- Home »
- Catalog
Complete Offroad » 1989, Chevrolet, K3500
Products for:
- Year: 1989
- Make: Chevrolet
- Model: K3500
View Universal items for: 1989 Chevrolet K3500
Browse Products
NEW!
Description: 1330 Yukon Lifetime U/Joint. 3.625" snap ring span, 1.062" cap diameter. Outside snap ring.
Item #: FDHC-YUJ1330
Condition:
New
Price: $48.89
Description: 1350 & 1410 U/joint U-bolts, 3/8" X 1-11/16", kit.
Item #: FDHC-YY UB-004
Condition:
New
Price: $18.89
NEW!
Description: Yukon Gear & Axle Pinion Support Bolt for 14T GM, 7/16-14" Long
Item #: FDHC-YSPBLT-087
Condition:
New
Price: $8.89
Description: 14T pinion gear Thrust washer.
Item #: FDHC-YSPTW-046
Condition:
New
Price: $10.89
Description: 14T side gear Thrust washer.
Item #: FDHC-YSPTW-045
Condition:
New
Price: $10.89
NEW!
Description: 3 quarts of Phillips 76 80W90 conventional gear oil with bottle of Posi additive (limited slip friction modifier).
Item #: FDHC-OK 3-QRT-CONV-A
Condition:
New
Price: $49.89
NEW!
Description: 3 quarts of 80W90 Phillips 76 conventional gear oil.
Item #: FDHC-OK 3-QRT-CONV
Condition:
New
Price: $39.89
NEW!
Description: Adapter sleeve for GM 11.5" & 10.5" 14 bolt truck yokes to use triple lip pinion seal
Item #: FDHC-YY GM26060977
Condition:
New
Price: $24.89
Description: Adjuster lock bolt for left hand case half of 7.2" and 9.25" GM IFS.
Item #: FDHC-YSPBLT-062
Condition:
New
Price: $19.89
Description: Chrome cover for GM 14T.
Item #: FDHC-YP C1-GM14T
Condition:
New
Price: $64.89
Description: Crush Sleeve for Chrysler 9.25" front, GM 8.6" IRS, 9.25" IFS & 9.5". Approx. 0.640" long.
Item #: FDHC-YSPCS-016
Condition:
New
Price: $8.89
Description: Crush sleeve eliminator kit for GM 10.5" 14 bolt truck. This kit contains a solid spacer & shim kit to eliminate the crush sleeve and set pinion bearing preload.
Item #: FDHC-SK CSGM14T
Condition:
New
Price: $104.89
Description: Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225" DIA, for X/P shaft, 1.87" LNG.
Item #: FDHC-YSPXP-022
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 70 Power Lok case bolt.
Item #: FDHC-YSPBLT-054
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).
Item #: FDHC-YPKD60-PC-P/L
Condition:
New
Price: $172.89
Description: Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Item #: FDHC-YSPXP-010
Condition:
New
Price: $162.89
NEW!
Description: Dana 60 4.10 & Down Yukon Dura Grip Positraction, Narrow, 35 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-3-35
Condition:
New
Price: $968.89
NEW!
Description: Dana 60 4.56 & Up Yukon Dura Grip Positraction, Narrow, 35 Spline, Antilock Brake System Compatible Fits Front or Full Float Rear Applications, Not Compatible with C-Clip Rear Axles 4 Pinion...More Details »
Item #: FDHC-YDGD60-4-35
Condition:
New
Price: $985.89
Description: 3/8" cover bolt, Dana 60, Dana 70 & Dana 80.
Item #: FDHC-YSPBLT-053
Condition:
New
Price: $7.89
Description: Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Item #: FDHC-YY STR-003
Condition:
New
Price: $28.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $19.89
Description: Dana 70 & Dana 80 pinion gear Thrust washer.
Item #: FDHC-YSPTW-018
Condition:
New
Price: $10.89
Description: Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Item #: FDHC-YSPXP-019
Condition:
New
Price: $62.89
NEW!
Description: Dana 70 4.10 & Down Yukon Dura Grip Positraction, 35 Spline Antilock Brake System Compatible Limited Slip 4 Pinion Design
Item #: FDHC-YDGD70-3-35
Condition:
New
Price: $1,136.89
Description: Eaton Positraction shim kit for GM 14T.
Item #: FDHC-YPKGM14T-PC-SHI
Condition:
New
Please Call for Availability
Description: Eaton-type Positraction Carbon clutch kit with 14 plates for GM 14T and 10.5"
Item #: FDHC-YPKGM14T-PC-14
Condition:
New
Please Call for Availability
Description: 14T cover gasket.
Item #: FDHC-YCGGM14T
Condition:
New
Price: $14.89
Description: GM 9.25" IFS snap ring for outer stub.
Item #: FDHC-YSPSR-012
Condition:
New
Price: $9.89
Description: GM 9.5" ring gear bolt. 12mm x 1.5.
Item #: FDHC-YSPBLT-017
Condition:
New
Price: $13.89
NEW!
Description: Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, seals, and...More Details »
Item #: FDHC-YSPBLT-080
Condition:
New
Price: $8.89
Description: GM side gear spacer sleeve for GM 9.25" IFS
Item #: FDHC-YSPTW-074
Condition:
New
Price: $37.89
Description: Left hand adjuster lock nut for 9.25" GM.
Item #: FDHC-YSPSA-008
Condition:
New
Price: $22.89
Description: Left hand carrier bearing adjuster for 9.25" GM IFS.
Item #: FDHC-YSPSA-016
Condition:
New
Price: $100.89
NEW!
Description: Locking key / wedge for Dana 60 & 70 spindle nut
Item #: FDHC-YSPSP-039
Condition:
New
Price: $29.89
Description: Long shaft inner clip for 9.25" GM IFS.
Item #: FDHC-YSPSR-015
Condition:
New
Price: $21.89
Description: O-ring for left hand carrier bearing adjuster for 9.25" GM IFS.
Item #: FDHC-YSPO-002
Condition:
New
Price: $17.89
Description: Outer wheel bearing retaining snap ring for GM 14T.
Item #: FDHC-YSPSR-014
Condition:
New
Price: $27.89
Description: Pilot bearing for 10.5" 14 bolt truck, 2.050" O.D.
Item #: FDHC-YB PB-004
Condition:
New
Price: $50.89
Description: 14T GM pinion shim kit.
Item #: FDHC-SK GM14T
Condition:
New
Price: $31.89
Description: Pinion nut for GM 7.2" IFS, 7.5", 7.6", 7.6" IFS, 8.0", 8.25", 8.5", 8.6", 9.25" IFS, 9.5" & Oldsmobile Dropouts. 1 1/4" socket, 7/8" x 14 thread.
Item #: FDHC-YSPPN-018
Condition:
New
Price: $10.89
Description: Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan M226 rear. 1 5/16" nut, 7/8" x 14 thread.
Item #: FDHC-YSPPN-010
Condition:
New
Price: $10.89
Description: Pinion yoke dust shield for Dana 60 & 70
Item #: FDHC-YSPBF-036
Condition:
New
Price: $10.89
Description: Polished aluminum cover for 14T GM.
Item #: FDHC-YP C2-GM14T
Condition:
New
Price: $266.89
Description: Preload spacer for Dana 70
Item #: FDHC-SK 41009
Condition:
New
Price: $12.89
NEW!
Description: Replacement redi-sleeve yoke saver for 8.75" c, 9.25" c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Item #: FDHC-YMS99187
Condition:
New
Price: $31.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement baffle for Dana 70 & 70HD
Item #: FDHC-YSPBF-004
Condition:
New
Price: $13.89
Description: Replacement Carrier shim kit for Dana 60, 70, 70HD, 70U & 80
Item #: FDHC-SK 30276
Condition:
New
Price: $14.89
Description: Replacement Carrier shim kit for Dana 70 & 70HD
Item #: FDHC-SK 706213
Condition:
New
Price: $136.89
Description: Replacement cover gasket for Dana 50, Dana 60 & Dana 70
Item #: FDHC-YCGD60-D70
Condition:
New
Price: $12.89
Description: Replacement extra large clamshells for use with Yukon Carrier Bearing Puller Sets: YT P20 & YT P22. Fits Dana 70HD, Dana 80, AAM 11.5", Ford 9.75", Ford 10.25" & Ford 10.5".
Item #: FDHC-YT P12
Condition:
New
Price: $205.89
Description: Replacement outer oil slinger for Dana 60, 70, 70U & 70HD
Item #: FDHC-YSPBF-020
Condition:
New
Price: $8.89
Description: Replacement Pinion depth shims for Dana 70HD, Dana 70, Ford 10.25" & 10.5"
Item #: FDHC-SK 30797
Condition:
New
Price: $17.89
Description: Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2" x 20.
Item #: FDHC-YSPBLT-007
Condition:
New
Price: $6.89
Description: Right hand adjuster lock for 9.25" GM IFS.
Item #: FDHC-YSPSA-014
Condition:
New
Price: $19.89
Description: Side gear thrust washer for Dana 60, 70 & 80
Item #: FDHC-YSPTW-073
Condition:
New
Price: $7.89
Description: Spindle nut for GM 10.5" 14 bolt truck, 1.935" I.D., 6 holes
Item #: FDHC-YSPSP-037
Condition:
New
Price: $78.89
Description: Spindle nut retainer, 2.030" I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Item #: FDHC-YSPSP-007
Condition:
New
Price: $10.89