- Home »
- Catalog
Complete Offroad » Ford 7.5"
Products for:
- Axle Model: Ford 7.5"
View Universal items for: Ford 7.5"
Browse Products
Items 61-111 of 111
- Prev
- Page 2 of 2
Description: Yukon flange yoke for Ford 7.5" truck (5" OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY F750602
Condition:
New
Price: $206.89
Description: 7.5" & 8.8" PASENGER CAR ONLY IRS stub axle side seal. Yukon Mighty seal.
Item #: FDHC-YMSF1003
Condition:
New
Price: $44.89
Description: 7.5" C/clip, AG Positraction ~ DISCONTINUED ~.
Item #: FDHC-YSPCC-006
Condition:
New
Price: $50.89
Description: 7.5" Ford cover gasket.
Item #: FDHC-YCGF7.5
Condition:
New
Price: $12.89
Description: 7.5" Ford notched cross pin shaft. Not Auburn gear. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Item #: FDHC-YSPXP-055
Condition:
New
Price: $73.89
Description: 7.5" Ford Yukon Dura Grip Limited Slip 28 Spline Positraction Composite Clutches
Item #: FDHC-YDGF7.5-28
Condition:
New
Price: $787.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2" & 8.5" differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK GM8.5
Condition:
New
Price: $104.89
Description: ABS exciter ring (tone ring) for 7.5" Ford.
Item #: FDHC-YSPABS-016
Condition:
New
Price: $140.89
Description: Axle seal for 5707 OR 1563 bearing. Yukon Mighty seal.
Item #: FDHC-YMS8660S
Condition:
New
Price: $7.89
Description: C/Clip for Chrysler 8.25", Ford 7.5", 8.8", GM 12 bolt car & truck, 8.2", 8.5" & 8.6".
Item #: FDHC-YSPCC-010
Condition:
New
Price: $10.89
Description: Chrome cover for 7.5" Ford.
Item #: FDHC-YP C1-F7.5
Condition:
New
Price: $41.89
Description: Cover bolt for Ford 7.5", 8.8" & 9.75"
Item #: FDHC-YSPBLT-079
Condition:
New
Price: $7.89
Description: Cross pin bolt for Chrysler 8.25", 9.25" rear, Ford 7.5", 8.8", GM 12 bolt car & truck, 7.2" IFs, 7.5", 7.6", 8.0", 8.25" IFS & 8.5".
Item #: FDHC-YSPBLT-038
Condition:
New
Price: $8.89
Description: Crush Sleeve for Model 20, Ford 10.25", 10.5", 7.5", 8.8", 9 3/8", 9" & 9.75". .480" long.
Item #: FDHC-YSPCS-002
Condition:
New
Price: $10.89
Description: 2 piece solid spacer for Ford 8.8 and 7.5.
Item #: FDHC-SK CSF8.8
Condition:
New
Price: $83.89
Description: Ford 7.5" & 8.8" ring gear bolt, standard Open & TracLoc. 7/16" x 20.
Item #: FDHC-YSPBLT-024
Condition:
New
Price: $7.89
Description: Ford 7.5" C/clip, TracLoc & standard Open.
Item #: FDHC-YSPCC-007
Condition:
New
Price: $9.89
Description: Ford 7.5", 8", 8.8", & 9" axle stud.
Item #: FDHC-YSPSTUD-005
Condition:
New
Price: $7.89
Description: Ford OEM steel differential cover
Item #: FDHC-YP C5-F7.5-S
Condition:
New
Price: $87.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-273
Condition:
New
Price: $432.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-308
Condition:
New
Price: $504.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-327
Condition:
New
Price: $659.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-345
Condition:
New
Price: $357.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-373
Condition:
New
Price: $357.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-411
Condition:
New
Price: $396.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F7.5-456
Condition:
New
Price: $396.89
Description: Main Cap stud kit for Ford 7.5", 8.8", 9", 10.25", Dana 44, 60, and 70.
Item #: FDHC-YP TA-1816
Condition:
New
Price: $145.89
Description: Replacement outer oil slinger for Ford 7.5", 8.8", 9", 10.25", Nissan M226 Rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Item #: FDHC-YSPBF-023
Condition:
New
Price: $10.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $27.89
Description: Pinion nut for Ford 7.5", 8", 8.8", 9 3/8" & 9". 1 1/6" socket, 3/4" x 20 thread.
Item #: FDHC-YSPPN-020
Condition:
New
Price: $10.89
Description: Pinion seal for 7.5", 8.8", and 9.75" Ford, and also 1985-'86 9" Ford. Yukon Mighty seal.
Item #: FDHC-YMS3604
Condition:
New
Price: $11.89
Description: Standard Open & TracLoc pinion gear thrust washer for 7.5" Ford.
Item #: FDHC-YSPTW-026
Condition:
New
Price: $13.89
Description: Standard Open side gear thrust washer for 7.5" Ford.
Item #: FDHC-YSPTW-025
Condition:
New
Price: $22.89
Description: Super Carrier Shim kit for Ford 7.5", GM 7.5", 8.2" & 8.5"
Item #: FDHC-SK SS10
Condition:
New
Price: $42.89
Description: Trac Loc spring for Ford 7.5"
Item #: FDHC-YSPSPR-003
Condition:
New
Price: $47.89
Description: TracLoc clutch set (two sides) for 7.5" Ford.
Item #: FDHC-YPKF7.5-PC
Condition:
New
Price: $261.89
Description: Un-notched cross pin shaft for 7.5" Ford. OEM, not Auburn gear.
Item #: FDHC-YSPXP-025
Condition:
New
Price: $40.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
Description: Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the best in heat-treating...More Details »
Item #: FDHC-YA F750015
Condition:
New
Price: $344.89
Description: Left hand axle for Ford 7.5". fits '05-'10 Mustang with ABS. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy axles come with a one year warranty against manufacturing defects. .
Item #: FDHC-YA F750013
Condition:
New
Price: $477.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK F7.5
Condition:
New
Price: $242.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK F7.5
Condition:
New
Price: $52.89
Description: Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings & races along with a high quality pinion seal & small parts
Item #: FDHC-PK F7.5
Condition:
New
Price: $173.89
Description: This tool presets bearings that easily slip on and off bearing journals to allow for easier pinion and carrier shim adjustments. No returns.
Item #: FDHC-YT SB-M802048
Condition:
New
Price: $149.89
Description: Right hand axle for Ford 7.5". fits '05-'10 Mustang with ABS. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy axles come with a one year warranty against manufacturing defects. .
Item #: FDHC-YA F750012
Condition:
New
Price: $477.89
Description: Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the best in heat-treating...More Details »
Item #: FDHC-YA F750014
Condition:
New
Price: $339.89
Description: Yukon standard open carrier case, Ford 7.5"
Item #: FDHC-YC F750500
Condition:
New
Price: $390.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKF7.5-S-28
Condition:
New
Price: $199.89
Description: Stub axle bearing for Ford
Item #: FDHC-YB AX-009
Condition:
New
Price: $50.89
Description: Each driver is contoured to the shim’s outside diameter to apply even, uniform force. No more chipping shims or hammering screwdrivers to set your shims. A few dead blows with a ball-peen hammer is all it takes. No returns.
Item #: FDHC-YT SD-01
Condition:
New
Price: $182.89
Sale: $85.00
Save: 54%
Save: $97.89
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89
Items 61-111 of 111
- Prev
- Page 2 of 2