- Home »
- Catalog
Complete Offroad » 1983, Ford, F-150 1/2 Ton
Products for:
- Year: 1983
- Make: Ford
- Model: F-150 1/2 Ton
View Universal items for: 1983 Ford F-150 1/2 Ton
Browse Products
Description: Restore the precise steering control of your vehicle by replacing its worn and failing ball joints with durable Yukon units. Yukon ball joints are constructed from high-quality materials and engineered to meet or exceed OE specs.
Item #: FDHC-YSPBJ-009
Condition:
New
Price: $176.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8" differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK F8.8
Condition:
New
Price: $123.89
Description: Chrome cover for 8.8" Ford.
Item #: FDHC-YP C1-F8.8
Condition:
New
Price: $65.89
Description: Chrome Moly cross pin shaft for Mini-Spool for 9" Ford HD.
Item #: FDHC-YP MINSXF9
Condition:
New
Price: $53.89
Description: Dana 44, Dana 60, & 9.25" TracLoc clutch clip / guide
Item #: FDHC-YSPCG-001
Condition:
New
Price: $9.89
Description: CLAMPS, 3.062" Yukon Ford 9" Drop Out new design ONLY.
Item #: FDHC-YP DOF9-03
Condition:
New
Price: $13.89
Description: CLAMPS, 3.250" Yukon Ford 9" Drop Out new design ONLY.
Item #: FDHC-YP DOF9-04
Condition:
New
Price: $13.89
Description: Cover bolt for Ford 7.5", 8.8" & 9.75"
Item #: FDHC-YSPBLT-079
Condition:
New
Price: $7.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft (0.875") for '86 and newer 8.8" Ford.
Item #: FDHC-YSPXP-026
Condition:
New
Price: $42.89
Description: Crush Sleeve for Model 20, Ford 10.25", 10.5", 7.5", 8.8", 9 3/8", 9" & 9.75". .480" long.
Item #: FDHC-YSPCS-002
Condition:
New
Price: $10.89
Description: 2 piece solid spacer for Ford 8.8 and 7.5.
Item #: FDHC-SK CSF8.8
Condition:
New
Price: $83.89
Description: 9" Ford 2 piece solid preload pinion spacer, Daytona or standard.
Item #: FDHC-SK CSF9-2PIECE
Condition:
New
Price: $70.89
Description: 9" large solid pinion preload spacer & shim kit for 35 spline pinion.
Item #: FDHC-SK CSF9-BIGPIN
Condition:
New
Price: $133.89
Description: Replacement pinion seal for Dana 25, Dana 27, Dana 30, D36, Dana 44, & Dana 50 .Yukon Mighty seal.
Item #: FDHC-YMS5778
Condition:
New
Price: $18.89
Description: Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Item #: FDHC-YSPPN-029
Condition:
New
Price: $6.89
Description: Replacement inner oil slinger for Dana 25, 27, 30, 44 & 50
Item #: FDHC-YSPBF-013
Condition:
New
Price: $7.89
Description: Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside axle snap ring (next to side gear).
Item #: FDHC-YSPSR-007
Condition:
New
Price: $7.89
Description: Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Item #: FDHC-YSPSR-005
Condition:
New
Price: $8.89
Description: Dana 30 & Dana 44 roll PIN, 0.235" DIA, for cross pin shaft.
Item #: FDHC-YSPXP-007
Condition:
New
Price: $9.89
Description: Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Item #: FDHC-YPKD44-PC-T/L
Condition:
New
Price: $129.89
Description: Dana 44 3.73 & Down Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-3-30-1
Condition:
New
Price: $820.89
Description: Dana 44 3.92 & Up Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-4-30-1
Condition:
New
Price: $819.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D44
Condition:
New
Price: $127.89
Description: Replacement complete shim kit for Dana 44
Item #: FDHC-SK 706376
Condition:
New
Price: $50.89
Description: Replacement cover gasket. For Dana 44
Item #: FDHC-YCGD44
Condition:
New
Price: $12.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-4-30
Condition:
New
Price: $966.89
Description: Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the best in heat-treating...More Details »
Item #: FDHC-YA D39905
Condition:
New
Price: $272.89
Description: Yukon replacement outer stub axle shaft for Dana 44 IFS with a length of 9.8 inches and with 19 splines. Yukon front axles come with a one year warranty against manufacturing defects.
Item #: FDHC-YA D39906
Condition:
New
Price: $220.89
Description: Dana 44 pinion gear standard Open.
Item #: FDHC-YPKD44-PG-01
Condition:
New
Price: $51.89
Description: Dana 44, GM55P & 8.2" GM pinion gear Thrust washer.
Item #: FDHC-YSPTW-011
Condition:
New
Price: $7.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD44-S-30
Condition:
New
Price: $208.89
Description: Replacement side gear thrust washer for Dana 44, Model 20, and Ford 8" & 9"
Item #: FDHC-YSPTW-013
Condition:
New
Price: $6.89
Description: Drive Flange Cap for Dana 44
Item #: FDHC-YP DFC-SM-B
Condition:
New
Price: $109.89
Description: Drive Flange Cap for Dana 44, Yukon Engraved
Item #: FDHC-YP DFC-SM-Y
Condition:
New
Price: $109.89
Description: Drive flange, 19 spline inner, 48 spline outer.
Item #: FDHC-YHCDF-19-A
Condition:
New
Price: $121.89
Description: Fill plug for Ford 9", 1/2" thread
Item #: FDHC-YSPFP-01
Condition:
New
Price: $12.89
Description: Fine thread pinion support bolt (aftermarket aluminum only) for 9" Ford.
Item #: FDHC-YSPBLT-061
Condition:
New
Price: $8.89
Description: Flat side gear without hub for 8" and 9" Ford with 28 splines.
Item #: FDHC-YPKF9-SG-04
Condition:
New
Price: $48.89
Description: Flat side gear without hub for 9" Ford with 31 splines.
Item #: FDHC-YPKF9-SG-02
Condition:
New
Price: $44.89
Description: Ford 7.5" & 8.8" ring gear bolt, standard Open & TracLoc. 7/16" x 20.
Item #: FDHC-YSPBLT-024
Condition:
New
Price: $7.89
Description: Ford 7.5", 8", 8.8", & 9" axle stud.
Item #: FDHC-YSPSTUD-005
Condition:
New
Price: $7.89
Description: Ford 8" & 9" standard Open, AG, & Detroit locker ring gear bolt, 1.0" long, Ford.
Item #: FDHC-YSPBLT-013
Condition:
New
Price: $7.89
Description: Ford 8" & 9" standard Open, AG, & Detroit locker ring gear bolt. 7/16" head, .925" long.
Item #: FDHC-YSPBLT-029
Condition:
New
Price: $8.89
Description: Ford 8" & 9" TracLoc ring gear bolt, 1-1/4" long.
Item #: FDHC-YSPBLT-014
Condition:
New
Price: $6.89
Description: Nodular Daytona style pinion support, Heavy Duty, includes races 9" Ford.
Item #: FDHC-YP F9PS-4
Condition:
New
Price: $207.89
Description: Nodular Daytona style pinion support, Heavy Duty, 9" Ford. (No races)
Item #: FDHC-YP F9PS-4-BARE
Condition:
New
Price: $157.89
Description: Ford 9" pinion Support, 35 spline, 10 hole, no races included.
Item #: FDHC-YP F9PS-5
Condition:
New
Price: $565.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP DOF9-3-306
Condition:
New
Price: $771.89
Description: Yukon aluminum dropouts feature an adjuster lock which is offset 90 degrees, offering an uninterrupted bearing cap for higher strength. Made from A356-T6 aluminum and featuring a through-bolt design, this dropout is rated at 1,000 hp.
Item #: FDHC-YP DOF9-3-325
Condition:
New
Price: $720.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-308
Condition:
New
Price: $427.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-327
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-331
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-355
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-373
Condition:
New
Price: $406.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-411
Condition:
New
Price: $401.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-430
Condition:
New
Price: $501.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-456
Condition:
New
Price: $464.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F8.8-488
Condition:
New
Price: $476.89