- Home »
- Catalog
Complete Offroad » Dana 28
Products for:
- Axle Model: Dana 28
View Universal items for: Dana 28
Browse Products
Items 1-40 of 40
Description: 1310 Spicer U/Joint, with zerk fitting in cap.
Item #: DS U-1310-1
Condition:
New
Price: $45.89
Description: Dana 28 crush sleeve, APROX 1.410" long.
Item #: FDHC-YSPCS-008
Condition:
New
Price: $11.89
Description: Replacement left inner stub axle side seal for Dana 28
Item #: FDHC-YMS710065
Condition:
New
Price: $47.89
Description: Pinion and axle seal puller. No return.
Item #: W1219
Condition:
New
Price: $19.99
Description: DANA SPICER'S STRONGEST U-JOINT FOR THE DANA 44 FEATURES A FORGED TRUNNION FOR INCREASED STRENGTH. DIRECT REPLACEMENT FOR 297 STYLE U-JOINTS... DOES NOT have grease zerk (stronger)
4)1.186" caps
3.30" cross
Item #: DS U-760
Condition:
New
Price: $42.03
Description: Fits '98-'04 Mazda B3000 front. 24" long weld to weld.
Item #: FDHD-ZDS9293D
Condition:
New
Not Available
Price: $357.75
Description: Fits '98-'05 Mazda B4000 front. 24" long weld to weld.
Item #: FDHD-ZDS9293E
Condition:
New
Not Available
Price: $357.75
Description: Fits 1989 Ford Ranger front. 26 1/2" long from center of u/joint caps.
Item #: FDHD-ZDS9638
Condition:
New
Price: $420.67
Description: Fits 1988 Ford Ranger front with four speed automatic transmission or five speed manual transmission & STX trim package. 26 1/2" long from center of u/joint caps.
Item #: FDHD-ZDS9638A
Condition:
New
Price: $360.73
Description: Fits 1987 Ford Ranger front with four speed automatic transmission, 2.9L engine & STX trim package. 26 1/2" long from center of u/joint caps.
Item #: FDHD-ZDS9641
Condition:
New
Price: $420.67
Description: Fits 1987 Ford Ranger front with five speed manual transmission & 2.9L engine. 26 1/2" long from center of u/joint caps.
Item #: FDHD-ZDS9641A
Condition:
New
Price: $360.73
Description: Fits '95-'97 Ford Ranger front with 4.0L engine. 29 7/16" long from center of u/joint caps.
Item #: FDHD-ZDS9661A
Condition:
New
Price: $354.77
Description: Fits '93'-94 Ford Ranger front with 4.0L engine & four speed automatic or five speed manual transmission. 29 7/16" long from center of u/joint caps.
Item #: FDHD-ZDS9661B
Condition:
New
Price: $354.77
Description: Fits '90-'92 Ford Ranger front. 29 7/16" long from center of u/joint caps.
Item #: FDHD-ZDS9661C
Condition:
New
Price: $354.77
Description: Make quick work of the often-tedious removal of bearing races. Brass construction is corrosion resistant and wont chip or shatter. No returns.
Item #: FDHC-YT P21
Condition:
New
Price: $113.89
Sale: $50.00
Save: 56%
Save: $63.89
Description: Yukon bearing install kit for Dana 28 differential. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and...More Details »
Item #: FDHC-BK D28
Condition:
New
Price: $239.14
Description: This precision-machined driver is designed to accurately install bearing races. No returns.
Item #: FDHC-YT BD-M86610
Condition:
New
Price: $195.89
Description: This precision-machined driver is designed to accurately install bearing races. No returns.
Item #: FDHC-YT BD-M88010
Condition:
New
Price: $201.89
Description: This 21-piece bearing race driver set will work on a vast majority of differentials. (Box weight: 140 lbs) No returns.
Item #: FDHC-YT BDSET
Condition:
New
Price: $1,538.89
Sale: $1,250.00
Save: 19%
Save: $288.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes for a clean, quick and simple way to remove a bearing quickly and without risk. No returns.
Item #: FDHC-YT P20
Condition:
New
Price: $703.89
Description: This tool helps set the proper carrier bearing preload. No returns.
Item #: FDHC-YT S01
Condition:
New
Price: $688.89
Description: 8.25" Chrysler, Model 35, D36 ICA, & Dana 28 TracLoc clutch set.
Item #: FDHC-YPKC8.25-PC-T/L
Condition:
New
Price: $176.89
Description: Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560" side gear bore only.
Item #: FDHC-YSPTW-015
Condition:
New
Price: $10.89
Description: Dana 28 (93^) & Model 35 outer axle/hub snap ring.
Item #: FDHC-YSPSR-008
Condition:
New
Price: $7.89
Description: Dana 28 right and Dana 36 left and right, replacement inner axle seal (2.175" OD).Yukon Mighty seal.
Item #: FDHC-YMS3543
Condition:
New
Price: $50.89
Description: Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside axle snap ring (next to side gear).
Item #: FDHC-YSPSR-007
Condition:
New
Price: $7.89
Description: Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Item #: FDHC-YSPSR-005
Condition:
New
Price: $8.89
Description: Replacement outer slinger for Dana 28
Item #: FDHC-YSPBF-017
Condition:
New
Price: $6.89
Description: Replacement pinion seal for Dana 28 .Yukon Mighty seal.
Item #: FDHC-YMSS1003
Condition:
New
Price: $32.89
Description: Side bearing for Corvette, Dana 36 & Dana 28
Item #: FDHC-YB AX-012
Condition:
New
Price: $26.89
Description: Spindle bearing & seal kit for 1993-1996 Ford Dana28, Model 35 IFS & Dana 44 IFS. This replaces Spicer part number 707316X.
Item #: FDHC-YSPSP-029
Condition:
New
Price: $48.89
Description: Spindle nuts for Ford '83-'89 Bronco II and Ranger.
Item #: FDHC-YP W27988
Condition:
New
Price: $177.89
Description: Spindle nuts for Ford '90-'97 Explorer and Ranger.
Item #: FDHC-YP W32720
Condition:
New
Price: $62.89
Description: These bearing pullers simplify bearing removal for those without a press. They feature different clamshell sizes and will work on 1-ton applications including Dana 70HD, Dana 80, Ford 10.25" & 10.5", or GM & Chrysler 11.5". No returns.
Item #: FDHC-YT P22
Condition:
New
Price: $816.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to...More Details »
Item #: FDHC-YK D28
Condition:
New
Price: $529.14
Description: Yukon Minor install kit for Dana 28 differential. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Item #: FDHC-MK D28
Condition:
New
Limited Supply: Only 5 Left!
Price: $239.14
Description: Yukon pinion install kit for Dana 28 differential. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and...More Details »
Item #: FDHC-PK D28
Condition:
New
Limited Supply: Only 5 Left!
Price: $201.27
Description: This tool securely holds the yoke to provide leverage while working on the differential. No returns.
Item #: FDHC-YT YH-01
Condition:
New
Price: $158.89
Description: Yukon yoke for Dana 28. 3.219" snap ring span, 1.062" cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Item #: FDHC-YY D28-1310-23S
Condition:
New
Price: $87.89
Items 1-40 of 40