Home - Return to Previous Page

ICON Vehicle Dynamics 20-23 GLADIATOR 2" STAGE 1 SUSPENSION SYSTEM - K22101

FRDK-K22101
2020-UP JEEP GLADIATOR JT 2.5" STAGE 1 SUSPENSION SYSTEM
Pricing: $1,447.60
Qty:

Description

Aimed at drastically improving (not just maintaining) on and off-road ride quality the ICON Jeep Gladiator JT Stage 1 system includes front dual rate coil springs, rear billet aluminum coil spacers, 2.0 Aluminum Series shocks, front bump stops, adjustable sway bar end links, and all necessary hardware for a complete install. The JT is a very capable vehicle off of the showroom floor and with the addition of an ICON suspension system this capability is only expanded upon with improved suspension geometry and more robust components resulting in significant performance gains.Through an accelerated testing process dubbed the “ICON1K” R&D program, ICON has logged over a thousand miles in the dirt pushing the JT to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2” suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running. By removing the aforementioned “limiting factors” this ICON suspension system completely redefines the potential of the 2020-2023 Jeep Gladiator with wheel travel gains over 30%!

2" front lift height over stockFits 35" tires (37" with extended bump stop spacer kit)33% front, 23% rear increase in wheel travelImproves on and off-road ride quality over stockDual rate coil springs with lifetime guarantee against sagging/breakageBillet aluminum rear 1.375" coil spacers eliminate the factory rake2.0 Aluminum Series shocks with vehicle specific valvingAdjustable, billet aluminum front sway bar links100% bolt-on system makes for an easy install“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability

Add-On Part: 22071 - 20-UP JT EXTENDED BUMP STOP SPACER KIT
Add-On Part: 22042 - 20-UP JT / 18-UP JL / 07-18 JK FRONT HYD BUMP STOP KIT
Adjustable Damping: No
Bushings Included: Yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Coil Spring End 1 Type: Open
Coil Spring End 2 Type: Open
Coils Quantity Front: 2
Front Spring Rate Type: Progressive Dual Rate
Grade Type: Performance
Maximum Lift Front: 2
Maximum Lift Rear: 1.38
Mounting Hardware Included: Yes
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit part # 22071)
Recommended Aftermarket Wheels: ICON Alloys - 20x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 w/ 4.5" Backspace / -6mm Offset
Shocks Included: Yes
Spring Color: Black
Spring Material: Steel
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.5” Backspace / -6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.5” Backspace / -12mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 4.5” Backspace / -12mm Offset;Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit PN: 22071);APPLICATION NOTE #30: An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength;APPLICATION NOTE #127: Will Not Fit Gladiator Mojave Trim;APPLICATION NOTE #150: Shocks Are Fully Serviceable;TECH NOTE: Diesel models will net approx. 1.75" of front lift over stock due to their heavier weight.;TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.

ICON 20-23 GLADIATOR 2" STAGE 1 SUSPENSION SYSTEM

Details

Shipping Information

  • Item Requires Shipping
  • 53.0 lbs.
  • W13.0000” x H7.0000” x L21.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.