
Condition:
New
Price: $458.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK D44-19
Condition:
New
Price: $133.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK D44-19
Condition:
New
Price: $242.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD44-P/L-30
Condition:
New
Price: $487.89