- Home »
- Catalog
Complete Offroad » 1992, Chevrolet
Products for:
- Year: 1992
- Make: Chevrolet
View Universal items for: 1992 Chevrolet
Browse Products
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D44
Condition:
New
Price: $127.89
Description: Replacement complete shim kit for Dana 44
Item #: FDHC-SK 706376
Condition:
New
Price: $50.89
Description: Replacement cover gasket. For Dana 44
Item #: FDHC-YCGD44
Condition:
New
Price: $12.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-4-30
Condition:
New
Price: $966.89
Description: Replacement pinion nut washer for Dana 44 JK, 60, 70U, '08 & newer Ford 10.5" & Nissan Titan rear.
Item #: FDHC-YSPPN-030
Condition:
New
Price: $6.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D44-REAR
Condition:
New
Price: $359.89
Description: Dana 44 pinion gear standard Open.
Item #: FDHC-YPKD44-PG-01
Condition:
New
Price: $51.89
Description: Dana 44, GM55P & 8.2" GM pinion gear Thrust washer.
Item #: FDHC-YSPTW-011
Condition:
New
Price: $7.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP FSD44-3-30DN
Condition:
New
Price: $369.89
Description: 1310 U-bolts, 5/16" x 1-3/8" Dana 30, Dana 44, 8.2", 12P, 12T, VET, Model 20.
Item #: FDHC-YY UB-002
Condition:
New
Price: $29.89
Description: Replacement side gear thrust washer for Dana 44, Model 20, and Ford 8" & 9"
Item #: FDHC-YSPTW-013
Condition:
New
Price: $6.89
Description: Dana 44-HD (HD design ONLY ) TracLoc clutch set.
Item #: FDHC-YPKD44HD-PC-T/L
Condition:
New
Price: $161.89
Description: Dana 44-HD (HD ONLY ) cross pin bolt, standard Open & TracLoc (with C-clip).
Item #: FDHC-YSPBLT-058
Condition:
New
Price: $13.89
Description: Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225" DIA, for X/P shaft, 1.87" LNG.
Item #: FDHC-YSPXP-022
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 70 Power Lok case bolt.
Item #: FDHC-YSPBLT-054
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).
Item #: FDHC-YPKD60-PC-P/L
Condition:
New
Price: $172.89
Description: Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Item #: FDHC-YSPXP-010
Condition:
New
Price: $162.89
Description: 3/8" cover bolt, Dana 60, Dana 70 & Dana 80.
Item #: FDHC-YSPBLT-053
Condition:
New
Price: $7.89
Description: Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Item #: FDHC-YY STR-003
Condition:
New
Price: $28.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $19.89
Description: Dana 70 & Dana 80 pinion gear Thrust washer.
Item #: FDHC-YSPTW-018
Condition:
New
Price: $10.89
Description: Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Item #: FDHC-YSPXP-019
Condition:
New
Price: $62.89
Description: Dana 70 4.10 & Down Yukon Dura Grip Positraction, 35 Spline Antilock Brake System Compatible Limited Slip 4 Pinion Design
Item #: FDHC-YDGD70-3-35
Condition:
New
Price: $1,136.89
Description: Dana 80 3.73 & Down Yukon Dura Grip Positraction, 35 Spline, Antilock Brake System Compatible Limited Slip 4 Pinion Design
Item #: FDHC-YDGD80-3-35
Condition:
New
Price: $1,205.89
Description: Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains.
Item #: FDHC-YDGD80-4-35
Condition:
New
Price: $1,226.89
Description: Dana 80 ABS exciter tone ring.
Item #: FDHC-YSPABS-008
Condition:
New
Price: $160.89
Description: Pinion Preload Shim Kit for Dana 80
Item #: FDHC-SK 42429
Condition:
New
Price: $19.89
Description: Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).
Item #: FDHC-YPKD80-PC-T/L
Condition:
New
Price: $451.89
Description: Eaton Positraction shim kit for GM 14T.
Item #: FDHC-YPKGM14T-PC-SHI
Condition:
New
Price: $73.89
Description: Eaton Positraction shim kit for 9.5" GM.
Item #: FDHC-YPKGM9.5-PC-SHI
Condition:
New
Price: $37.89
Description: Eaton-type 14 plate Carbon clutch set for 9.5" GM and 9.75" Ford.
Item #: FDHC-YPKGM9.5-PC-14
Condition:
New
Price: $350.89
Description: Eaton-type Positraction Carbon clutch kit with 14 plates for GM 14T and 10.5"
Item #: FDHC-YPKGM14T-PC-14
Condition:
New
Price: $313.89
Description: Finned aluminum cover for Dana 80
Item #: FDHC-YP C5-D80-A
Condition:
New
Price: $212.89
Description: 14T cover gasket.
Item #: FDHC-YCGGM14T
Condition:
New
Price: $14.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $15.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $10.89
Description: 8.25IFS RIGHT HAND EXTREME INNER DISCONNECT STUB AXLE, '88-'08 GM 4WD FRONT, w/ needle bearing.
Item #: FDHC-YA GM19121908
Condition:
New
Price: $137.89
Description: GM 9.25" IFS snap ring for outer stub.
Item #: FDHC-YSPSR-012
Condition:
New
Price: $9.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades.
Item #: FDHC-CK GM9.5
Condition:
New
Price: $207.89
Description: GM 9.5" ring gear bolt. 12mm x 1.5.
Item #: FDHC-YSPBLT-017
Condition:
New
Price: $13.89
Description: Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, seals, and...More Details »
Item #: FDHC-YSPBLT-080
Condition:
New
Price: $8.89
Description: GM side gear spacer sleeve for GM 9.25" IFS
Item #: FDHC-YSPTW-074
Condition:
New
Price: $37.89
Description: Inner axle retaining snap ring for 7.2" GM.
Item #: FDHC-YSPSR-011
Condition:
New
Price: $10.89
Description: This kit will improve your car’s launching ability and deliver that “shot out of a cannon” acceleration we all lust for. It allows you to upgrade to a more aggressive gear ratio and includes...More Details »
Item #: FDHC-YGK2329
Condition:
New
Price: $627.89
Description: This kit will improve your car’s launching ability and deliver that “shot out of a cannon” acceleration we all lust for. It allows you to upgrade to a more aggressive gear ratio and includes...More Details »
Item #: FDHC-YGK2330
Condition:
New
Price: $627.89
Description: This kit will improve your car’s launching ability and deliver that “shot out of a cannon” acceleration we all lust for. It allows you to upgrade to a more aggressive gear ratio and includes...More Details »
Item #: FDHC-YGK2331
Condition:
New
Price: $627.89
Description: This kit will improve your car’s launching ability and deliver that “shot out of a cannon” acceleration we all lust for. It allows you to upgrade to a more aggressive gear ratio and includes...More Details »
Item #: FDHC-YGK2332
Condition:
New
Price: $627.89
Description: This kit will improve your car’s launching ability and deliver that “shot out of a cannon” acceleration we all lust for. It allows you to upgrade to a more aggressive gear ratio and includes...More Details »
Item #: FDHC-YGK2333
Condition:
New
Price: $641.89
Description: This kit will improve your car’s launching ability and deliver that “shot out of a cannon” acceleration we all lust for. It allows you to upgrade to a more aggressive gear ratio and includes...More Details »
Item #: FDHC-YGK2334
Condition:
New
Price: $641.89
Description: This kit dramatically improves traction and durability by adding a Yukon Dura Grip LSD and an upgraded ring and pinion set to your diff. It’s also an opportunity to generate next-level...More Details »
Item #: FDHC-YGK2335
Condition:
New
Price: $1,299.89
Description: This kit dramatically improves traction and durability by adding a Yukon Dura Grip LSD and an upgraded ring and pinion set to your diff. It’s also an opportunity to generate next-level...More Details »
Item #: FDHC-YGK2336
Condition:
New
Price: $1,355.89
Description: This kit dramatically improves traction and durability by adding a Yukon Dura Grip LSD and an upgraded ring and pinion set to your diff. It’s also an opportunity to generate next-level...More Details »
Item #: FDHC-YGK2337
Condition:
New
Price: $1,411.89
Description: This kit dramatically improves traction and durability by adding a Yukon Dura Grip LSD and an upgraded ring and pinion set to your diff. It’s also an opportunity to generate next-level...More Details »
Item #: FDHC-YGK2338
Condition:
New
Price: $1,299.89
Description: This kit dramatically improves traction and durability by adding a Yukon Dura Grip LSD and an upgraded ring and pinion set to your diff. It’s also an opportunity to generate next-level...More Details »
Item #: FDHC-YGK2339
Condition:
New
Price: $1,355.89
Description: This kit dramatically improves traction and durability by adding a Yukon Dura Grip LSD and an upgraded ring and pinion set to your diff. It’s also an opportunity to generate next-level...More Details »
Item #: FDHC-YGK2340
Condition:
New
Price: $1,355.89
Description: Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226.
Item #: FDHC-YSPCG-003
Condition:
New
Price: $11.89
Description: Left hand adjuster lock nut for 9.25" GM.
Item #: FDHC-YSPSA-008
Condition:
New
Price: $22.89
Description: Left hand carrier bearing adjuster for 9.25" GM IFS.
Item #: FDHC-YSPSA-016
Condition:
New
Price: $100.89
Description: Locking key / wedge for Dana 60 & 70 spindle nut
Item #: FDHC-YSPSP-039
Condition:
New
Price: $29.89
Description: Long shaft inner clip for 9.25" GM IFS.
Item #: FDHC-YSPSR-015
Condition:
New
Price: $21.89