- Home »
- Catalog
Complete Offroad » 1994, Ranger
Products for:
- Year: 1994
- Model: Ranger
View Universal items for: 1994 Ranger
Browse Products
Description: 8.8" Ford TracLoc (with long ears--for early models only) clutch set, both sides.
Item #: FDHC-YPKF8.8-PC
Condition:
New
Price: $199.89
Description: 8.8" Ford TracLoc (with short ears--for late models only) clutch set, both sides.
Item #: FDHC-YPKF8.8-PC-L
Condition:
New
Price: $228.89
Description: 8.8" Ford Yukon Dura Grip Limited Slip, 28 Spline Positraction Composite Clutches
Item #: FDHC-YDGF8.8-28-1
Condition:
New
Price: $828.89
Description: 8.8" Ford Yukon Dura Grip Limited Slip, 31 Spline Positraction Composite Clutches
Item #: FDHC-YDGF8.8-31-1
Condition:
New
Price: $820.89
Description: ABS carrier case exciter ring (tone ring) with 108 teeth for 8.8" Ford.
Item #: FDHC-YSPABS-017
Condition:
New
Price: $143.89
Description: ABS exciter ring (tone ring) for 7.5" Ford.
Item #: FDHC-YSPABS-016
Condition:
New
Price: $140.89
Description: Axle ABS tone ring for '03 & up Crown Victoria, 3.6" diameter, 35 teeth
Item #: FDHC-YSPABS-026
Condition:
New
Price: $27.89
Description: Axle seal for 5707 OR 1563 bearing. Yukon Mighty seal.
Item #: FDHC-YMS8660S
Condition:
New
Price: $7.89
Description: Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Item #: FDHC-YMS8835S
Condition:
New
Price: $10.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8" differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK F8.8
Condition:
New
Price: $123.89
Description: Chrome cover for 7.5" Ford.
Item #: FDHC-YP C1-F7.5
Condition:
New
Price: $41.89
Description: Chrome cover for 8.8" Ford.
Item #: FDHC-YP C1-F8.8
Condition:
New
Price: $65.89
Description: Cover bolt for Ford 7.5", 8.8" & 9.75"
Item #: FDHC-YSPBLT-079
Condition:
New
Price: $7.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft (0.875") for '86 and newer 8.8" Ford.
Item #: FDHC-YSPXP-026
Condition:
New
Price: $42.89
Description: Crush Sleeve for Model 20, Ford 10.25", 10.5", 7.5", 8.8", 9 3/8", 9" & 9.75". .480" long.
Item #: FDHC-YSPCS-002
Condition:
New
Price: $10.89
Description: Crush Sleeve for Model 35, Chrysler 7.25", 8.25" Ford 8" & GM 7.75". Approx. 0.480" long.
Item #: FDHC-YSPCS-010
Condition:
New
Price: $8.89
Description: 2 piece solid spacer for Ford 8.8 and 7.5.
Item #: FDHC-SK CSF8.8
Condition:
New
Price: $83.89
Description: 5/16"-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5", 7.625", 8.2", 8.5", 12 bolt passenger car and truck.
Item #: FDHC-YSPBLT-075
Condition:
New
Price: $6.89
Description: Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560" side gear bore only.
Item #: FDHC-YSPTW-015
Condition:
New
Price: $10.89
Description: Dana 28 (93^) & Model 35 outer axle/hub snap ring.
Item #: FDHC-YSPSR-008
Condition:
New
Price: $7.89
Description: Dana 28 right and Dana 36 left and right, replacement inner axle seal (2.175" OD).Yukon Mighty seal.
Item #: FDHC-YMS3543
Condition:
New
Price: $50.89
Description: Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside axle snap ring (next to side gear).
Item #: FDHC-YSPSR-007
Condition:
New
Price: $7.89
Description: Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Item #: FDHC-YSPSR-005
Condition:
New
Price: $8.89
Description: Ford 7.5" & 8.8" ring gear bolt, standard Open & TracLoc. 7/16" x 20.
Item #: FDHC-YSPBLT-024
Condition:
New
Price: $7.89
Description: Ford 7.5" C/clip, TracLoc & standard Open.
Item #: FDHC-YSPCC-007
Condition:
New
Price: $9.89
Description: Ford 7.5", 8", 8.8", & 9" axle stud.
Item #: FDHC-YSPSTUD-005
Condition:
New
Price: $7.89
Description: Ford OEM steel differential cover
Item #: FDHC-YP C5-F7.5-S
Condition:
New
Price: $87.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-273
Condition:
New
Price: $432.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-308
Condition:
New
Price: $504.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-327
Condition:
New
Price: $659.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-331
Condition:
New
Price: $88,888.88
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-345
Condition:
New
Price: $357.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-373
Condition:
New
Price: $357.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-411
Condition:
New
Price: $396.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-456
Condition:
New
Price: $396.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-308
Condition:
New
Price: $427.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-327
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-331
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-355
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-373
Condition:
New
Price: $406.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-411
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-430
Condition:
New
Price: $501.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-456
Condition:
New
Price: $464.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-488
Condition:
New
Price: $476.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-513
Condition:
New
Price: $476.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-571
Condition:
New
Price: $620.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35R-411R
Condition:
New
Price: $397.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG M35R-456R
Condition:
New
Price: $397.89
Description: Lower ball joint for Model 35 IFS. This replaces Spicer part number 43269.
Item #: FDHC-YSPBJ-006
Condition:
New
Price: $88.89
Description: Main Cap stud kit for Ford 7.5", 8.8", 9", 10.25", Dana 44, 60, and 70.
Item #: FDHC-YP TA-1816
Condition:
New
Price: $145.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSF8.8-28
Condition:
New
Price: $239.89
Description: Model 35 roll pin for cross pin shaft, 0.190" DIA.
Item #: FDHC-YSPXP-015
Condition:
New
Price: $9.89
Description: Replacement oil baffle for Model 35 IFS front, Dana 25, 27, 30, 44 IFS & disconnect and Dana 50.
Item #: FDHC-YSPBF-003
Condition:
New
Price: $7.89
Description: Replacement outer oil slinger for Ford 7.5", 8.8", 9", 10.25", Nissan M226 Rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Item #: FDHC-YSPBF-023
Condition:
New
Price: $10.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion gear thrust washer (0.750" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-027
Condition:
New
Price: $11.89
Description: Pinion gear thrust washer (0.875" shaft) for 8.8" Ford.
Item #: FDHC-YSPTW-029
Condition:
New
Price: $14.89
Description: Pinion nut for Ford 7.5", 8", 8.8", 9 3/8" & 9". 1 1/6" socket, 3/4" x 20 thread.
Item #: FDHC-YSPPN-020
Condition:
New
Price: $10.89