- Home »
- Catalog
Complete Offroad » 1995, Chevrolet / Chevy
Products for:
- Year: 1995
- Make: Chevrolet / Chevy
View Universal items for: 1995 Chevrolet / Chevy
Browse Products
Description: Stub axle retaining clip snap ring for 8.25" GM IFS.
Item #: FDHC-YSPSR-013
Condition:
New
Price: $17.89
Description: Stub axle side seal for '98 and older GM 8.25" IFS. Two needed. Yukon Mighty seal.
Item #: FDHC-YMS710101
Condition:
New
Price: $25.89
Description: Super Carrier Shim kit for Ford 7.5", GM 7.5", 8.2" & 8.5"
Item #: FDHC-SK SS10
Condition:
New
Price: $47.89
Description: 9.5" GM differential carrier Supershim kit.
Item #: FDHC-SK SSGM9.5
Condition:
New
Price: $27.89
Description: Thrust washer for GM 9.25" IFS stub shaft.
Item #: FDHC-YSPTW-066
Condition:
New
Price: $46.89
Description: Thrust washer kit for GM 7.2" IFS stub shaft
Item #: FDHC-YSPTW-067
Condition:
New
Price: $49.89
Description: U/joint strap bolt for 14T, 7.5", and 8.5" GM.
Item #: FDHC-YSPBLT-074
Condition:
New
Price: $15.89
Description: U/joint strap for GM 14T. (One single strap)
Item #: FDHC-YY STR-007
Condition:
New
Price: $16.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLGM14T-30
Condition:
New
Price: $866.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLGM8.5-3-30
Condition:
New
Price: $1,133.89
Description: Manufactured from high strength nodular iron Thick walled design Durable powder coat finish Magnetic drain plug High strength steel fasteners
Item #: FDHC-YHCC-D60
Condition:
New
Price: $333.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-456K
Condition:
New
Price: $503.89
Description: Yukon replacement loaded standard open case For Dana 80, 35 spline, 4.10 & up, non-ABS.
Item #: FDHC-YC D707061
Condition:
New
Price: $1,235.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM9.5-A
Condition:
New
Price: $526.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM7.5-B
Condition:
New
Price: $325.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM7.2IFS-A
Condition:
New
Price: $500.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.25IFS-A
Condition:
New
Price: $447.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D70-HD
Condition:
New
Price: $715.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D80-A
Condition:
New
Price: $827.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM14T-B
Condition:
New
Price: $617.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.5-HD
Condition:
New
Price: $338.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.5
Condition:
New
Price: $259.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM9.25IFS-A
Condition:
New
Price: $607.89
Description: Yukon mini spool for GM 10.5" 14 bolt truck
Item #: FDHC-YP MINSGM14T-30
Condition:
New
Price: $322.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM14T-B
Condition:
New
Price: $120.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK D70-HD
Condition:
New
Price: $164.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK D80-A
Condition:
New
Price: $176.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM7.2IFS-E
Condition:
New
Price: $40.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM8.25IFS-A
Condition:
New
Price: $53.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM8.5
Condition:
New
Price: $47.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM9.25IFS
Condition:
New
Price: $114.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM9.5-A
Condition:
New
Price: $142.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM7.5-A
Condition:
New
Price: $120.89
Description: Yukon new process 205 T/case yoke with 32 spline and a 1410 U/joint size. 4.188" snap ring span, 1.118" cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY NP205-141032
Condition:
New
Price: $178.89
Description: Yukon Performance 1-3/4" deck steel spool for 8.5" GM with 33 spline axles. Uses 1.785 journals. Yukon performance spools are made from the highest quality materials to ensure high strength and...More Details »
Item #: FDHC-YP FSGM8.5-33
Condition:
New
Price: $437.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM7.2IFS-E
Condition:
New
Price: $199.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM14T-B
Condition:
New
Price: $436.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM9.5-A
Condition:
New
Price: $341.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK D70-HD
Condition:
New
Price: $341.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK D80-A
Condition:
New
Price: $356.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM7.5-B
Condition:
New
Price: $208.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM8.25IFS-A
Condition:
New
Price: $245.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM8.5
Condition:
New
Price: $178.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM9.25IFS
Condition:
New
Price: $341.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-HM807046
Condition:
New
Price: $182.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-HM89249
Condition:
New
Price: $119.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $164.89
Description: Helps remove bearings using an extra-large clamshell style bearing puller. No returns.
Item #: FDHC-YT P14
Condition:
New
Price: $52.89
Description: Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set.
Item #: FDHC-YPKGM7.5-P-28
Condition:
New
Price: $295.89
Description: Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set.
Item #: FDHC-YPKGM8.5-P-30
Condition:
New
Price: $355.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKGM9.5-P-33
Condition:
New
Price: $659.89
Description: Yukon Positraction shim kit (12 shims) for GM 8.2", GM 8.5"/ 8.6", 12T, 12P, Ford 8.8" & Cast Iron 'Vette
Item #: FDHC-YPKGM12-PC-SHIM
Condition:
New
Price: $42.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD60-P/L-35
Condition:
New
Price: $878.89
Description: Yukon replacement Power Lok carrier case for Dana 70HD, 4.10 & down
Item #: FDHC-YC D706066
Condition:
New
Price: $829.89
Description: Yukon replacement standard open carrier case for Dana 70HD, 4.56 & up
Item #: FDHC-YC D706069
Condition:
New
Price: $511.89
Description: Yukon replacement standard open carrier case for Dana 80, 3.73 & down, (incl ABS) 35 & 37 spline.
Item #: FDHC-YC D707219
Condition:
New
Price: $554.89
Description: Yukon replacement standard open carrier case for Dana 80, 4.10 & up (NOT ABS) 35 & 37 spline.
Item #: FDHC-YC D707062
Condition:
New
Price: $566.89
Description: Yukon replacement standard open carrier case for Dana 80, 4.10 & up, (incl ABS) 35 & 37 spline.
Item #: FDHC-YC D707230
Condition:
New
Price: $588.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD80-S-37
Condition:
New
Price: $329.89
Description: Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219" snap ring span, 1.062" cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY D60-1310-29S
Condition:
New
Price: $167.89