- Home »
- Catalog
Complete Offroad » 1986, Chrysler
Products for:
- Year: 1986
- Make: Chrysler
View Universal items for: 1986 Chrysler
Browse Products
Items 61-110 of 110
- Prev
- Page 2 of 2
Description: 3 quarts of 80W90 Phillips 76 conventional gear oil.
Item #: FDHC-OK 3-QRT-CONV
Condition:
New
Price: $39.89
Description: 7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.
Item #: FDHC-YY STR-001
Condition:
New
Price: $39.89
Description: 7290 U-joint strap bolt (one bolt only) for Chrysler 7.25", 8.25", 8.75", 9.25".
Item #: FDHC-YSPBLT-073
Condition:
New
Price: $13.89
Description: 7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25", 8.25", 8.75", and 9.25".
Item #: FDHC-YY C7290-STRAP
Condition:
New
Price: $46.89
Description: 8.25" Chrysler 2.56 & Up Ratio Yukon Dura Grip Limited Slip, 27 Spline, Positraction Composite Clutches
Item #: FDHC-YDGC8.25-27-1
Condition:
New
Price: $711.89
Description: 8.25" Chrysler cover gasket.
Item #: FDHC-YCGC8.25
Condition:
New
Price: $12.89
Description: 8.25" Chrysler notched cross pin shaft for standard open carriers. (0.801" diameter). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers, or with factory Trac Loc positractions.
Item #: FDHC-YSPXP-058
Condition:
New
Price: $88.89
Description: 8.25" Chrysler pinion gear thrust washer.
Item #: FDHC-YSPTW-002
Condition:
New
Price: $23.89
Description: 8.25" Chrysler, Model 35, D36 ICA, & Dana 28 TracLoc clutch set.
Item #: FDHC-YPKC8.25-PC-T/L
Condition:
New
Price: $176.89
Description: ABS tone ring for 8.25" Chrysler.
Item #: FDHC-YSPABS-004
Condition:
New
Price: $61.89
Description: Bolt/screw for adjuster lock for Chrysler 7.25", 8.25", 8.75", 9.25".
Item #: FDHC-YSPBLT-051
Condition:
New
Price: $17.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for '76 & up Chrysler 8.25" rear
Item #: FDHC-CK C8.25-B
Condition:
New
Price: $81.89
Description: Chrysler fine spline pinion nut for Chrysler 7.25", 8", 8.25", 8.75", and 9.25".
Item #: FDHC-YSPPN-038
Condition:
New
Price: $33.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin bolt for 7.25" Chrysler.
Item #: FDHC-YSPBLT-049
Condition:
New
Price: $27.89
Description: Cross pin shaft for 8.25" Chrysler.
Item #: FDHC-YSPXP-003
Condition:
New
Price: $44.89
Description: Cross pin shaft for Chrysler 7.25".
Item #: FDHC-YSPXP-002
Condition:
New
Price: $44.89
Description: Crush Sleeve for Model 35, Chrysler 7.25", 8.25" Ford 8" & GM 7.75". Approx. 0.480" long.
Item #: FDHC-YSPCS-010
Condition:
New
Price: $8.89
Description: Differential carrier side bearing screw adjuster for Chrysler 7.25" and 8.25".
Item #: FDHC-YSPSA-002
Condition:
New
Price: $47.89
Description: Model 35 (standard Open & TracLoc) 8.25" Chrysler TracLoc cross pin bolt.
Item #: FDHC-YSPBLT-048
Condition:
New
Price: $14.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion gear thrust washer for 8" and 9" Ford, Model 20, and 7.25" Chrysler.
Item #: FDHC-YSPTW-031
Condition:
New
Price: $7.89
Description: Pinion nut for Chrysler 7.25", 8.0" IFS, 8.25", 8.75" fine spline, 9.25" front & rear, 7/16" x 14.
Item #: FDHC-YSPPN-008
Condition:
New
Price: $9.89
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement Pinion depth shims for Dana 35, Model 35 & Chrysler 7.25"
Item #: FDHC-SK 31402
Condition:
New
Price: $18.89
Description: Ring gear bolt for Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS front. 3/8" x 24.
Item #: FDHC-YSPBLT-005
Condition:
New
Price: $8.89
Description: Rubber fill plug for Chrysler
Item #: FDHC-YSPFP-03
Condition:
New
Price: $30.89
Description: Side gear thrust washer for 7.25" Chrysler.
Item #: FDHC-YSPTW-009
Condition:
New
Price: $60.89
Description: Steel cover for Chrysler 8.25"
Item #: FDHC-YP C5-C8.25
Condition:
New
Price: $166.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
Description: Geared for the installer, this quality Yukon kit is a true time-saver. It includes a carrier bearing puller, axle bearing puller, housing spreader, and a highly effective Yukon Multi-Shim Driver (YT SD-01).
Item #: FDHC-YT KIT-1
Condition:
New
Price: $2,460.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C8.25-B
Condition:
New
Price: $256.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C7.25
Condition:
New
Price: $251.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C7.25
Condition:
New
Price: $36.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C8.25-B
Condition:
New
Price: $33.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C8.25-B
Condition:
New
Price: $166.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C7.25
Condition:
New
Price: $207.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $149.89
Description: Adjusts the threaded side adjusters for setting backlash and carrier bearing preload. No return.
Item #: FDHC-YT A06
Condition:
New
Price: $185.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKC7.25-S-25
Condition:
New
Price: $236.89
Description: Yukon standard open carrier case for Chrysler 8.25", 29 spline, 2.56 & up, 1997 & up only
Item #: FDHC-YC C52069428
Condition:
New
Price: $509.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKC8.25-S-27
Condition:
New
Price: $292.89
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89
Description: Yukon yoke for Chrysler 7.25" and 8.25" with a 1310 U/joint size. 3.219" snap ring span, 1.062" cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C3723252
Condition:
New
Price: $154.89
Description: Yukon yoke for Chrysler 7.25" and 8.25" with a 7260 U/joint size. 2.125" snap ring span, 1.078" cap diameter. Inside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C3723251
Condition:
New
Price: $286.89
Description: Yukon yoke for Chrysler 7.25" and 8.25" with a 7290 U/joint size. 2.625" snap ring span. 1.125" cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C4137976
Condition:
New
Price: $378.89
Description: Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Item #: FDHC-YY C52068839
Condition:
New
Price: $171.89
Items 61-110 of 110
- Prev
- Page 2 of 2