- Home »
- Catalog
Complete Offroad » 1986, Wagoneer
Products for:
- Year: 1986
- Model: Wagoneer
View Universal items for: 1986 Wagoneer
Browse Products
Description: True-Trac limited slip for Dana Spicer 44 REAR with 30 spline axles. Fits 3.73 and down. The True Trac limited slip uses a worm-gear design to bias torque from one tire to the other, providing...More Details »
Item #: 913A589
Condition:
New
Price: $670.01
Description: True-Trac limited slip for Dana Spicer 44 REAR with 30 spline axles. Fits 3.92 and up. The True Trac limited slip uses a worm-gear design to bias torque from one tire to the other, providing...More Details »
Item #: 913A590
Condition:
New
Price: $622.52
Description: DANA SPICER 3.25 CAP TO CAP, 1-1/16" CAP DIAMETER, FOR 1310 YOKES.
Item #: DS U-153
Condition:
New
Price: $21.22
Description: MATES A 1310 YOKE TO A 1330 YOKE
4)1-1/16" caps
3.24" cap to cap and
3.63" cap to cap
Item #: DS U-134
Condition:
New
Price: $33.53
Description: DANA SPICER
3.62 CAP TO CAP
4)1-1/16" CAPS
internal snap rings
Item #: DS U-1203
Condition:
New
Price: $28.59
Description: MATES A 1330 (1 1/16" cap) YOKE TO A 1350 YOKE.
2)1.186" caps
2)1-1/16" caps
3.63" cap to cap
Item #: DS U-648
Condition:
New
Price: $83.68
Description: DANA SPICER
4)1.184" caps
3.63" cap to cap
Item #: DS U-178
Condition:
New
Price: $31.74
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W38816
Condition:
New
Price: $224.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD44
Condition:
New
Price: $246.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK D44-REAR
Condition:
New
Price: $266.89
Description: The Spartan Locker is a lunchbox locker that delivers reliable, 100% lockup traction at a low cost. It's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap!
Item #: FDHD-SL D44-30
Condition:
New
Price: $710.89
Description: The Spartan Locker is a lunchbox locker that delivers reliable, 100% lockup traction at a low cost. It's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap!
Item #: FDHD-SL M20-29
Condition:
New
Price: $719.89
Description: The Spartan Locker delivers reliable, 100% lockup traction at a low cost. This heavy-duty cross pin shaft is engineered and manufactured to the highest standards.
Item #: FDHD-SL XP-M20
Condition:
New
Price: $56.89
Description: The Spartan Locker delivers reliable, 100% lockup traction at a low cost. This heavy-duty cross pin shaft is engineered and manufactured to the highest standards. Measures .748" outside diameter.
Item #: FDHD-SL XP-D44
Condition:
New
Price: $56.89
Description: Spartan Lockers deliver reliable, 100% lockup traction at a low cost. This Spartan Locker Spring & Pin Kit includes springs, alignment pins, and retainer wires.
Item #: FDHD-SL SPRING-SM
Condition:
New
Price: $28.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W39461
Condition:
New
Price: $275.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKM20
Condition:
New
Price: $188.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD44-REAR
Condition:
New
Price: $194.89
Description: Fits 1988 Jeep Cherokee, Commanche & Wagoneer front with four cylinder engine, Aisen four or five speed manual transmission, 231 transfer case & 3.55 or 4.11 gear ratio. 25 3/4" long from center of u/joint caps.
Item #: FDHD-ZDS9436
Condition:
New
Price: $606.89
Description: Fits '80-'93 Jeep Cherokee, Wagoneer, J10 & J20 front with eight cylinder engine & automatic transmission. 25 3/4" long from center of u/joint caps.
Item #: FDHD-ZDS9436A
Condition:
New
Please Call for Availability
Description: Fits 1988 Jeep Cherokee, Commanche & Wagoneer front with six cylinder engine, automatic transmission, 242 or 231 transfer case & 3.08 gear ratio. 29 1/4" long from center of u/joint caps.
Item #: FDHD-ZDS9438
Condition:
New
Please Call for Availability
Description: Fits '82-'83 Jeep Cherokee, Wagoneer, J10 & J20 front with six cylinder engine & five speed manual transmission. 29 1/4" long from center of u/joint caps.
Item #: FDHD-ZDS9438A
Condition:
New
Please Call for Availability
Description: Fits '82-'83 Jeep Cherokee, Wagoneer, J10 & J20 front with six cylinder engine & automatic transmission. 29 1/4" long from center of u/joint caps.
Item #: FDHD-ZDS9438B
Condition:
New
Please Call for Availability
Description: Fits '85-'86 Jeep Grand Cherokee front with four or five speed transmission. 25 1/16" long from center of u/joint caps.
Item #: FDHD-ZDS9749
Condition:
New
Please Call for Availability
Description: Fits '78-'79 Jeep Wagoneer front with V8 engine & four speed hydramatic transmission. 25 5/16" long from center of u/joint caps.
Item #: FDHD-ZDS9751A
Condition:
New
Please Call for Availability
Description: Fits '90-'94 Jeep Cherokee, Commanche & Wagoneer Dana 44 front with 4.0L engine, Aisen five speed manual transmission & Kanda transfer case. 27 1/16" long from center of u/joint caps.
Item #: FDHD-ZDS9752A
Condition:
New
Price: $590.89
Description: Fits 1979 Jeep Wagoneer, J10 & J20 front with V8 engine & three speed transmission. 20" long from center of u/joint caps.
Item #: FDHD-ZDS9754A
Condition:
New
Please Call for Availability
Description: Fits '74-'77 Jeep Cherokee, Wagoneer, J10 & J20 front with six or eight cylinder engine, four speed automatic transmission & Quadratrac. 24 3/8" long from center of u/joint caps.
Item #: FDHD-ZDS9755
Condition:
New
Price: $596.89
Description: Fits '78-'79 Jeep Wagoneer, J10 & J20 front with six speed engine & four speed automatic transmission. 29" long from center of u/joint caps.
Item #: FDHD-ZDS9756A
Condition:
New
Please Call for Availability
Description: Fits '90-'94 Jeep Cherokee, Commanche & Wagoneer Dana 44 front with 4.0L front with Aisen five speed automatic transmission case & Kanda transfer case. 28 3/4" long from center of u/joint caps.
Item #: FDHD-ZDS9764A
Condition:
New
Price: $590.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24138
Condition:
New
Price: $1,034.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24142
Condition:
New
Price: $1,001.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24146
Condition:
New
Price: $1,089.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24140
Condition:
New
Price: $1,547.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24144
Condition:
New
Price: $1,536.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24148
Condition:
New
Price: $1,486.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W39459
Condition:
New
Price: $191.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W39339
Condition:
New
Price: $345.89
Description: 4340 Chrome Moly replacement axle for Dana 44, Scout & Wagoneer D44, RH Inner, uses 5-760X u/joint. 14.78" long, 30 spline.
Item #: FDHD-ZA W38808
Condition:
New
Price: $213.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W38815
Condition:
New
Price: $223.89
Description: USA Standard Gear open spider gear set for Dana Spicer 44, 30 spline
Item #: FDHD-ZIKD44-S-30
Condition:
New
Price: $200.89
Description: AX5 M/T 5TH & REVERSE SYNCHRO SLEEVE 93 & DOWN .
Item #: FDHD-ZMAX5-15
Condition:
New
Price: $88.89
Description: AX5 M/T 5TH FORK 93 & DOWN .
Item #: FDHD-ZMAX83500637
Condition:
New
Price: $57.89
Description: AX5 M/T 1ST GEAR NEEDLE Bearing SLEEVE .
Item #: FDHD-ZMAX83506026
Condition:
New
Price: $28.89
Description: AX5 M/T 1ST & 2ND FORK & RAIL UPDATE .
Item #: FDHD-ZMAX83500527
Condition:
New
Price: $143.89
Description: AX5 M/T 1ST & 2ND FORK .
Item #: FDHD-ZMAX83502662
Condition:
New
Price: $60.89
Description: AX5 M/T SPRING KEY KIT M/T , 1 & 2 .
Item #: FDHD-ZMAX5-K1
Condition:
New
Price: $16.89
Description: AX5 M/T 3RD & 4TH SLEEVE & FORK .
Item #: FDHD-ZMAX4740236
Condition:
New
Price: $112.89
Description: AX5 M/T INPUT 87 & UP JEEP .
Item #: FDHD-ZMAX5-16B
Condition:
New
Price: $122.89
Description: AX5 M/T 5TH MAINSHAFT GEAR SNAP RING .
Item #: FDHD-ZMAX83500587
Condition:
New
Price: $7.89
Description: AX5 M/T REVERSE GEAR .
Item #: FDHD-ZMAX5-36
Condition:
New
Price: $105.89
Description: AX5 M/T 1ST GEAR 88 & UP 33 TOOTH .
Item #: FDHD-ZMAX5-12A
Condition:
New
Price: $140.89
Description: AX5 M/T 3RD GEAR 88 & UP .
Item #: FDHD-ZMAXG52-11
Condition:
New
Price: $107.89
Description: AX5 M/T SPRING KEY KIT 88 & UP M/T , 3 & 4 .
Item #: FDHD-ZMAX5-K3A
Condition:
New
Price: $14.89
Description: AX5 M/T 2ND MAINSHAFT GEAR 88 & UP .
Item #: FDHD-ZMAX5-21A
Condition:
New
Price: $109.89
Description: AX5 M/T 1ST GEAR NEEDLE Bearing 89 & UP .
Item #: FDHD-ZMAX83506031
Condition:
New
Price: $53.89
Description: AX5 M/T 5TH FORK 93 & UP .
Item #: FDHD-ZMAX4746656
Condition:
New
Price: $52.89
Description: M/T 5TH & REVERSE SLEEVE 93 & UP .
Item #: FDHD-ZMAXG52-15
Condition:
New
Price: $55.89
Description: AX5 M/T 5TH COUNTERSHAFT CLUTCH GEAR .
Item #: FDHD-ZMAXG52-152
Condition:
New
Price: $62.89
Description: AX5 M/T BEARING KIT 1984 W/SYNCHROS .
Item #: FDHD-ZMBK160AWS
Condition:
New
Price: $269.89