Home - Return to Previous Page
ICON Vehicle Dynamics 07-14 FJ/03-24 4RNR/03-23 GX REAR ADJ TRACK BAR KIT - 54200
FRDK-54200
Optimize your rig’s handling and rear axle alignment to avoid premature tire wear and unwanted handling characteristics, especially on lifted vehicles. Bar installs easily and can be adjusted on the vehicle to properly center the rear axle.
Pricing:
$368.95
Description
The ICON Tubular Rear Track Bar helps center the axle of your lifted 2003-2024 Toyota 4Runner, 2003-2023 Lexus GX, or 2007-2014 Toyota FJ Cruiser to allow for increased suspension travel and articulation. An FK 3/4” Rod End at one end, along with a dual-stage, greaseable polyurethane bushing at the other end yields the best combination of maximum travel and articulation while isolating and damping road noise and vibrations. ICON’s exclusive rod end Double Adjuster Sleeve allows for fast, easy “on-vehicle” adjustment of track bar length without requiring removal or disassembly of the track bar. This allows for easy correction of axle location and dialing in precise tracking whenever adjustments are made to ride height. The track bar is made of CNC bent 1¼ x .250 wall 1026 DOM tubing with CNC machined threaded end and bushing housing. It has a multi-stage black powder coat finish. Hit the trail with the confidence of knowing your suspension components are covered by ICON’s Limited Lifetime Warranty.While highly recommended for all FJ, 4Runner and GX builds, Kinetic Dynamic Suspension System (KDSS) equipped vehicles require this adjustable rear track bar to increase clearance from the KDSS components as the suspension approaches full extension.
Helps to free up bind during rear suspension travel and articulationHeavy Duty PTFE-lined FK Rod End for maximum articulationOn-vehicle adjustable for precise track alignment using ICON’s double adjusterGreasable dual stage polyurethane bushing for maximum angularity and noise isolationCNC machined and bent 1-1/4" X .250 wall 1026 DOM tubingMulti-stage black powder coat finish
Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH
Adjustable: Yes
Bushing Color: Black
Bushing Material: Polyurethane
Bushings Included: yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Color: Black
End 1 Type: Bushing
End 2 Type: Rod End Bearing
Finish: Powdercoated
Grade Type: Performance
Grease Fitting Included: Yes
Greaseable: Yes
Material: DOM Steel
Mounting Hardware Included: Yes
Service Parts: 614511 - 54200 BUSHING AND SLEEVE KIT
ICON 07-14 FJ/03-24 4RNR/03-23 GX REAR ADJ TRACK BAR KIT
Helps to free up bind during rear suspension travel and articulationHeavy Duty PTFE-lined FK Rod End for maximum articulationOn-vehicle adjustable for precise track alignment using ICON’s double adjusterGreasable dual stage polyurethane bushing for maximum angularity and noise isolationCNC machined and bent 1-1/4" X .250 wall 1026 DOM tubingMulti-stage black powder coat finish
Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH
Adjustable: Yes
Bushing Color: Black
Bushing Material: Polyurethane
Bushings Included: yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Color: Black
End 1 Type: Bushing
End 2 Type: Rod End Bearing
Finish: Powdercoated
Grade Type: Performance
Grease Fitting Included: Yes
Greaseable: Yes
Material: DOM Steel
Mounting Hardware Included: Yes
Service Parts: 614511 - 54200 BUSHING AND SLEEVE KIT
ICON 07-14 FJ/03-24 4RNR/03-23 GX REAR ADJ TRACK BAR KIT
Details
- FRDK-54200
- FRDK-54200
- Icon Vehicle Dynamics
- New
Shipping Information
- Item Requires Shipping
- 14.0 lbs.
- W3.0000” x H3.0000” x L43.0000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!