- Home »
- Catalog
Complete Offroad » Chrysler 8.25"
Products for:
- Axle Model: Chrysler 8.25"
View Universal items for: Chrysler 8.25"
Browse Products
Description: Cross pin shaft for 8.25" Chrysler.
Item #: FDHC-YSPXP-003
Condition:
New
Price: $44.89
Description: Crush Sleeve for Model 35, Chrysler 7.25", 8.25" Ford 8" & GM 7.75". Approx. 0.480" long.
Item #: FDHC-YSPCS-010
Condition:
New
Price: $8.89
Description: Differential carrier side bearing screw adjuster for Chrysler 7.25" and 8.25".
Item #: FDHC-YSPSA-002
Condition:
New
Price: $47.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-276
Condition:
New
Price: $499.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-321
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-307
Condition:
New
Price: $556.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-355
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-390
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-411
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-488
Condition:
New
Price: $517.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-373
Condition:
New
Price: $459.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C8.25-456
Condition:
New
Price: $459.89
Description: Model 35 (standard Open & TracLoc) 8.25" Chrysler TracLoc cross pin bolt.
Item #: FDHC-YSPBLT-048
Condition:
New
Price: $14.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion nut for Chrysler 7.25", 8.0" IFS, 8.25", 8.75" fine spline, 9.25" front & rear, 7/16" x 14.
Item #: FDHC-YSPPN-008
Condition:
New
Price: $9.89
Description: Ring gear bolt for C200F front and '05 7 up Chrysler 8.25" rear.
Item #: FDHC-YSPBLT-002
Condition:
New
Price: $10.89
Description: Ring gear bolt for Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS front. 3/8" x 24.
Item #: FDHC-YSPBLT-005
Condition:
New
Price: $8.89
Description: Steel cover for Chrysler 8.25"
Item #: FDHC-YP C5-C8.25
Condition:
New
Price: $166.89
Description: Yukon Axle Shaft for 8.25 5 lug 27 spline Vans from 85-92
Item #: FDHC-YA C4137670
Condition:
New
Price: $282.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
Description: Yukon left hand axle for '05-'11 Dakota 8.25" rear. 29 spline, 5 lug, 33 7/16" long.
Item #: FDHC-YA C68045425AA
Condition:
New
Price: $390.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C8.25-C
Condition:
New
Price: $294.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C8.25-A
Condition:
New
Price: $250.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK C8.25-B
Condition:
New
Price: $256.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C8.25-A
Condition:
New
Price: $33.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK C8.25-B
Condition:
New
Price: $33.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C8.25-A
Condition:
New
Price: $165.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK C8.25-B
Condition:
New
Price: $166.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $149.89
Description: Yukon right hand axle for 2005-2011 Dakota 8.25" rear. 29 spline, 5 lug, 30 5/16" long.
Item #: FDHC-YA C68045424AA
Condition:
New
Price: $301.89
Description: Adjusts the threaded side adjusters for setting backlash and carrier bearing preload. No return.
Item #: FDHC-YT A06
Condition:
New
Price: $185.89
Description: Yukon standard open carrier case for Chrysler 8.25", 29 spline, 2.56 & up, 1997 & up only
Item #: FDHC-YC C52069428
Condition:
New
Price: $509.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKC8.25-S-27
Condition:
New
Price: $292.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKC8.25-S-29
Condition:
New
Price: $292.89
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89
Description: Yukon yoke for Chrysler 7.25" and 8.25" with a 1310 U/joint size. 3.219" snap ring span, 1.062" cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C3723252
Condition:
New
Price: $154.89
Description: Yukon yoke for Chrysler 7.25" and 8.25" with a 7260 U/joint size. 2.125" snap ring span, 1.078" cap diameter. Inside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C3723251
Condition:
New
Price: $286.89
Description: Yukon yoke for Chrysler 7.25" and 8.25" with a 7290 U/joint size. 2.625" snap ring span. 1.125" cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY C4137976
Condition:
New
Price: $378.89
Description: Yukon yoke for Chrysler 8.25" with 27 spline axles and a 1330 U/joint size. 3.625" snap ring span, 1.062" cap diameter. Outside snap ring. This yoke uses straps, with outside snap rings on Jeep...More Details »
Item #: FDHC-YY C52070345
Condition:
New
Price: $342.33
Description: Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Item #: FDHC-YY C52068839
Condition:
New
Price: $171.89