- Home »
- Catalog
Complete Offroad » 1975, Chevrolet, C30
Products for:
- Year: 1975
- Make: Chevrolet
- Model: C30
View Universal items for: 1975 Chevrolet C30
Browse Products
Description: 3 quarts of 80W90 Phillips 76 conventional gear oil.
Item #: FDHC-OK 3-QRT-CONV
Condition:
New
Price: $39.89
Description: Adapter sleeve for GM 11.5" & 10.5" 14 bolt truck yokes to use triple lip pinion seal
Item #: FDHC-YY GM26060977
Condition:
New
Price: $24.89
Description: Chrome cover for GM 14T.
Item #: FDHC-YP C1-GM14T
Condition:
New
Price: $64.89
Description: Crush sleeve eliminator kit for GM 10.5" 14 bolt truck. This kit contains a solid spacer & shim kit to eliminate the crush sleeve and set pinion bearing preload.
Item #: FDHC-SK CSGM14T
Condition:
New
Price: $104.89
Description: Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225" DIA, for X/P shaft, 1.87" LNG.
Item #: FDHC-YSPXP-022
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 70 Power Lok case bolt.
Item #: FDHC-YSPBLT-054
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).
Item #: FDHC-YPKD60-PC-P/L
Condition:
New
Price: $172.89
Description: Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Item #: FDHC-YSPXP-010
Condition:
New
Price: $162.89
Description: 3/8" cover bolt, Dana 60, Dana 70 & Dana 80.
Item #: FDHC-YSPBLT-053
Condition:
New
Price: $7.89
Description: Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Item #: FDHC-YY STR-003
Condition:
New
Price: $28.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $19.89
Description: Dana 70 & Dana 80 pinion gear Thrust washer.
Item #: FDHC-YSPTW-018
Condition:
New
Price: $10.89
Description: Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Item #: FDHC-YSPXP-019
Condition:
New
Price: $62.89
Description: Dana 70 4.10 & Down Yukon Dura Grip Positraction, 35 Spline Antilock Brake System Compatible Limited Slip 4 Pinion Design
Item #: FDHC-YDGD70-3-35
Condition:
New
Price: $1,136.89
Description: Eaton Positraction shim kit for GM 14T.
Item #: FDHC-YPKGM14T-PC-SHI
Condition:
New
Price: $73.89
Description: Eaton-type Positraction Carbon clutch kit with 14 plates for GM 14T and 10.5"
Item #: FDHC-YPKGM14T-PC-14
Condition:
New
Price: $313.89
Description: 14T cover gasket.
Item #: FDHC-YCGGM14T
Condition:
New
Price: $14.89
Description: Locking key / wedge for Dana 60 & 70 spindle nut
Item #: FDHC-YSPSP-039
Condition:
New
Price: $29.89
Description: Outer wheel bearing retaining snap ring for GM 14T.
Item #: FDHC-YSPSR-014
Condition:
New
Price: $27.89
Description: Pilot bearing for 10.5" 14 bolt truck, 2.050" O.D.
Item #: FDHC-YB PB-004
Condition:
New
Price: $50.89
Description: 14T GM pinion shim kit.
Item #: FDHC-SK GM14T
Condition:
New
Price: $31.89
Description: Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan M226 rear. 1 5/16" nut, 7/8" x 14 thread.
Item #: FDHC-YSPPN-010
Condition:
New
Price: $10.89
Description: Pinion yoke dust shield for Dana 60 & 70
Item #: FDHC-YSPBF-036
Condition:
New
Price: $10.89
Description: Polished aluminum cover for 14T GM.
Item #: FDHC-YP C2-GM14T
Condition:
New
Price: $266.89
Description: Preload spacer for Dana 70
Item #: FDHC-SK 41009
Condition:
New
Price: $12.89
Description: Replacement redi-sleeve yoke saver for 8.75" c, 9.25" c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Item #: FDHC-YMS99187
Condition:
New
Price: $31.89
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement baffle for Dana 70 & 70HD
Item #: FDHC-YSPBF-004
Condition:
New
Price: $13.89
Description: Replacement Carrier shim kit for Dana 60, 70, 70HD, 70U & 80
Item #: FDHC-SK 30276
Condition:
New
Price: $14.89
Description: Replacement Carrier shim kit for Dana 70 & 70HD
Item #: FDHC-SK 706213
Condition:
New
Price: $136.89
Description: Replacement cover gasket for Dana 50, Dana 60 & Dana 70
Item #: FDHC-YCGD60-D70
Condition:
New
Price: $12.89
Description: Replacement extra large clamshells for use with Yukon Carrier Bearing Puller Sets: YT P20 & YT P22. Fits Dana 70HD, Dana 80, AAM 11.5", Ford 9.75", Ford 10.25" & Ford 10.5".
Item #: FDHC-YT P12
Condition:
New
Price: $205.89
Description: Replacement outer oil slinger for Dana 60, 70, 70U & 70HD
Item #: FDHC-YSPBF-020
Condition:
New
Price: $8.89
Description: Replacement Pinion depth shims for Dana 70HD, Dana 70, Ford 10.25" & 10.5"
Item #: FDHC-SK 30797
Condition:
New
Price: $17.89
Description: Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2" x 20.
Item #: FDHC-YSPBLT-007
Condition:
New
Price: $6.89
Description: Side gear thrust washer for Dana 60, 70 & 80
Item #: FDHC-YSPTW-073
Condition:
New
Price: $7.89
Description: Spindle nut for GM 10.5" 14 bolt truck, 1.935" I.D., 6 holes
Item #: FDHC-YSPSP-037
Condition:
New
Price: $78.89
Description: Spindle nut retainer, 2.030" I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Item #: FDHC-YSPSP-007
Condition:
New
Price: $10.89
Description: Spindle nut washer for GM 10.5" 14 bolt truck, 2.160" I.D., 1 tab
Item #: FDHC-YSPSP-038
Condition:
New
Price: $34.89
Description: Spindle nut, 2.065" I.D., six slots. This replaces Spicer part number 36635.
Item #: FDHC-YSPSP-011
Condition:
New
Price: $30.89
Description: Standard Open cross pin shaft for four pinion design for GM 14T.
Item #: FDHC-YSPXP-037
Condition:
New
Price: $101.89
Description: Steel cover for Dana 70
Item #: FDHC-YP C5-D70
Condition:
New
Price: $129.89
Description: Steel cover for GM 10.5" 14 bolt truck
Item #: FDHC-YP C5-GM14T
Condition:
New
Price: $77.89
Description: U/joint strap bolt for 14T, 7.5", and 8.5" GM.
Item #: FDHC-YSPBLT-074
Condition:
New
Price: $13.89
Description: U/joint strap for GM 14T. (One single strap)
Item #: FDHC-YY STR-007
Condition:
New
Price: $14.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLGM14T-30
Condition:
New
Price: $788.89
Description: The Yukon Grizzly Locker is a mechanical/automatic locking diff that’s engineered for rock crawling, serious trail running, off-road racing, and drag racing. It’s patented design features...More Details »
Item #: FDHC-YGLGM14T-3-40
Condition:
New
Price: $846.89
Description: Manufactured from high strength nodular iron Thick walled design Durable powder coat finish Magnetic drain plug High strength steel fasteners
Item #: FDHC-YHCC-D60
Condition:
New
Price: $303.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
Description: Geared for the installer, this quality Yukon kit is a true time-saver. It includes a carrier bearing puller, axle bearing puller, housing spreader, and a highly effective Yukon Multi-Shim Driver (YT SD-01).
Item #: FDHC-YT KIT-1
Condition:
New
Price: $2,460.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D70-HD
Condition:
New
Price: $650.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM14T-A
Condition:
New
Price: $440.89
Description: Yukon mini spool for GM 10.5" 14 bolt truck
Item #: FDHC-YP MINSGM14T-30
Condition:
New
Price: $293.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM14T-A
Condition:
New
Price: $109.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK D70-HD
Condition:
New
Price: $149.89
Description: 14T GM 14 BOLT REAR NODULAR IRON YUKON DIFFERENTIAL COVER, EARLY W/ 3/8" BOLTS .
Item #: FDHC-YHCC-GM14T-S
Condition:
New
Price: $280.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM14T-A
Condition:
New
Price: $376.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK D70-HD
Condition:
New
Price: $310.89