- Home »
- Catalog
Complete Offroad » 1995, Chevrolet / Chevy, S10 Blazer / Pickup
Products for:
- Year: 1995
- Make: Chevrolet / Chevy
- Model: S10 Blazer / Pickup
View Universal items for: 1995 Chevrolet / Chevy S10 Blazer / Pickup
Browse Products
Description: This tool easily removes broken cross pin bolts from the carrier case for ease of installation when things get tough. No returns.
Item #: FDHC-YT BE-01
Condition:
New
Price: $85.89
Description: This tool helps set the proper carrier bearing preload. No returns.
Item #: FDHC-YT S01
Condition:
New
Price: $688.89
Description: GM 7.5" & 7.6" DURA GRIP case, bare, 3.23 & up, 26spline & 28spline.
Item #: FDHC-YC GM7.5-DG-3
Condition:
New
Price: $396.89
Description: Yukon forged yoke for GM 8.5" with a 1350 U/joint size. 3.625" snap ring span, 1.188" cap diameter. Outside snap ring. This yoke uses U-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY GM8.5-1350-F
Condition:
New
Price: $368.89
Description: 14 plate Carbon clutches for GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette
Item #: FDHC-YPKGM12-PC-14
Condition:
New
Price: $399.89
Description: 14 plate DURAGRIP COMPOSITE clutches, GM 7.5.
Item #: FDHC-YPKGM7.5-PC-DG1
Condition:
New
Price: $195.89
Description: 14 plate DuraGrip Composite clutches for GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette
Item #: FDHC-YPKGM12-PC-DG1
Condition:
New
Price: $368.89
Description: 18 plate steel clutches for GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette
Item #: FDHC-YPKGM12-PC-18
Condition:
New
Price: $493.89
Description: 18 tooth ABS reluctor for GM 8.5" in 3.73 ratio, Impala and Caprice.
Item #: FDHC-YSPABS-022
Condition:
New
Price: $184.89
Description: 7.2" GM 7.5" GM & 8.2" GM pinion seal. Yukon Mighty seal.
Item #: FDHC-YMS8610
Condition:
New
Price: $10.89
Description: 7.2" shifter seal. Yukon Mighty seal.
Item #: FDHC-YMSG1014
Condition:
New
Price: $26.89
Description: 7.2" stub axle seal. Yukon Mighty seal.
Item #: FDHC-YMSG1010
Condition:
New
Price: $49.89
Description: 7.2IFS GM Standard Open loaded case 3.23 & up.
Item #: FDHC-YC G46002013
Condition:
New
Price: $449.89
Description: 7.5 & 7.625 Standard Open Pinion gear Thrust Washer.
Item #: FDHC-YSPTW-052
Condition:
New
Price: $10.89
Description: 7.5 GM cover gasket.
Item #: FDHC-YCGGM7.5
Condition:
New
Price: $12.89
Description: 7.5" and 8.5" GM rear U/joint strap, Mech 3R.
Item #: FDHC-YY STR-008
Condition:
New
Price: $27.89
Description: 7.5" &7.625" GM 3.23 & Up Yukon Dura Grip Limited Slip, 28 Spline Positraction Composite Clutches
Item #: FDHC-YDGGM7.5-3-28-SM
Condition:
New
Price: $828.89
Description: 8.2" & 8.5" rear cover gasket.
Item #: FDHC-YCGGM8.5
Condition:
New
Price: $13.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2" & 8.5" differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK GM8.5
Condition:
New
Price: $104.89
Description: Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains.
Item #: FDHC-YDGGM8.5-3-30-1
Condition:
New
Price: $826.89
Description: 8.5" & 8.6" GM standard Open pinion gear Thrust washer. also fits 8.5" Eaton with 0.795" cross pin.
Item #: FDHC-YSPTW-047
Condition:
New
Price: $13.89
Description: 8.5" GM EXTRA HD standard Open case (uses larger bearings).
Item #: FDHC-YC G26010481-XHD
Condition:
New
Price: $270.89
Description: Adjuster lock bolt for left hand case half of 7.2" and 9.25" GM IFS.
Item #: FDHC-YSPBLT-062
Condition:
New
Price: $19.89
Description: Aluminum Girdle cover for 8.2" and 8.5" GM TA HD.
Item #: FDHC-YP C3-GM8.5-R
Condition:
New
Price: $408.89
Description: Aluminum girdle cover for GM 7.5" & 7.625"
Item #: FDHC-YP C3-GM7.5
Condition:
New
Price: $368.89
Description: Axle seal for '88 and newer GM 8.5" Chevy C10.Yukon Mighty seal.
Item #: FDHC-YMS4762N
Condition:
New
Price: $14.89
Description: Axle seal for 5707 OR 1563 bearing. Yukon Mighty seal.
Item #: FDHC-YMS8660S
Condition:
New
Price: $7.89
Description: Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Item #: FDHC-YMS8835S
Condition:
New
Price: $10.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: C/clip for GM 7.5", 7.6" & 8"
Item #: FDHC-YSPCC-009
Condition:
New
Price: $17.89
Description: Chrome cover for 7.5" GM.
Item #: FDHC-YP C1-GM7.5
Condition:
New
Price: $61.89
Description: Chrome cover for 8.6", 8.5" and 8.2" GM rear.
Item #: FDHC-YP C1-GM8.5-R
Condition:
New
Price: $63.89
Description: Chrome Moly cross pin shaft for Mini-Spool for 8.5" GM HD.
Item #: FDHC-YP MINSXGM8.5
Condition:
New
Price: $55.89
Description: Clutch guide for GM 7.5" & 7.6" Yukon Dura Grip
Item #: FDHC-YSPCG-004
Condition:
New
Price: $13.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft for 7.2" GM.
Item #: FDHC-YSPXP-035
Condition:
New
Price: $52.89
Description: Cross pin shaft for 7.5", 7.625", and 8" GM.
Item #: FDHC-YSPXP-036
Condition:
New
Price: $48.89
Description: Crush sleeve for GM 7.5", 7.6", 7.6" IFS, 8.0", 8.2" & 8.2" Buick/Old's/Pontiac. .625" long.
Item #: FDHC-YSPCS-027
Condition:
New
Price: $7.89
Description: Crush sleeve eliminator kit for GM 7.5" & 8.2"
Item #: FDHC-SK CSGM7.5
Condition:
New
Price: $50.89
Description: Crush sleeve eliminator kit for GM 8.5" & Chrysler 9.25"
Item #: FDHC-SK CSGM8.5
Condition:
New
Price: $50.89
Description: Replacement Crush Sleeve for GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan M226 rear. Approx. 0.620" long.
Item #: FDHC-YSPCS-014
Condition:
New
Price: $8.89
Description: 5/16"-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5", 7.625", 8.2", 8.5", 12 bolt passenger car and truck.
Item #: FDHC-YSPBLT-075
Condition:
New
Price: $6.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $15.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $10.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-342T
Condition:
New
Price: $448.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-373T
Condition:
New
Price: $473.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-411T
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-273
Condition:
New
Price: $495.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-308
Condition:
New
Price: $442.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-323
Condition:
New
Price: $402.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-342
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-373
Condition:
New
Price: $543.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-411
Condition:
New
Price: $473.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-430
Condition:
New
Price: $620.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-456
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-273
Condition:
New
Price: $517.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-308
Condition:
New
Price: $607.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-323
Condition:
New
Price: $372.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-342
Condition:
New
Price: $378.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM8.5-390
Condition:
New
Price: $458.89