- Home »
- Catalog
Complete Offroad » 1978, Jeep, Wagoneer
Products for:
- Year: 1978
- Make: Jeep
- Model: Wagoneer
View Universal items for: 1978 Jeep Wagoneer
Browse Products
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD44
Condition:
New
Please Call for Availability
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK D44-REAR
Condition:
New
Price: $234.89
NEW!
Description: The Spartan Locker is a lunchbox locker that delivers reliable, 100% lockup traction at a low cost. It's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap!
Item #: FDHD-SL D44-30
Condition:
New
Price: $624.89
Description: The Spartan Locker delivers reliable, 100% lockup traction at a low cost. This heavy-duty cross pin shaft is engineered and manufactured to the highest standards. Measures .748" outside diameter.
Item #: FDHD-SL XP-D44
Condition:
New
Please Call for Availability
NEW!
Description: Spartan Lockers deliver reliable, 100% lockup traction at a low cost. This Spartan Locker Spring & Pin Kit includes springs, alignment pins, and retainer wires.
Item #: FDHD-SL SPRING-SM
Condition:
New
Price: $23.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W39461
Condition:
New
Price: $238.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD44-REAR
Condition:
New
Price: $171.89
Description: Fits 1988 Jeep Cherokee, Commanche & Wagoneer front with four cylinder engine, Aisen four or five speed manual transmission, 231 transfer case & 3.55 or 4.11 gear ratio. 25 3/4" long from center of u/joint caps.
Item #: FDHD-ZDS9436
Condition:
New
Price: $420.67
Description: Fits '80-'93 Jeep Cherokee, Wagoneer, J10 & J20 front with eight cylinder engine & automatic transmission. 25 3/4" long from center of u/joint caps.
Item #: FDHD-ZDS9436A
Condition:
New
Price: $360.73
Description: Fits 1988 Jeep Cherokee, Commanche & Wagoneer front with six cylinder engine, automatic transmission, 242 or 231 transfer case & 3.08 gear ratio. 29 1/4" long from center of u/joint caps.
Item #: FDHD-ZDS9438
Condition:
New
Price: $420.67
Description: Fits '82-'83 Jeep Cherokee, Wagoneer, J10 & J20 front with six cylinder engine & five speed manual transmission. 29 1/4" long from center of u/joint caps.
Item #: FDHD-ZDS9438A
Condition:
New
Price: $360.73
Description: Fits '82-'83 Jeep Cherokee, Wagoneer, J10 & J20 front with six cylinder engine & automatic transmission. 29 1/4" long from center of u/joint caps.
Item #: FDHD-ZDS9438B
Condition:
New
Price: $360.73
Description: Fits '85-'86 Jeep Grand Cherokee front with four or five speed transmission. 25 1/16" long from center of u/joint caps.
Item #: FDHD-ZDS9749
Condition:
New
Price: $413.72
Description: Fits '78-'79 Jeep Wagoneer front with V8 engine & four speed hydramatic transmission. 25 5/16" long from center of u/joint caps.
Item #: FDHD-ZDS9751A
Condition:
New
Price: $354.77
Description: Fits '90-'94 Jeep Cherokee, Commanche & Wagoneer Dana 44 front with 4.0L engine, Aisen five speed manual transmission & Kanda transfer case. 27 1/16" long from center of u/joint caps.
Item #: FDHD-ZDS9752A
Condition:
New
Price: $354.77
Description: Fits 1979 Jeep Wagoneer, J10 & J20 front with V8 engine & three speed transmission. 20" long from center of u/joint caps.
Item #: FDHD-ZDS9754A
Condition:
New
Price: $354.77
Description: Fits '74-'77 Jeep Cherokee, Wagoneer, J10 & J20 front with six or eight cylinder engine, four speed automatic transmission & Quadratrac. 24 3/8" long from center of u/joint caps.
Item #: FDHD-ZDS9755
Condition:
New
Price: $413.72
Description: Fits '78-'79 Jeep Wagoneer, J10 & J20 front with six speed engine & four speed automatic transmission. 29" long from center of u/joint caps.
Item #: FDHD-ZDS9756A
Condition:
New
Price: $354.77
Description: Fits '90-'94 Jeep Cherokee, Commanche & Wagoneer Dana 44 front with 4.0L front with Aisen five speed automatic transmission case & Kanda transfer case. 28 3/4" long from center of u/joint caps.
Item #: FDHD-ZDS9764A
Condition:
New
Price: $354.77
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24138
Condition:
New
Price: $899.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24142
Condition:
New
Price: $870.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24146
Condition:
New
Price: $947.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24140
Condition:
New
Price: $1,347.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24144
Condition:
New
Price: $1,399.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24148
Condition:
New
Price: $1,293.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W39459
Condition:
New
Price: $165.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W39339
Condition:
New
Price: $299.89
Description: 4340 Chrome Moly replacement axle for Dana 44, Scout & Wagoneer D44, RH Inner, uses 5-760X u/joint. 14.78" long, 30 spline.
Item #: FDHD-ZA W38808
Condition:
New
Price: $184.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W38815
Condition:
New
Price: $193.89
Description: USA Standard Gear open spider gear set for Dana Spicer 44, 30 spline
Item #: FDHD-ZIKD44-S-30
Condition:
New
Price: $182.89
NEW!
Description: T14 M/T BEARING KIT 67-75 3SPD .
Item #: FDHD-ZMBK120
Condition:
New
Price: $199.89
NEW!
Description: T14 M/T BEARING KIT 67-75 3SPD , W/SYNCHROS .
Item #: FDHD-ZMBK120WS
Condition:
New
Price: $236.89
NEW!
Description: T15 M/T BEARING KIT 67-79 3SPD .
Item #: FDHD-ZMBK121
Condition:
New
Price: $195.89
NEW!
Description: T15 M/T BEARING KIT 67-79 3SPD , W/SYNCHROS .
Item #: FDHD-ZMBK121WS
Condition:
New
Price: $223.89
NEW!
Description: T18 M/T BEARING KIT 65-78 JEEP 4SPD .
Item #: FDHD-ZMBK114J
Condition:
New
Price: $181.89
NEW!
Description: T18 M/T CLUSTER .
Item #: FDHD-ZMBWT18-8
Condition:
New
Price: $364.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK D44
Condition:
New
Price: $269.89
Description: USA Standard mini spool for Dana 44 with 30 spline axles
Item #: FDHD-ZP MINSD44-30
Condition:
New
Price: $132.89
Description: Dana 44 front pinion installation kit.
Item #: FDHD-ZPKD44
Condition:
New
Price: $151.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-488T
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-513T
Condition:
New
Price: $319.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-308
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-392
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-411
Condition:
New
Price: $287.89
Description: USA Standard replacement Ring & Pinion gear set for Dana 44 in a 4.27 ratio
Item #: FDHD-ZG D44-427
Condition:
New
Price: $209.01
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-456
Condition:
New
Price: $277.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-456T
Condition:
New
Price: $277.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-488
Condition:
New
Price: $324.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-513
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-538
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-589
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-456T-RUB
Condition:
New
Price: $316.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-354
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-373
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-411T
Condition:
New
Price: $287.89
Description: USA Standard steel spool for Dana 44 with 30 spline axles, 3.73 & down
Item #: FDHD-ZP FSD44-3-30DN
Condition:
New
Price: $278.89
Description: USA Standard steel spool for Dana 44 with 30 spline axles, 3.92 & up
Item #: FDHD-ZP FSD44-4-30UP
Condition:
New
Price: $266.89
Description: DANA 20 T-CASE BEARING KIT .
Item #: FDHD-ZTBK20A
Condition:
New
Price: $168.89
NEW!
Description: Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219" span and 1.062" caps. The 1330 side has a 3.625" span and 1.062" caps. Both sides are outside snap ring.
Item #: FDHC-YUJ134
Condition:
New
Price: $56.89
NEW!
Description: Yukon 1310 to Mechanics 3R adapter U/Joint.
Item #: FDHC-YUJ3022
Condition:
New
Price: $97.89