- Home »
- Catalog
Complete Offroad » 1995, Ford, Ranger
Products for:
- Year: 1995
- Make: Ford
- Model: Ranger
View Universal items for: 1995 Ford Ranger
Browse Products
Description: Side bearing for Corvette, Dana 36 & Dana 28
Item #: FDHC-YB AX-012
Condition:
New
Price: $26.89
Description: Side gear thrust washer (0.750" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-028
Condition:
New
Price: $8.89
Description: Side gear thrust washer (0.875" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-030
Condition:
New
Price: $14.89
Description: Spindle bearing & seal kit for 1993-1996 Ford Dana28, Model 35 IFS & Dana 44 IFS. This replaces Spicer part number 707316X.
Item #: FDHC-YSPSP-029
Condition:
New
Price: $48.89
NEW!
Description: Spindle nut for Dana 28 & Model 35IFS front for manual locking hub conversion. This replaces Spicer part number 43749.
Item #: FDHC-YSPSP-017
Condition:
New
Price: $28.89
NEW!
Description: Spindle nut washer for Dana 28 & Model 35IFS front for manual locking hub conversion. This replaces Spicer part number 36569.
Item #: FDHC-YSPSP-010
Condition:
New
Price: $11.89
Description: Spindle nuts for Ford '83-'89 Bronco II and Ranger.
Item #: FDHC-YP W27988
Condition:
New
Price: $177.89
Description: Spindle nuts for Ford '90-'97 Explorer and Ranger.
Item #: FDHC-YP W32720
Condition:
New
Price: $62.89
NEW!
Description: Spring kit for Dana 28, Model 35IFS, Dana 44IFS & Dana 50IFS with Grizzly, Detroit, TrueTrac or Power Lok
Item #: FDHC-YSPSPR-001
Condition:
New
Price: $44.89
Description: Standard Open & TracLoc pinion gear thrust washer for 7.5" Ford.
Item #: FDHC-YSPTW-026
Condition:
New
Price: $13.89
Description: Standard open cross pin shaft (.750") for Ford 8", 8.8", 9" and Model 20.
Item #: FDHC-YSPXP-027
Condition:
New
Price: $17.89
Description: Standard Open side gear thrust washer for 7.5" Ford.
Item #: FDHC-YSPTW-025
Condition:
New
Price: $22.89
Description: Steel cover for Ford 8.8"
Item #: FDHC-YP C5-F8.8-S
Condition:
New
Price: $85.89
Description: Super Carrier Shim kit for Ford 7.5", GM 7.5", 8.2" & 8.5"
Item #: FDHC-SK SS10
Condition:
New
Price: $42.89
Description: Super Carrier Shim kit for Ford 8.8", GM 12 bolt car & truck, 8.6 & Vette
Item #: FDHC-SK SS12
Condition:
New
Price: $42.89
Description: Trac Loc spring for Ford 7.5"
Item #: FDHC-YSPSPR-003
Condition:
New
Price: $47.89
Description: Trac Loc spring for Ford 8.8", 28 spline
Item #: FDHC-YSPSPR-004
Condition:
New
Price: $67.89
Description: TracLoc clutch set (two sides) for 7.5" Ford.
Item #: FDHC-YPKF7.5-PC
Condition:
New
Price: $261.89
Description: Un-notched cross pin shaft for 7.5" Ford. OEM, not Auburn gear.
Item #: FDHC-YSPXP-025
Condition:
New
Please Call for Availability
Description: Upper ball joint for Model 35 IFS. This replaces Spicer part number 43200.
Item #: FDHC-YSPBJ-005
Condition:
New
Price: $59.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLF8.8-28
Condition:
New
Price: $1,099.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLF8.8-31
Condition:
New
Price: $1,099.89
NEW!
Description: Yukon Hardcore Nodular Iron Cover for 8.8" Ford. High strength steel fasteners Two fill plug heights Fits Std & Reverse rotation
Item #: FDHC-YHCC-F8.8
Condition:
New
Price: $242.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
NEW!
Description: Geared for the installer, this quality Yukon kit is a true time-saver. It includes a carrier bearing puller, axle bearing puller, housing spreader, and a highly effective Yukon Multi-Shim Driver (YT SD-01).
Item #: FDHC-YT KIT-1
Condition:
New
Price: $2,460.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F8.8-A
Condition:
New
Price: $241.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to...More Details »
Item #: FDHC-YK D28
Condition:
New
Price: $529.14
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F7.5
Condition:
New
Price: $242.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK M35-IFS
Condition:
New
Price: $544.89
Description: Yukon Minor install kit for Dana 28 differential. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Item #: FDHC-MK D28
Condition:
New
Limited Supply: Only 5 Left!
Price: $239.14
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK F7.5
Condition:
New
Price: $52.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK F8.8
Condition:
New
Price: $54.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK M35-IFS
Condition:
New
Price: $150.89
Description: Yukon pinion install kit for Dana 28 differential. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and...More Details »
Item #: FDHC-PK D28
Condition:
New
Limited Supply: Only 5 Left!
Price: $201.27
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK F7.5
Condition:
New
Price: $173.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK F8.8-A
Condition:
New
Price: $155.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK M35-IFS
Condition:
New
Price: $186.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-HM88648
Condition:
New
Price: $149.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $149.89
Description: Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set.
Item #: FDHC-YPKF8.8-P-28
Condition:
New
Please Call for Availability
Description: Yukon Positraction shim kit (12 shims) for GM 8.2", GM 8.5"/ 8.6", 12T, 12P, Ford 8.8" & Cast Iron 'Vette
Item #: FDHC-YPKGM12-PC-SHIM
Condition:
New
Price: $38.89
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-411
Condition:
New
Price: $361.70
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-390
Condition:
New
Please Call for Availability
NEW!
Description: Yukon Small 260 axle U/Joint for early Dana front axles. 2.188" snap ring span, 1.062" cap diameter. Inside snap ring.
Item #: FDHC-YUJ260
Condition:
New
Price: $70.89
Description: Model 35IFS standard Open case + spider gears (Explorer ER w/CV ONLY ) loaded.
Item #: FDHC-YC D707378
Condition:
New
Limited Supply: Only 6 Left!
Price: $504.89
Description: Yukon standard open carrier case & spiders, Ford 8.8", 31 spline
Item #: FDHC-YC F3180-S
Condition:
New
Price: $394.89
Description: Yukon standard open carrier case, Ford 7.5"
Item #: FDHC-YC F750500
Condition:
New
Price: $390.89
Description: 8.8" 28 spline standard Open bare case (incl REVERSE) 3/4" cross pin Hole.
Item #: FDHC-YC F880500
Condition:
New
Price: $495.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKF7.5-S-28
Condition:
New
Price: $199.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKF8.8-S-28
Condition:
New
Price: $270.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKF8.8-S-31
Condition:
New
Price: $270.89
Description: Performance steel spool for 8.8" Ford with 31 spline axles. These performance spools are made from the highest quality materials to ensure high strength and long life in performance applications....More Details »
Item #: FDHC-YP FSF8.8-31
Condition:
New
Price: $567.89
Description: Each driver is contoured to the shim’s outside diameter to apply even, uniform force. No more chipping shims or hammering screwdrivers to set your shims. A few dead blows with a ball-peen hammer is all it takes. No returns.
Item #: FDHC-YT SD-01
Condition:
New
Not Available
Price: $182.89
Sale: $85.00
Save: 54%
Save: $97.89
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89
Description: Yukon Trac Loc Positraction, Ford 8.8", 31 spline
Item #: FDHC-YC F318
Condition:
New
Price: $686.89
Description: Yukon yoke for Dana 28. 3.219" snap ring span, 1.062" cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY D28-1310-23S
Condition:
New
Price: $87.89
Description: Yukon yoke for Ford 8.8" truck or passenger with a 1330 U/joint size. 3.625" snap ring span, 1.125" cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY F880601
Condition:
New
Price: $174.89
Description: Yukon yoke for Ford 8.8" truck U/joint size (5" OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY F880602
Condition:
New
Price: $179.89