Home - Return to Previous Page

ICON Vehicle Dynamics 17-24 FSD 3-6" REAR 2.5 VS PB CDEV PAIR - 37701EP

FRDK-37701EP
ICON Vehicle Specific 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured for each application in both length and damping tune.
Pricing: $1,899.95
Qty:

Description

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are fully rebuildable and re-tunable. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle.Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.

ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compressionOne-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finishPiggyback reservoir design improves heat dissipation to reduce shock fade during prolonged usePremium grade 5WT shock oil for consistent suspension damping along a wide temperature rangeOne-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road7/8” diameter induction hardened, chrome plated shock shaftPTFE lined spherical bearings and application specific mounting hardware6061 aircraft grade aluminum CNC machined componentsFully rebuildable and re-tunable

Add-On Part: 93500 - 15-23 F150 & 17-22 FSD IIC INSTALL KIT
Add-On Part: 61721E - 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
Add-On Part: 67820EP - 17-22 FSD 4WD 7" FRONT 2.5 VS RR CDEV PAIR
Add-On Part: 67810EP - 17-22 FSD 4WD 4.5" FRONT 2.5 VS RR CDEV PAIR
Add-On Part: 93502 - 23-24 FSD IIC INSTALL KIT
Adjustable: Yes
Adjustable Damping: Yes
Boot Included: NO
Bore Diameter: 2.25
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Cylinder Color: Gray
Cylinder Diameter: 2.5
Cylinder Material: Aluminum
Damping Adjustment Type: Electronic
Damping Type: Oil
External Reservoir: Yes
Gas Charged: Yes
Grade Type: Performance
Lower Mount Type: Eyelet
Mounting Hardware Included: Yes
Service Parts: 254100G - 1 GALLON ICON PERFORMANCE SHOCK OIL
Service Parts: 191015 - 10" FINNED RESI UPGRADE KIT
Service Parts: 252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT
Service Parts: 257344 - 7/8 SHAFT 18.85 OAL, 14.00 TRAVEL
Shaft Diameter: 0.875
Shaft Material: Chrome
Shock Absorber Body End Measuring Point: Center of Eylet
Shock Absorber Rod End Measuring Point: Center of Eylet
TECH NOTE: Compatible with 3-6” of rear lift over stock;TECH NOTE: 2017-2022 models also require installation of IIC part number 93500 and CDEV front shock part number 67810EP or 67820EP or CDEV front coilover kit part number 61721E;TECH NOTE: 2023-2024 models also require installation of IIC part number 93502 and CDEV front shock part number 67820EP;TECH NOTE: An iOS operated device is required to run ICON Intelligent Control App;TECH NOTE: Will not fit F-350 Cab & Chassis models

ICON 17-24 FSD 3-6" REAR 2.5 VS PB CDEV PAIR

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 35.0 lbs.
  • W15.0000” x H9.0000” x L39.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.