ICON Vehicle Dynamics 24 TACOMA 2.5 VS RR CDEV COILOVER KIT - 58780E

ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2024 Toyota Tacoma. These adjustable coilovers allow up 1.25-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving, their large 2.5” shock body with increased piston surface area over stock components, and their pairing with an ICON front differential drop (4WD only), yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly. When paired with ICON 2.5 Aluminum Series CDEV rear shock absorbers, vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tacoma.

Parts begin shipping spring 2024!Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stockVehicle specific shock length and pairing with front differential drop yields maximum wheel travelHeight-adjustable coilovers offer 1.25-3" of lift height adjustment over stock2.5" diameter shock bodies with remote reservoirsRemote reservoirs maintain cooler operating temperatures during extended off-road useICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)ICON engineered coil springs6061 Aircraft grade aluminum CNC machined componentsCorrosion resistant CAD plated shock bodies with 7/8" diameter shaftsFK rod end bearings for extended longevity and minimal deflectionFully rebuildable and re-tunable

Add-On Part: 198001 - BILLET SPANNER WRENCH KIT
Add-On Part: 58452DJ - 24 TACOMA/24 LC250 TUBULAR UCA DJ PRO KIT
Add-On Part: 252012 - -4 TO -10 HOSE SHIELD KIT
Add-On Part: 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
Add-On Part: 57808EP - 24 TACOMA 0-1" REAR 2.5 VS RR CDEV PAIR
Add-On Part: 55160 - 24 TACOMA/24 LC250 DIFF DROP KIT
Add-On Part: 58552DJ - 24 TACOMA/24 LC250 BILLET UCA DJ PRO KIT
Add-On Part: 53509 - 24 TACOMA/24 LC250 IIC INSTALL KIT
Adjustable Damping: Yes
Adjustable Height: Yes
Body Diameter: 2.5
Boot Included: No
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Coil Over Springs Included: Yes
Damping Adjustment Type: Electronic
Damping Type: Oil
Dust Shield Included: No
Gas Charged: Yes
Grade Type: Performance
Lower Mount Type: Eyelet
Material: Aluminum
Material: Steel
Maximum Lift: 3
Minimum Lift: 1.25
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 33" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
Recommended Aftermarket Wheels: ICON Alloys - 18x9 with 6.00” Backspace / 25mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 5.75” Backspace / 25mm Offset
Remote Reservoir: Yes
Shaft Diameter: 0.875
Shock Absorber Body End Measuring Point: Top of Upper Mount Plate
Shock Absorber Rod End Measuring Point: Center of Eyelet
Spring Color: Black
Spring Material: Steel
Spring Rate Type: Linear
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 5.75” Backspace / 25mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9 with 6.00” Backspace / 25mm Offset;Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.);APPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.;APPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.;APPLICATION NOTE #169: 4WD models require front differential drop part # 55160;TECH NOTE: ICON Delta Joint Pro front upper control arms are recommended to maintain proper wheel alignment above 2" of lift;TECH NOTE: Also requires installation of IIC kit (Part # 53509) and CDEV rear shocks (Part # 57808EP);TECH NOTE: An iOS operated device is required to run ICON Intelligent Control App;TECH NOTE: Will not fit 2024 Toyota Tacoma TRD PreRunner

ICON 24 TACOMA 2.5 VS RR CDEV COILOVER KIT