ICON Vehicle Dynamics 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT - 22025

The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.

2.5" front lift height on Wrangler/2" front lift on GladiatorFits 35" tires (37" with optional bump stop spacer kit PN: 22029)3" front increase in wheel travel (when paired with ICON shocks)Improves on and off-road ride quality over stockDual rate coil springs with lifetime guarantee against sagging/breakage100% bolt-on system makes for an easy install“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability

Bump Stops Included: Yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Finish: Powdercoated
Front Spring Rate Type: Variable
Front Spring Seat Included: No
Grade Type: Performance
Maximum Lift Height: 2.5
OEM Wheels & Tires Fitment: Yes
Rear Spring Seat Included: No
Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional extended bump stop spacer kit PN: 22029)
Recommended Aftermarket Wheels: (Non-Rubicon) ICON Alloys - 17x8.5 w/ 4.5" Backspace / -6mm Offset
Recommended Aftermarket Wheels: (Rubicon) ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: (Non-Rubicon) ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: (Rubicon) ICON Alloys - 17x8.5 w/ 4.75" Backspace / 0mm Offset
Recommended Aftermarket Wheels: (Rubicon) ICON Alloys - 20x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: (Non-Rubicon) ICON Alloys - 20x9 w/ 4.5" Backspace / -12mm Offset
Spring Color: Black
Spring Material: Steel
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.5” Backspace / -6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.5” Backspace / -12mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 4.5” Backspace / -12mm Offset;Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: 22029);TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL/JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.;TECH NOTE: Wrangler JL 4-door will have front lift height of 2.5" over stock;TECH NOTE: Wrangler JL 2-door will have front lift height of 3" over stock;TECH NOTE: Gladiator JT will have front lift height of 2" over stock;TECH NOTE: Diesel models will net approx. 1.75" of lift over stock due to their heavier weight.;TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims. See ICON Help Center for more information.

ICON 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT