- Home »
- Catalog
Complete Offroad » Chrysler
Products for:
- Make: Chrysler
View Universal items for: Chrysler
Browse Products
Description: 7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25", 8.25", 8.75", and 9.25".
Item #: FDHC-YY C7290-STRAP
Condition:
New
Price: $46.89
Description: Yukon Gear & Axle Inner Axle Snap Ring for 8.0" IFS Chrysler
Item #: FDHC-YSPSR-020
Condition:
New
Price: $14.89
Description: 8.25" Chrysler 2.56 & Up Ratio Yukon Dura Grip Limited Slip, 27 Spline, Positraction Composite Clutches
Item #: FDHC-YDGC8.25-27-1
Condition:
New
Price: $711.89
Description: 8.25" Chrysler cover gasket.
Item #: FDHC-YCGC8.25
Condition:
New
Price: $12.89
Description: 8.25" Chrysler notched cross pin shaft for standard open carriers. (0.801" diameter). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers, or with factory Trac Loc positractions.
Item #: FDHC-YSPXP-058
Condition:
New
Price: $88.89
Description: 8.25" Chrysler pinion gear thrust washer.
Item #: FDHC-YSPTW-002
Condition:
New
Price: $23.89
Description: 8.25" Chrysler, Model 35, D36 ICA, & Dana 28 TracLoc clutch set.
Item #: FDHC-YPKC8.25-PC-T/L
Condition:
New
Price: $176.89
Description: Yukon Gear & Axle 8.25"/ 213mm CHRYSLER, 3.07 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package
Item #: FDHC-YGK2199
Condition:
New
Price: $799.89
Yukon Gear and Axle 8.25"/ 213mm CHY 3.07 Rear Ring & Pinion, Install Kit, 29 Spline Posi, - YGK2204
Description: Yukon Gear & Axle 8.25" CHRYSLER, 3.07 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 29 Spline Yukon Dura Grip Limited Slip Positraction
Item #: FDHC-YGK2204
Condition:
New
Price: $1,399.89
Description: Yukon Gear & Axle 8.25"/ 213mm CHRYSLER, 3.55 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package
Item #: FDHC-YGK2200
Condition:
New
Price: $672.89
Yukon Gear and Axle 8.25"/ 213mm CHY 3.55 Rear Ring & Pinion, Install Kit, 29 Spline Posi, - YGK2205
Description: Yukon Gear & Axle 8.25" CHRYSLER, 3.55 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 29 Spline Yukon Dura Grip Limited Slip Positraction
Item #: FDHC-YGK2205
Condition:
New
Price: $1,299.89
Description: Yukon Gear & Axle 8.25"/ 213mm CHRYSLER, 3.73 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package
Item #: FDHC-YGK2201
Condition:
New
Price: $672.89
Yukon Gear and Axle 8.25"/ 213mm CHY 3.73 Rear Ring & Pinion, Install Kit, 29 Spline Posi, - YGK2206
Description: Yukon Gear & Axle 8.25" CHRYSLER, 3.73 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 29 Spline Yukon Dura Grip Limited Slip Positraction
Item #: FDHC-YGK2206
Condition:
New
Price: $1,346.89
Description: Yukon Gear & Axle 8.25"/ 213mm CHRYSLER, 3.90 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package
Item #: FDHC-YGK2202
Condition:
New
Price: $657.89
Yukon Gear and Axle 8.25"/ 213mm CHY 3.91 Rear Ring & Pinion, Install Kit, 29 Spline Posi, - YGK2207
Description: Yukon Gear & Axle 8.25" CHRYSLER, 3.90 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 29 Spline Yukon Dura Grip Limited Slip Positraction
Item #: FDHC-YGK2207
Condition:
New
Price: $1,299.89
Description: Yukon Gear & Axle 8.25"/ 213mm CHRYSLER, 4.11 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package
Item #: FDHC-YGK2203
Condition:
New
Price: $672.89
Yukon Gear and Axle 8.25"/ 213mm CHY 4.11 Rear Ring & Pinion, Install Kit, 29 Spline Posi, - YGK2208
Description: Yukon Gear & Axle 8.25" CHRYSLER, 4.11 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 29 Spline Yukon Dura Grip Limited Slip Positraction
Item #: FDHC-YGK2208
Condition:
New
Price: $1,299.89
Description: 8.75" Chrysler & 55P Chevy Power Lok clutches, Model 20 also, POSI.
Item #: FDHC-YPKC8.75-PC
Condition:
New
Price: $259.89
Description: 8.75" Chrysler gasket.
Item #: FDHC-YCGC8.75
Condition:
New
Price: $12.89
Description: 9.25" Chrysler C/clip, 0.175" narrow for small button
Item #: FDHC-YSPCC-001
Condition:
New
Price: $33.89
Description: 9.25" Chrysler C/clip, 0.205" wide for 4137429 axle.
Item #: FDHC-YSPCC-002
Condition:
New
Price: $19.89
Yukon Gear and Axle 9.25" Chrysler Dura Grip Limited Slip, 31spl, Composite Clutches - YDGC9.25-31-1
Description: Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains.
Item #: FDHC-YDGC9.25-31-1
Condition:
New
Price: $836.89
Description: 9.25" Chrysler rear cover gasket.
Item #: FDHC-YCGC9.25
Condition:
New
Price: $12.89
Description: 9.25" Chrysler, Dana 60 semi-float X/P bolt, 80 & up, 5/16" head, tapered shoulder
Item #: FDHC-YSPBLT-056
Condition:
New
Price: $12.89
Description: 9.25" cross pin shaft TracLoc ONLY, not standard Open 0.870" DIA.
Item #: FDHC-YSPXP-005
Condition:
New
Price: $49.89
Description: 9.25" pinion gear thrust washer.
Item #: FDHC-YSPTW-004
Condition:
New
Price: $14.89
Description: ABS tone ring for 8.25" Chrysler.
Item #: FDHC-YSPABS-004
Condition:
New
Price: $61.89
Description: Axle O-ring for 8" Chrysler IFS.
Item #: FDHC-YSPO-001
Condition:
New
Price: $17.89
Description: AXLE STUD , 2 5/16" X 9/16-18 .
Item #: FDHC-YSPSTUD-032
Condition:
New
Price: $8.89
Description: Bolt/screw for adjuster lock for Chrysler 7.25", 8.25", 8.75", 9.25".
Item #: FDHC-YSPBLT-051
Condition:
New
Price: $17.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: C198 & C210 crush sleeve. Approx. 0.550" long.
Item #: FDHC-YSPCS-046
Condition:
New
Price: $35.89
Description: C198 ring gear bolt.
Item #: FDHC-YSPBLT-040
Condition:
New
Price: $15.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for '76 & up Chrysler 8.25" rear
Item #: FDHC-CK C8.25-B
Condition:
New
Price: $81.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Chrysler 9.25" rear differential. This kit contains carrier bearings and races.
Item #: FDHC-CK C9.25-R
Condition:
New
Price: $177.89
Description: Chrome cover for 9.25" Chrysler.
Item #: FDHC-YP C1-C9.25
Condition:
New
Price: $75.89
Description: Chrysler 8.75 "89" case Crush Sleeve. Approx. 3.000" long.
Item #: FDHC-YSPCS-009
Condition:
New
Price: $20.89
Description: 89 housing nodular Iron Drop Out case, up to 500 HP, Billet adjuster for 8.75" Chrysler. This dropout does not come with fill plug (Part number CHY612017).
Item #: FDHC-YP DOC8.89
Condition:
New
Price: $645.89
Description: Chrysler 8.75" (coarse spline) pinion nut washer.
Item #: FDHC-YSPPN-028
Condition:
New
Price: $13.89
Description: Chrysler 8.75" (coarse spline) pinion nut. 3/4" x 16.
Item #: FDHC-YSPPN-002
Condition:
New
Price: $9.89
Description: Dana 44, Dana 60, & 9.25" TracLoc clutch clip / guide
Item #: FDHC-YSPCG-001
Condition:
New
Price: $9.89
Description: Chrysler 9.25" Dura Grip case, bare.
Item #: FDHC-YC C9.25-DG
Condition:
New
Price: $396.89
Description: Chrysler fine spline pinion nut for Chrysler 7.25", 8", 8.25", 8.75", and 9.25".
Item #: FDHC-YSPPN-038
Condition:
New
Price: $33.89
Description: Chrysler/Mercedes differential pinion yoke W/O V8 engine. Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C198-B
Condition:
New
Price: $403.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Cross pin bolt for 7.25" Chrysler.
Item #: FDHC-YSPBLT-049
Condition:
New
Price: $27.89
Description: Cross pin shaft for 8.25" Chrysler.
Item #: FDHC-YSPXP-003
Condition:
New
Price: $44.89
Description: Cross pin shaft for Chrysler 7.25".
Item #: FDHC-YSPXP-002
Condition:
New
Price: $44.89
Description: Cross pin shaft for standard open Chrysler 9.25", .860" diameter. Will not fit Posi!
Item #: FDHC-YSPXP-006
Condition:
New
Price: $44.89
Description: Crush Sleeve for Model 35, Chrysler 7.25", 8.25" Ford 8" & GM 7.75". Approx. 0.480" long.
Item #: FDHC-YSPCS-010
Condition:
New
Price: $8.89
Description: Crush Sleeve for Chrysler 8" & 9.25" rear. Approx. 0.630" long.
Item #: FDHC-YSPCS-011
Condition:
New
Price: $10.89
Description: 8.75" Chrysler 89 solid crush sleeve replacement spacer, preload. This item is compatible with '89 case dropouts only.
Item #: FDHC-SK CSC8.75
Condition:
New
Price: $82.89
Description: Crush sleeve eliminator kit for GM 8.5" & Chrysler 9.25"
Item #: FDHC-SK CSGM8.5
Condition:
New
Price: $50.89
Description: Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Item #: FDHC-YPKD44-PC-T/L
Condition:
New
Price: $129.89
Description: Replacement pinion nut washer for Dana 44 JK, 60, 70U, '08 & newer Ford 10.5" & Nissan Titan rear.
Item #: FDHC-YSPPN-030
Condition:
New
Price: $6.89
Description: Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75" Chrysler STD) Dana 70 2PC.
Item #: FDHC-YSPTW-017
Condition:
New
Price: $8.89
Description: Differential carrier side bearing screw adjuster for Chrysler 7.25" and 8.25".
Item #: FDHC-YSPSA-002
Condition:
New
Price: $47.89
Description: Differential side bearing screw adjuster for 9.25" Chrysler.
Item #: FDHC-YSPSA-001
Condition:
New
Price: $42.89
Description: Fill plug for Chrysler 8.75", 3/4" thread
Item #: FDHC-YSPFP-02
Condition:
New
Price: $12.89
Description: Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
Item #: FDHC-BK C8.0-IFS-B
Condition:
New
Price: $274.89