- Home »
- Catalog
Complete Offroad » 1983, Chevrolet / Chevy, S10 Blazer / Pickup
Products for:
- Year: 1983
- Make: Chevrolet / Chevy
- Model: S10 Blazer / Pickup
View Universal items for: 1983 Chevrolet / Chevy S10 Blazer / Pickup
Browse Products
Description: 7.2" shifter seal. Yukon Mighty seal.
Item #: FDHC-YMSG1014
Condition:
New
Please Call for Availability
Description: 7.2" stub axle seal. Yukon Mighty seal.
Item #: FDHC-YMSG1010
Condition:
New
Price: $49.89
Description: 7.2IFS GM Standard Open loaded case 3.23 & up.
Item #: FDHC-YC G46002013
Condition:
New
Price: $449.89
Description: 7.5 & 7.625 Standard Open Pinion gear Thrust Washer.
Item #: FDHC-YSPTW-052
Condition:
New
Price: $10.89
Description: 7.5 GM cover gasket.
Item #: FDHC-YCGGM7.5
Condition:
New
Price: $12.89
Description: 7.5" and 8.5" GM rear U/joint strap, Mech 3R.
Item #: FDHC-YY STR-008
Condition:
New
Price: $27.89
Description: 7.5" &7.625" GM 3.23 & Up Yukon Dura Grip Limited Slip, 26 Spline Positraction Composite Clutches
Item #: FDHC-YDGGM7.5-3-26-SM
Condition:
New
Price: $770.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2" & 8.5" differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK GM8.5
Condition:
New
Please Call for Availability
Description: Adjuster lock bolt for left hand case half of 7.2" and 9.25" GM IFS.
Item #: FDHC-YSPBLT-062
Condition:
New
Price: $19.89
Description: Aluminum girdle cover for GM 7.5" & 7.625"
Item #: FDHC-YP C3-GM7.5
Condition:
New
Price: $368.89
Description: Axle seal for 5707 OR 1563 bearing. Yukon Mighty seal.
Item #: FDHC-YMS8660S
Condition:
New
Price: $7.89
Description: C/clip for GM 7.5", 7.6" & 8"
Item #: FDHC-YSPCC-009
Condition:
New
Price: $17.89
Description: Chrome cover for 7.5" GM.
Item #: FDHC-YP C1-GM7.5
Condition:
New
Price: $61.89
Description: Clutch guide for GM 7.5" & 7.6" Yukon Dura Grip
Item #: FDHC-YSPCG-004
Condition:
New
Price: $13.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin shaft for 7.2" GM.
Item #: FDHC-YSPXP-035
Condition:
New
Price: $52.89
Description: Cross pin shaft for 7.5", 7.625", and 8" GM.
Item #: FDHC-YSPXP-036
Condition:
New
Price: $48.89
Description: Crush sleeve for GM 7.5", 7.6", 7.6" IFS, 8.0", 8.2" & 8.2" Buick/Old's/Pontiac. .625" long.
Item #: FDHC-YSPCS-027
Condition:
New
Price: $7.89
Description: Crush sleeve eliminator kit for GM 7.5" & 8.2"
Item #: FDHC-SK CSGM7.5
Condition:
New
Price: $50.89
Description: 5/16"-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5", 7.625", 8.2", 8.5", 12 bolt passenger car and truck.
Item #: FDHC-YSPBLT-075
Condition:
New
Price: $6.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $15.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $10.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-342T
Condition:
New
Price: $448.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-373T
Condition:
New
Price: $473.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-411T
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-273
Condition:
New
Price: $495.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-308
Condition:
New
Price: $442.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-323
Condition:
New
Price: $402.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-342
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-373
Condition:
New
Price: $543.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-411
Condition:
New
Price: $473.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-430
Condition:
New
Price: $620.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-456
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.2-342R
Condition:
New
Price: $508.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.2-373R
Condition:
New
Price: $508.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.2-411R
Condition:
New
Price: $508.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.2-456R
Condition:
New
Price: $434.89
Description: Inner axle retaining snap ring for 7.2" GM.
Item #: FDHC-YSPSR-011
Condition:
New
Price: $10.89
Description: Cover bolt for GM 7.25, 7.6, 8.0, 8.6, 9.25, 9.5, 14T & 11.5
Item #: FDHC-YSPBLT-082
Condition:
New
Price: $7.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSGM7.5-26
Condition:
New
Price: $303.89
Description: Notched cross pin shaft for 7.5" GM. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Item #: FDHC-YSPXP-054
Condition:
New
Please Call for Availability
Description: 8" Toyota, 7.5" GM, 8.2" GM, 12T, pinion shim set, & Mazda truck.
Item #: FDHC-SK T8
Condition:
New
Price: $31.89
Description: Pinion depth shims for 7.5" GM, 7.75" GM, 8.2" GM, 12T, & other
Item #: FDHC-SK 21104
Condition:
New
Price: $24.89
Description: Pinion nut for GM 7.2" IFS, 7.5", 7.6", 7.6" IFS, 8.0", 8.25", 8.5", 8.6", 9.25" IFS, 9.5" & Oldsmobile Dropouts. 1 1/4" socket, 7/8" x 14 thread.
Item #: FDHC-YSPPN-018
Condition:
New
Price: $10.89
Description: Pinion nut washer for GM 7.2" IFS, 7.5", 7.6", 7.6" IFS, 8.5", 8.6" & 9.5".
Item #: FDHC-YSPPN-033
Condition:
New
Price: $13.89
Description: Posi shim kit for GM 7.5" & 7.625" Eaton Positraction
Item #: FDHC-YPKGM7.5-PC-SHI
Condition:
New
Please Call for Availability
Description: Posi spring kit for GM 7.5", with preload plates
Item #: FDHC-YSPSPR-002
Condition:
New
Price: $172.89
Description: Replacement Carrier shim kit for Dana Spicer 44, 30 spline axles
Item #: FDHC-SK 30214
Condition:
New
Price: $16.89
Description: Ring gear bolt for GM 7.5", 7.6", 7.6" IRS, 8.0", 8.25" IFS, 8.5", 8.6" & 8.6" IRS. 7/16" x 20.
Item #: FDHC-YSPBLT-019
Condition:
New
Price: $6.89
Description: Standard open pinion gear thrust washer for 7.2" GM.
Item #: FDHC-YSPTW-038
Condition:
New
Price: $11.89
Description: Standard open side gear thrust washer for 7.2" GM.
Item #: FDHC-YSPTW-037
Condition:
New
Price: $20.89
Description: Steel cover for GM 7.5" & 7.625"
Item #: FDHC-YP C5-GM7.5
Condition:
New
Price: $61.89
Description: Super Carrier Shim kit for Ford 7.5", GM 7.5", 8.2" & 8.5"
Item #: FDHC-SK SS10
Condition:
New
Price: $42.89
Description: Thrust washer kit for GM 7.2" IFS stub shaft
Item #: FDHC-YSPTW-067
Condition:
New
Price: $44.89
Description: U/joint strap bolt for 14T, 7.5", and 8.5" GM.
Item #: FDHC-YSPBLT-074
Condition:
New
Price: $13.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-456K
Condition:
New
Price: $457.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM7.5-B
Condition:
New
Price: $295.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM7.2IFS-A
Condition:
New
Price: $455.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM7.2IFS-E
Condition:
New
Price: $36.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK GM7.5-A
Condition:
New
Price: $109.89