- Home »
- Catalog
Complete Offroad » Drivetrain
Products for:
- Category: Drivetrain
View Universal items for: Drivetrain
Browse Products
Description: 3/8" cover bolt, Dana 60, Dana 70 & Dana 80.
Item #: FDHC-YSPBLT-053
Condition:
New
Price: $7.89
Description: Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Item #: FDHC-YY STR-003
Condition:
New
Price: $28.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $19.89
Description: Dana 70 & Dana 80 pinion gear Thrust washer.
Item #: FDHC-YSPTW-018
Condition:
New
Price: $10.89
Description: Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Item #: FDHC-YSPXP-019
Condition:
New
Price: $62.89
Description: Dana 80 ABS exciter tone ring.
Item #: FDHC-YSPABS-008
Condition:
New
Not Available
Price: $160.89
Description: Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).
Item #: FDHC-YPKD80-PC-T/L
Condition:
New
Price: $451.89
Description: Differential carrier side bearing screw adjuster for Chrysler 7.25" and 8.25".
Item #: FDHC-YSPSA-002
Condition:
New
Price: $47.89
Description: Differential side bearing screw adjuster for 9.25" Chrysler.
Item #: FDHC-YSPSA-001
Condition:
New
Price: $42.89
Description: Dodge Magna/Steyr front pinion nut
Item #: FDHC-YSPPN-039
Condition:
New
Price: $60.89
Description: Eaton Positraction shim kit for GM 14T.
Item #: FDHC-YPKGM14T-PC-SHI
Condition:
New
Price: $73.89
Description: Eaton Positraction shim kit for 9.5" GM.
Item #: FDHC-YPKGM9.5-PC-SHI
Condition:
New
Price: $37.89
Description: Eaton-type 14 plate Carbon clutch set for 9.5" GM and 9.75" Ford.
Item #: FDHC-YPKGM9.5-PC-14
Condition:
New
Price: $350.89
Description: Eaton-type Positraction Carbon clutch kit with 14 plates for GM 14T and 10.5"
Item #: FDHC-YPKGM14T-PC-14
Condition:
New
Price: $313.89
Description: Fill plug for Ford 9", 1/2" thread
Item #: FDHC-YSPFP-01
Condition:
New
Price: $12.89
Description: Fine thread pinion support bolt (aftermarket aluminum only) for 9" Ford.
Item #: FDHC-YSPBLT-061
Condition:
New
Price: $8.89
Description: Finned aluminum cover for Dana 80
Item #: FDHC-YP C5-D80-A
Condition:
New
Price: $212.89
Description: AAM 11.5" Finned aluminum cover for Dodge & GM
Item #: FDHC-YP C5-C11.5
Condition:
New
Price: $448.89
Description: Finned aluminum cover for Ford 10.5", '08 & Up
Item #: FDHC-YP C5-F10.5
Condition:
New
Price: $155.89
Description: Finned Polished aluminum cover for AMC Model 20.
Item #: FDHC-YP C2-M20
Condition:
New
Price: $269.89
Description: Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
Item #: FDHC-BK C8.0-IFS-B
Condition:
New
Price: $274.89
Description: Flat side gear without hub for 8" and 9" Ford with 28 splines.
Item #: FDHC-YPKF9-SG-04
Condition:
New
Price: $48.89
Description: Flat side gear without hub for 9" Ford with 31 splines.
Item #: FDHC-YPKF9-SG-02
Condition:
New
Price: $44.89
Description: 10.25" & 10.5" cover gasket.
Item #: FDHC-YCGF10.25
Condition:
New
Price: $14.89
Description: Ford 10.25" C/clip.
Item #: FDHC-YSPCC-005
Condition:
New
Price: $23.89
Description: Ford 7.5" & 8.8" ring gear bolt, standard Open & TracLoc. 7/16" x 20.
Item #: FDHC-YSPBLT-024
Condition:
New
Price: $7.89
Description: Ford 7.5" C/clip, TracLoc & standard Open.
Item #: FDHC-YSPCC-007
Condition:
New
Price: $9.89
Description: Ford 8" & 9" standard Open, AG, & Detroit locker ring gear bolt, 1.0" long, Ford.
Item #: FDHC-YSPBLT-013
Condition:
New
Price: $7.89
Description: Ford 8" & 9" standard Open, AG, & Detroit locker ring gear bolt. 7/16" head, .925" long.
Item #: FDHC-YSPBLT-029
Condition:
New
Price: $8.89
Description: Ford 8" & 9" TracLoc ring gear bolt, 1-1/4" long.
Item #: FDHC-YSPBLT-014
Condition:
New
Price: $6.89
Description: 8.8" Reverse inner pinion bearing oil baffle.
Item #: FDHC-YSPBF-007
Condition:
New
Price: $13.89
Description: Nodular Daytona style pinion support, Heavy Duty, includes races 9" Ford.
Item #: FDHC-YP F9PS-4
Condition:
New
Price: $207.89
Description: Nodular Daytona style pinion support, Heavy Duty, 9" Ford. (No races)
Item #: FDHC-YP F9PS-4-BARE
Condition:
New
Price: $157.89
Description: Ford 9" pinion Support, 35 spline, 10 hole, no races included.
Item #: FDHC-YP F9PS-5
Condition:
New
Price: $565.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP DOF9-3-306
Condition:
New
Price: $771.89
Description: Yukon aluminum dropouts feature an adjuster lock which is offset 90 degrees, offering an uninterrupted bearing cap for higher strength. Made from A356-T6 aluminum and featuring a through-bolt design, this dropout is rated at 1,000 hp.
Item #: FDHC-YP DOF9-3-325
Condition:
New
Price: $720.89
Description: Ford 9.75" ring gear bolt. 12mm x 1.25.
Item #: FDHC-YSPBLT-015
Condition:
New
Price: $10.89
Description: Ford OEM steel differential cover
Item #: FDHC-YP C5-F7.5-S
Condition:
New
Price: $87.89
Description: 14T cover gasket.
Item #: FDHC-YCGGM14T
Condition:
New
Price: $14.89
Description: 12T cover gasket.
Item #: FDHC-YCGGM12T
Condition:
New
Price: $12.89
Description: GM 12 bolt truck crush sleeve, 2.350" long.
Item #: FDHC-YSPCS-022
Condition:
New
Price: $12.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $15.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $10.89
Description: GM 8.25" IFS case gasket, 2007 & up
Item #: FDHC-YCGGM8.25IFS
Condition:
New
Price: $35.89
Description: GM 8.25" IFS side adjuster, '07 & up
Item #: FDHC-YSPSA-010
Condition:
New
Price: $81.89
Description: 8.25IFS 07 & up GM side bearing adjuster lock ring.
Item #: FDHC-YSPSA-011
Condition:
New
Price: $34.89
Description: GM 9.25" IFS side adjuster lock, '11 & up.
Item #: FDHC-YSPSA-013
Condition:
New
Price: $36.89
Description: 9.25IFS GM 11 & up side bearing adjuster.
Item #: FDHC-YSPSA-012
Condition:
New
Price: $61.89
Description: GM 9.25" IFS snap ring for outer stub.
Item #: FDHC-YSPSR-012
Condition:
New
Price: $9.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades.
Item #: FDHC-CK GM9.5
Condition:
New
Price: $207.89
Description: GM 9.5" ring gear bolt. 12mm x 1.5.
Item #: FDHC-YSPBLT-017
Condition:
New
Price: $13.89
Description: GM 9.76" & 2014 & up GM 9.5" 12 bolt cover gasket
Item #: FDHC-YCGGM9.5-B
Condition:
New
Price: $38.89
Description: GM side gear spacer sleeve for GM 9.25" IFS
Item #: FDHC-YSPTW-074
Condition:
New
Price: $37.89
Description: Grease kit (4 oz. tube) and grease Gun (4 oz. gun).
Item #: FDHC-YP SJ-ACC-403
Condition:
New
Price: $155.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-571-29
Condition:
New
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-411T
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-456
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-538
Condition:
New
Price: $479.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D44-589
Condition:
New
Price: $432.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-354
Condition:
New
Price: $680.89