- Home »
- Catalog
Complete Offroad » 1995, Ford, Bronco
Products for:
- Year: 1995
- Make: Ford
- Model: Bronco
View Universal items for: 1995 Ford Bronco
Browse Products
Description: Cross pin shaft (0.875") for '86 and newer 8.8" Ford.
Item #: FDHC-YSPXP-026
Condition:
New
Price: $42.89
Description: Crush Sleeve for Model 20, Ford 10.25", 10.5", 7.5", 8.8", 9 3/8", 9" & 9.75". .480" long.
Item #: FDHC-YSPCS-002
Condition:
New
Price: $10.89
Description: 2 piece solid spacer for Ford 8.8 and 7.5.
Item #: FDHC-SK CSF8.8
Condition:
New
Price: $83.89
Description: Replacement pinion seal for Dana 25, Dana 27, Dana 30, D36, Dana 44, & Dana 50 .Yukon Mighty seal.
Item #: FDHC-YMS5778
Condition:
New
Price: $18.89
Description: Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Item #: FDHC-YSPPN-029
Condition:
New
Price: $6.89
Description: Replacement inner oil slinger for Dana 25, 27, 30, 44 & 50
Item #: FDHC-YSPBF-013
Condition:
New
Price: $7.89
Description: Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside axle snap ring (next to side gear).
Item #: FDHC-YSPSR-007
Condition:
New
Price: $7.89
Description: Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Item #: FDHC-YSPSR-005
Condition:
New
Price: $8.89
Yukon Gear and Axle Dana 30 & Dana 44 Power Lok bolt, left h&, & 8.75" Chrysler & 55P.. - YSPBLT-052
Description: Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75" Chrysler & 55P.
Item #: FDHC-YSPBLT-052
Condition:
New
Price: $31.89
Description: Dana 30 & Dana 44 roll PIN, 0.235" DIA, for cross pin shaft.
Item #: FDHC-YSPXP-007
Condition:
New
Price: $9.89
Description: Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Item #: FDHC-YPKD44-PC-T/L
Condition:
New
Price: $129.89
Description: Dana 44 3.73 & Down Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-3-30-1
Condition:
New
Price: $820.89
Description: Dana 44 3.92 & Up Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-4-30-1
Condition:
New
Price: $819.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D44
Condition:
New
Price: $127.89
Description: Replacement complete shim kit for Dana 44
Item #: FDHC-SK 706376
Condition:
New
Price: $50.89
Description: Replacement cover gasket. For Dana 44
Item #: FDHC-YCGD44
Condition:
New
Price: $12.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-4-30
Condition:
New
Price: $966.89
Description: Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the best in heat-treating...More Details »
Item #: FDHC-YA D39905
Condition:
New
Price: $272.89
Description: Yukon replacement outer stub axle shaft for Dana 44 IFS with a length of 9.8 inches and with 19 splines. Yukon front axles come with a one year warranty against manufacturing defects.
Item #: FDHC-YA D39906
Condition:
New
Price: $220.89
Description: Dana 44 pinion gear standard Open.
Item #: FDHC-YPKD44-PG-01
Condition:
New
Price: $51.89
Description: Dana 44, GM55P & 8.2" GM pinion gear Thrust washer.
Item #: FDHC-YSPTW-011
Condition:
New
Price: $7.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD44-S-30
Condition:
New
Price: $208.89
Description: 1310 U-bolts, 5/16" x 1-3/8" Dana 30, Dana 44, 8.2", 12P, 12T, VET, Model 20.
Item #: FDHC-YY UB-002
Condition:
New
Price: $29.89
Description: Replacement side gear thrust washer for Dana 44, Model 20, and Ford 8" & 9"
Item #: FDHC-YSPTW-013
Condition:
New
Price: $6.89
Description: Drive Flange Cap for Dana 44
Item #: FDHC-YP DFC-SM-B
Condition:
New
Price: $109.89
Description: Drive Flange Cap for Dana 44, Yukon Engraved
Item #: FDHC-YP DFC-SM-Y
Condition:
New
Price: $109.89
Description: Ford 7.5" & 8.8" ring gear bolt, standard Open & TracLoc. 7/16" x 20.
Item #: FDHC-YSPBLT-024
Condition:
New
Price: $7.89
Description: Ford 7.5", 8", 8.8", & 9" axle stud.
Item #: FDHC-YSPSTUD-005
Condition:
New
Price: $7.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-308
Condition:
New
Price: $427.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-327
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-331
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-355
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-373
Condition:
New
Price: $406.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-411
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-430
Condition:
New
Price: $501.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-456
Condition:
New
Price: $464.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-488
Condition:
New
Price: $476.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-513
Condition:
New
Price: $476.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-571
Condition:
New
Price: $620.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44R-354R
Condition:
New
Price: $428.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44R-373R
Condition:
New
Price: $337.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44R-411R
Condition:
New
Price: $405.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44R-456R
Condition:
New
Price: $405.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44R-488R
Condition:
New
Price: $405.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44R-513R
Condition:
New
Price: $405.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44R-538R
Condition:
New
Price: $405.89
Description: Left inner axle replacement seal for Dana 44, 50, Model 35 IFS. Yukon Mighty seal.
Item #: FDHC-YMS710043
Condition:
New
Price: $30.89
Description: Main Cap stud kit for Ford 7.5", 8.8", 9", 10.25", Dana 44, 60, and 70.
Item #: FDHC-YP TA-1816
Condition:
New
Price: $145.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSF8.8-31
Condition:
New
Price: $241.89
Description: O-ring for Toyota & Dana 44 ZIP locker seal housing
Item #: FDHC-YZLAO-01
Condition:
New
Price: $11.89
Description: O-ring for Yukon Zip Locker Bulkhead fitting kit
Item #: FDHC-YZLAO-05
Condition:
New
Price: $12.89
Description: Replacement oil baffle for Model 35 IFS front, Dana 25, 27, 30, 44 IFS & disconnect and Dana 50.
Item #: FDHC-YSPBF-003
Condition:
New
Price: $7.89
Description: Replacement outer oil slinger for Ford 7.5", 8.8", 9", 10.25", Nissan M226 Rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Item #: FDHC-YSPBF-023
Condition:
New
Price: $10.89
Description: Outer stub thrust washer for Dana 30 & 44
Item #: FDHC-YSPTW-075
Condition:
New
Price: $10.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion gear thrust washer (0.750" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-027
Condition:
New
Price: $11.89
Description: Pinion gear thrust washer (0.875" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-029
Condition:
New
Price: $14.89
Description: Pinion nut for Ford 7.5", 8", 8.8", 9 3/8" & 9". 1 1/6" socket, 3/4" x 20 thread.
Item #: FDHC-YSPPN-020
Condition:
New
Price: $10.89
Description: Pinion seal for 7.5", 8.8", and 9.75" Ford, and also 1985-'86 9" Ford. Yukon Mighty seal.
Item #: FDHC-YMS3604
Condition:
New
Price: $11.89
Description: Power Lok Belleville clutch plate, splined
Item #: FDHC-YPKD44-PC-04
Condition:
New
Price: $31.89