- Home »
- Catalog
Complete Offroad » 1982, Dodge, W100 1/2 Ton 4x4
Products for:
- Year: 1982
- Make: Dodge
- Model: W100 1/2 Ton 4x4
View Universal items for: 1982 Dodge W100 1/2 Ton 4x4
Browse Products
Description: O-ring for Toyota & Dana 44 ZIP locker seal housing
Item #: FDHC-YZLAO-01
Condition:
New
Price: $11.89
Description: O-ring for Yukon Zip Locker Bulkhead fitting kit
Item #: FDHC-YZLAO-05
Condition:
New
Price: $12.89
Description: Outer stub thrust washer for Dana 30 & 44
Item #: FDHC-YSPTW-075
Condition:
New
Price: $10.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion nut for Chrysler 7.25", 8.0" IFS, 8.25", 8.75" fine spline, 9.25" front & rear, 7/16" x 14.
Item #: FDHC-YSPPN-008
Condition:
New
Price: $9.89
Description: Power Lok Belleville clutch plate, splined
Item #: FDHC-YPKD44-PC-04
Condition:
New
Price: $31.89
Description: Power Lok drive Belleville plate for Dana 44
Item #: FDHC-YPKD44-PC-01
Condition:
New
Price: $37.89
Description: Power Lok flat drive plate for Dana 44
Item #: FDHC-YPKD44-PC-02
Condition:
New
Price: $25.89
Description: Power Lok flat driven plate for Dana 44
Item #: FDHC-YPKD44-PC-03
Condition:
New
Price: $25.89
Description: Pump up kit, Zip Locker.
Item #: FDHC-YZLPUK
Condition:
New
Price: $170.89
Description: Replacement Carrier shim kit for Dana Spicer 44, 30 spline axles
Item #: FDHC-SK 30214
Condition:
New
Price: $16.89
Description: 0.080" thick Chrome replacement cover for Dana 44.
Item #: FDHC-YP C1-D44-STD
Condition:
New
Price: $61.89
Description: Replacement clutch set for Dana 44 Power Lok, aggressive
Item #: FDHC-YPKD44-PC-AG
Condition:
New
Price: $229.89
Description: Replacement clutch set for Dana 44 Power Lok, smooth
Item #: FDHC-YPKD44-PC-SM
Condition:
New
Price: $176.89
Description: Replacement cross pin shaft for Dana 44, Standard Open
Item #: FDHC-YSPXP-013
Condition:
New
Price: $17.89
Description: Replacement floater roll pin for Dana 44 & 8.75" Chrysler Power Lok
Item #: FDHC-YSPXP-021
Condition:
New
Price: $9.89
Description: Replacement oil baffle for Dana 44
Item #: FDHC-YSPBF-001
Condition:
New
Price: $7.89
Description: Replacement outer oil slinger for Dana 25, 27, 30, 44 & 50
Item #: FDHC-YSPBF-012
Condition:
New
Price: $7.89
Description: Replacement pinion nut for Dana 25, 27, 30, 36, 44, 53 & GM 7.75"
Item #: FDHC-YSPPN-009
Condition:
New
Price: $7.89
Description: Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8" x 24.
Item #: FDHC-YSPBLT-008
Condition:
New
Price: $10.89
Description: Ring gear bolt for Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS front. 3/8" x 24.
Item #: FDHC-YSPBLT-005
Condition:
New
Price: $8.89
Description: Seal housing for Dana 44, Zip locker, with O-rings
Item #: FDHC-YZLASH-03
Condition:
New
Price: $77.89
Description: Spindle bearing for Dana 44. This replaces Spicer part number 550759.
Item #: FDHC-YSPSP-020
Condition:
New
Price: $25.89
Description: Spindle bearing seal for Dana 30 & 44. This replaces Spicer part number 36361.
Item #: FDHC-YSPSP-009
Condition:
New
Price: $11.89
Description: Spindle nut for Dana 30 & Dana 44, .372" thick. This replaces Spicer part number 21588X.
Item #: FDHC-YSPSP-001
Condition:
New
Price: $22.89
Description: Steel cover for Chrysler 8.25"
Item #: FDHC-YP C5-C8.25
Condition:
New
Price: $166.89
Description: Steel cover for Dana 44 standard rotation
Item #: FDHC-YP C5-D44-STD
Condition:
New
Price: $117.89
Description: ZIP locker front switch cover.
Item #: FDHC-YZLASC-F
Condition:
New
Price: $9.89
Description: Zip Locker solenoid valve.
Item #: FDHC-YZLASV-01
Condition:
New
Price: $92.89
Description: ZIP locker switch.
Item #: FDHC-YZLASW-01
Condition:
New
Price: $15.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-3-30
Condition:
New
Price: $999.89
Description: Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Non-engraved caps..
Item #: FDHC-YHC50008
Condition:
New
Price: $457.89
Description: Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Yukon engraved caps.
Item #: FDHC-YHC50007
Condition:
New
Price: $457.89
Description: Yukon hardcore drive flange kit for Dana 44, 30 spline outer stubs. Non-engraved caps.
Item #: FDHC-YHC50002
Condition:
New
Price: $457.89
Description: Yukon hardcore drive flange kit for Dana 44, 30 spline outer stubs. Yukon engraved caps.
Item #: FDHC-YHC50001
Condition:
New
Price: $457.89
Description: Drive flange, 30 spline inner, 48 spline outer.
Item #: FDHC-YHCDF-30-A
Condition:
New
Price: $121.89
Description: Yukon Hardcore Locking Hubs feature Chromoly internals and all steel construction for ultimate durability & strength. These hubs won’t disengage under high torque applications and default to the locked position in use.
Item #: FDHC-YHC70005
Condition:
New
Price: $581.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D44
Condition:
New
Price: $373.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C8.25-B
Condition:
New
Price: $256.89
Description: Front wheel seal. Yukon Mighty seal.
Item #: FDHC-YMS471271
Condition:
New
Price: $10.89
Description: Inner front disco replacement seal for 4WD Dana 44, Dana 60, and 8.5" straight axle. Yukon Mighty seal.
Item #: FDHC-YMS5131
Condition:
New
Price: $12.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C8.25-B
Condition:
New
Price: $33.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK D44
Condition:
New
Price: $132.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C8.25-B
Condition:
New
Price: $166.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK D44
Condition:
New
Price: $281.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $149.89
Description: Yukon Positraction internals for Dana 44 Dura Grip Posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Power Lok. Fits Dura Grip ONLY.
Item #: FDHC-YPKD44-P-30
Condition:
New
Price: $392.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD44-P/L-30
Condition:
New
Price: $487.89
Description: Yukon rebuild kit for Dana 44 Super Joint, ONE JOINT ONLY
Item #: FDHC-YP SJ-ACC-501
Condition:
New
Price: $140.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-513T
Condition:
New
Price: $496.89
Description: Yukon replacement standard open carrier case for Dana 44, 3.92 & up, 2-3/8" tall.
Item #: FDHC-YC D706025
Condition:
New
Price: $139.89
Description: Yukon replacement standard open carrier case for Dana 44, 30 spline, 3.73 & down, 2-1/8" tall.
Item #: FDHC-YC D706024
Condition:
New
Price: $195.89
Description: Yukon replacement case for Dana 44, 3.92 & up, bare.
Item #: FDHC-YC D707151
Condition:
New
Price: $287.98
Description: Adjusts the threaded side adjusters for setting backlash and carrier bearing preload. No return.
Item #: FDHC-YT A06
Condition:
New
Price: $185.89
Description: Yukon replacement standard open carrier case for Dana 44, 30 spline, 3.73 & down, bare. This case includes carrier shims, roll pin, ring gear bolts and a cover gasket.
Item #: FDHC-YC D706024-X
Condition:
New
Price: $203.89
Description: Yukon replacement standard open carrier case for Dana 44, 30 spline, 3.92 & up, bare. This case includes carrier shims, roll pin, ring gear bolts and a cover gasket.
Item #: FDHC-YC D706025-X
Condition:
New
Price: $184.89
Description: Yukon standard open carrier case for Chrysler 8.25", 29 spline, 2.56 & up, 1997 & up only
Item #: FDHC-YC C52069428
Condition:
New
Price: $509.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKC8.25-S-27
Condition:
New
Price: $292.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP FSD44-4-30UP
Condition:
New
Price: $351.89
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89