- Home »
- Catalog
Complete Offroad » 1988, Chevrolet, S10
Products for:
- Year: 1988
- Make: Chevrolet
- Model: S10
View Universal items for: 1988 Chevrolet S10
Browse Products
Description: Clutch guide for GM 7.5" & 7.6" Yukon Dura Grip
Item #: FDHC-YSPCG-004
Condition:
New
Price: $13.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft for 7.2" GM.
Item #: FDHC-YSPXP-035
Condition:
New
Price: $52.89
Description: Cross pin shaft for 7.5", 7.625", and 8" GM.
Item #: FDHC-YSPXP-036
Condition:
New
Price: $48.89
Description: Crush sleeve for GM 7.5", 7.6", 7.6" IFS, 8.0", 8.2" & 8.2" Buick/Old's/Pontiac. .625" long.
Item #: FDHC-YSPCS-027
Condition:
New
Price: $7.89
Description: Crush sleeve eliminator kit for GM 7.5" & 8.2"
Item #: FDHC-SK CSGM7.5
Condition:
New
Price: $50.89
Description: 5/16"-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5", 7.625", 8.2", 8.5", 12 bolt passenger car and truck.
Item #: FDHC-YSPBLT-075
Condition:
New
Price: $6.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $15.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $10.89
Description: Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, seals, and...More Details »
Item #: FDHC-YSPBLT-080
Condition:
New
Price: $8.89
Description: Inner axle retaining snap ring for 7.2" GM.
Item #: FDHC-YSPSR-011
Condition:
New
Price: $10.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSGM7.5-26
Condition:
New
Price: $303.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSGM7.6-28
Condition:
New
Price: $261.89
Description: Notched cross pin shaft for 7.5" GM. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Item #: FDHC-YSPXP-054
Condition:
New
Price: $73.89
Description: 8" Toyota, 7.5" GM, 8.2" GM, 12T, pinion shim set, & Mazda truck.
Item #: FDHC-SK T8
Condition:
New
Price: $31.89
Description: Pinion depth shims for 7.5" GM, 7.75" GM, 8.2" GM, 12T, & other
Item #: FDHC-SK 21104
Condition:
New
Price: $24.89
Description: Pinion nut for GM 7.2" IFS, 7.5", 7.6", 7.6" IFS, 8.0", 8.25", 8.5", 8.6", 9.25" IFS, 9.5" & Oldsmobile Dropouts. 1 1/4" socket, 7/8" x 14 thread.
Item #: FDHC-YSPPN-018
Condition:
New
Price: $10.89
Description: Pinion nut washer for GM 7.2" IFS, 7.5", 7.6", 7.6" IFS, 8.5", 8.6" & 9.5".
Item #: FDHC-YSPPN-033
Condition:
New
Price: $13.89
Description: Posi shim kit for GM 7.5" & 7.625" Eaton Positraction
Item #: FDHC-YPKGM7.5-PC-SHI
Condition:
New
Price: $31.89
Description: Posi spring kit for GM 7.5", with preload plates
Item #: FDHC-YSPSPR-002
Condition:
New
Price: $172.89
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement Carrier shim kit for Dana Spicer 44, 30 spline axles
Item #: FDHC-SK 30214
Condition:
New
Price: $16.89
Description: Ring gear bolt for GM 7.5", 7.6", 7.6" IRS, 8.0", 8.25" IFS, 8.5", 8.6" & 8.6" IRS. 7/16" x 20.
Item #: FDHC-YSPBLT-019
Condition:
New
Price: $6.89
Description: Standard open pinion gear thrust washer for 7.2" GM.
Item #: FDHC-YSPTW-038
Condition:
New
Price: $11.89
Description: Standard open side gear thrust washer for 7.2" GM.
Item #: FDHC-YSPTW-037
Condition:
New
Price: $20.89
Description: Steel cover for GM 7.5" & 7.625"
Item #: FDHC-YP C5-GM7.5
Condition:
New
Price: $61.89
Description: Super Carrier Shim kit for Ford 7.5", GM 7.5", 8.2" & 8.5"
Item #: FDHC-SK SS10
Condition:
New
Price: $42.89
Description: Thrust washer kit for GM 7.2" IFS stub shaft
Item #: FDHC-YSPTW-067
Condition:
New
Price: $44.89
Description: U/joint strap bolt for 14T, 7.5", and 8.5" GM.
Item #: FDHC-YSPBLT-074
Condition:
New
Price: $13.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
Description: Geared for the installer, this quality Yukon kit is a true time-saver. It includes a carrier bearing puller, axle bearing puller, housing spreader, and a highly effective Yukon Multi-Shim Driver (YT SD-01).
Item #: FDHC-YT KIT-1
Condition:
New
Price: $2,460.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM7.5-B
Condition:
New
Price: $295.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM7.2IFS-A
Condition:
New
Price: $455.89
Description: Yukon Mechanics 3R Lifetime Series U/Joint. 2.556" span ring span, 1.125" cap diameter. Inside snap ring.
Item #: FDHC-YUJ795
Condition:
New
Price: $62.89
Description: Yukon Mechanics 3R U/Joint. 2.556" snap ring span, 1.125" cap diameter. Inside snap ring.
Item #: FDHC-YUJ3147
Condition:
New
Price: $42.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM7.2IFS-E
Condition:
New
Price: $36.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM7.5-A
Condition:
New
Price: $109.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM7.2IFS-E
Condition:
New
Price: $181.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK GM7.5-B
Condition:
New
Price: $189.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-HM89249
Condition:
New
Price: $108.89
Description: Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set.
Item #: FDHC-YPKGM7.5-P-28
Condition:
New
Price: $268.89
Description: Yukon spider gear set for GM 7.5" & 7.625" Dura Grip Posi, 26 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.
Item #: FDHC-YPKGM7.5-P-26
Condition:
New
Price: $268.89
Description: Yukon standard open carrier case, GM 7.625", 3.23 & up
Item #: FDHC-YC G26033477
Condition:
New
Price: $345.89
Description: 7.625" GM standard Open case, 3.23 & up, Large & SM windows, loaded. 28 Spline.
Item #: FDHC-YC G74038615
Condition:
New
Price: $490.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKGM7.2IFS-S
Condition:
New
Price: $217.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKGM7.625-S-28
Condition:
New
Price: $175.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKGM7.5-S-26
Condition:
New
Price: $146.89
Description: Each driver is contoured to the shim’s outside diameter to apply even, uniform force. No more chipping shims or hammering screwdrivers to set your shims. A few dead blows with a ball-peen hammer is all it takes. No returns.
Item #: FDHC-YT SD-01
Condition:
New
Price: $182.89
Sale: $85.00
Save: 54%
Save: $97.89
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89
Description: Yukon yoke for GM 7.2". All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY GM14039582
Condition:
New
Price: $255.89
Description: Yukon yoke for GM 7.5" and 7.625" (mech 3R) in a triple lip design. 2.556" snap ring span, 1.125" cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY GM40015850
Condition:
New
Price: $140.89
Description: Yukon yoke for GM 7.5" (mech 3R) in a triple lip design. 2.556" snap ring span, 1.125" cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY GM7827670
Condition:
New
Price: $179.89