ICON Vehicle Dynamics 21-23 F150 4WD FRONT KNUCKLE KIT - 94000

Upgrade your 2021-2023 Ford F-150 4WD to a Tremor “conversion” with the F-150 Front Knuckle Kit from ICON Vehicle Dynamics. The steering knuckle’s design replicates the suspension geometry of the Ford F-150 Tremor and when paired with ICON F-150 Tremor coilover kits the combination offers a 20% increase in front wheel travel, increased ride height with 3.5-4.5” of front lift over stock, as well as improved ball joint angles. Their single piece, high-strength CNC machined ductile iron construction ensures strength and have been engineered to withstand the stresses of aggressive off-road use while minimizing un-sprung weight and maintaining factory track width. These steering knuckles will stand the test of time with a durable black powder coat finish and are backed by ICON’s Limited Lifetime Warranty.

Single piece high-strength ductile iron steering knucklesReplicates F-150 Tremor suspension geometry for increased wheel travel, taller ride height, and improved ball joint anglesMaintains factory track widthEngineered to withstand the stresses of aggressive off-road usePrecision CNC machinedPocketed design to minimize un-sprung weightDurable powder coat finish for corrosion resistanceICON Limited Lifetime Warranty

Axle Included: No
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Color: Black
Finish: Powdercoated
Grade Type: Performance
Hub Included: No
Instruction Manual Included: Yes
Material: Ductile Iron
Mounting Hardware Included: No
Factory Wheels & Tires Fitment: Not compatible with all available OE wheel/tire combinations. Aftermarket wheels with lower offset/less backspace recommended.;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5” Backspace / 6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.625" Backspace / 16mm Offset;Recommended Aftermarket Tires: 34" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required);APPLICATION NOTE #129: Will Not Work With Factory Installed Electronically Controlled Suspension;APPLICATION NOTE #152: ICON Delta Joint Pro Upper Control Arms Required;TECH NOTE: Only compatible with F-150 4-wheel drive (4WD) models;TECH NOTE: Requires ICON front coilvover kit part numbers 91723, 91824, 91824C, or 91824E;TECH NOTE: Not compatible with F-150 Raptor;TECH NOTE: Not compatible with models equipped with BlueCruise

ICON 21-23 F150 4WD FRONT KNUCKLE KIT